• 설비공학논문집
• /
• 제12권1호
• /
• pp.26-32
• /
• 2000

Design load calculations which depend on the thermal characteristics of the building structure such as the wall, roof, and fenestration provide the basic data for selecting an HVAC system and its equipment. Most of domestic multi-family houses include a high thermal storage layer like massive concrete structure and a floor heating structure. This study is to compare the results of the design heating load between steady state and unsteady state calculation in order to comprehend the thermal storage effect in multi-family houses. The design heating load under the steady state calculation is estimated from 5.4% to 7.8% larger than that under the unsteady state in the typical floor of a multi-family house model. The design heating load considered the safety factors like a orientation and location factor also is 21.4% to 26.5% larger than that by the unsteady state calculation. So, the safety factors for use of the practicing engineer are analyzed as the main factor of a heating plant oversizing.

• Mass Spectrometry Letters
• /
• 제13권3호
• /
• pp.49-57
• /
• 2022

During electrospray ionization mass spectrometry (ESI-MS) analysis of proteins, the addition of supercharging agents allows for adjusting the maximal charge state, affecting the charge state distribution, and increases the number of ions reaching the detector thus, improving signal detection. We postulate that in di-substituted arene isomers, molecules with higher polarizability values should generate greater interactions and hence elicit higher signal intensities. Polarizability is an electronic parameter which has been demonstrated to predict many chemical interactions. Many properties can be predicted based on charge polarization. Molecular polarizability is a vital descriptor for explaining intermolecular interactions. We employed DFT (density functional/Hartree-Fock hybrid model, B3LYP)-derived descriptors and computed molecular polarizability for ten disubstituted arene reagents, each set made up of three (ortho, meta, para) isomers, with reported use as supercharging reagents during ESI experiments. The atomic electronic inputs were ionization potential (IP), electron affinity (EA), electronegativity (𝛘), hardness (η), chemical potential (µ), and dipole moment (D). We determined that the para isomers showed the highest polarizability values in nine of the ten sets. There was no difference between the ortho and meta isomers. Polarizability also increased with increasing complexity of the substituents on the benzene ring. Polarizability correlated positively with IP, EA, 𝛘, η, and D but correlated negatively with chemical potential. This DFT study predicts that the para isomers of di-substituted arene isomers should elicit the strongest ESI responses. An experimental comparison of the three isomers, especially of larger supercharging molecules, could be carried out to establish this premise.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.138-147
• /
• 2017

As the functions and structure of the system are complicated and elaborated, various types of structures are emerging to increase reliability in order to cope with a system requiring higher reliability. Among these, standby systems with standby components for each major component are mainly used in aircraft or power plants requiring high reliability. In this study, we consider a standby system with a multi-functional standby component in which one standby component simultaneously performs the functions of several major components. The structure of a parallel system with multifunctional standby components can also be seen in real aircraft hydraulic pump systems and is very efficient in terms of weight, space, and cost as compared to a basic standby system. All components of the system have complete operation, complete failure, only two states, and the system has multiple states depending on the state of the component. At this time, the multi-functional standby component is assumed to be in a non-operating standby state (Cold Standby) when the main component fails. In addition, the failure rate of each part follows the Weibull distribution which can be expressed as increasing type, constant type, and decreasing type according to the shape parameter. If the Weibull distribution is used, it can be applied to various environments in a realistic manner compared to the exponential distribution that can be reflected only when the failure rate is constant. In this paper, Markov chain analysis method is applied to evaluate the reliability of multi-functional multi-state standby system. In order to verify the validity of the reliability, a graph was generated by applying arbitrary shape parameters and scale parameter values through Excel. In order to analyze the effect of multi-functional multi-state standby system using Weibull distribution, we compared the reliability based on the most basic parallel system and the standby system.

• 한국비블리아학회지
• /
• 제17권2호
• /
• pp.115-136
• /
• 2006

국무회의록은 국정 전반의 의사결정 내용을 종합적으로 보여주는 최고위 기록이며, 특히 이승만 시기의 국무회의록은 사안의 중요성과 상대적인 충실성에 있어서 다른 시기에 비해 남다른 가치를 지닌다. 본 연구는 공공기록으로서 국무회의록을 대상으로 연구자는 물론 일반 독자들도 쉽게 역사적 사실에 접근하고 이를 구조적으로 이해할 수 있는 역사컨텐츠 개발을 위한 방법론을 제시하는 것이다. 이를 위해 첫째. 이승만 시기 국무회의록의 내용을 재구성하고 회의 안건들을 위한 DB 설계방법을 제안하였다. 둘째, 안건들을 분석하여 이를 주제사안 분류체계와 연계하고, 각 주제사안별로 부처기록을 연계할 수 있는 방안을 제안하였다. 셋째, 이를 토대로 각 주제사안 별로 역사적 사실을 해석하여 이를 컨텐츠로 개발하는 절차를 제안하였다. 이러한 컨텐츠 방법론은 앞으로 공공기록의 활용범위를 확장하고, 아울러 정치, 경제, 사회 각 영역에 걸친 당대의 정책 사안들을 실증적으로 연구하고 해석할 수 있는 기록정보컨텐츠 개발에 일조할 수 있을 것이다.

• ETRI Journal
• /
• 제24권4호
• /
• pp.328-331
• /
• 2002

We investigated the electrical characteristics of p-channel double-diffused MOSFETs (p-LDMOSFETs) with an uneven racetrack source (URS) and a conventional racetrack source (CRS) for PDP driver IC applications. The breakdown voltage of the p-LDMOSFET with the URS in offstate was nearly the same as the p-LDMOSFET with the CRS. However, the breakdown voltage of the p-LDMOSFET with the URS in on-state was about 30% higher than that of the p-LDMOSFET with the CRS, while the saturated drain current of the p-LDMOSFET with the URS was only about 4% lower than that of the p-LDMOSFET with the CRS.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3218-3222
• /
• 2013

The aminolyses, anilinolysis and pyridinolysis, of bis(2-oxo-3-oxazolidinyl) phosphinic chloride (1) have been kinetically investigated in acetonitrile at 55.0 and $35.0^{\circ}C$, respectively. For the reactions of 1 with substituted anilines and deuterated anilines, a concerted SN2 mechanism is proposed based on the selectivity parameters and activation parameters. The deuterium kinetic isotope effects ($k_H/k_D$) invariably increase from secondary inverse to primary normal as the aniline becomes more basic, rationalized by the transition state variation from a backside to a frontside attack. For the pyridinolysis of 1, the authors propose a stepwise mechanism with a rate-limiting step change from bond breaking for more basic pyridines to bond formation for less basic pyridines based on the selectivity parameters and activation parameters. Biphasic concave upward free energy relationship with X is ascribed to a change in the attacking direction of the nucleophile from a frontside attack with more basic pyridines to a backside attack with less basic pyridines.

• 한국환경과학회지
• /
• 제3권4호
• /
• pp.349-356
• /
• 1994

The purpose of this study is to develop a linear reservoir model with Kalman filter using Kalman filter theory which removes a physical uncertainty of :ainfall-runoff process. A linear reservoir model, which is the basic model of Kalman filter, is used to calculate runoff from rainfall in river basin. A linear reservoir model with Kalman filter is composed of a state-space model using a system model and a observation model. The state-vector of system model in linear. The average value of the ordinate of IUH for a linear reservoir model with Kalman filter is used as the initial value of state-vector. A .linear reservoir model with Kalman filter shows better results than those by linear reserevoir model, and decreases a physical uncertainty of rainfall-runoff process in river basin.

• 한국초등과학교육학회지:초등과학교육
• /
• 제27권4호
• /
• pp.371-384
• /
• 2008

The purposes of this study were to investigate perspective teachers' conceptions of liquid-state and get implications for the direction of science curriculum or professional development. The instrument was composed of seven questions focusing on aspects of liquid-state phenomena. The results showed that the participants have various alternative concepts about liquid-state. The problem revealed in almost every question was their macroscopic explanations for the phenomena. In addition, it appeared that the participants seemed to understand phenomena in terminology level, but they didn't know basic reasons or fundamental concepts about the phenomena. It is required to change the curriculum or instructional methods in secondary school and teacher education programs to anchor the scientific concepts on molecular or microscopic level.

• 한국과학교육학회지
• /
• 제32권8호
• /
• pp.1345-1355
• /
• 2012

In this study, 15 evaluation questions about light were developed and presented to 30 middle school students, and then the theory of knowledge space was used to analyze the status of the middle school students' knowledge about light. Not only was the state of the students' knowledge about light intended to be measured by schematizing the knowledge hierarchy obtained; the data obtained were also intended to be used as basic materials to improve the teaching methods used. To achieve the purpose of this study, the evaluation results, the individual knowledge state, and the hierarchy of questions were analyzed. As a result, different knowledge structures were found in the individuals and groups, and it was determined that individuals and groups should be diagnosed differently. In addition, the implication that there is a connection between each question and the individual knowledge state was drawn.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.193-194
• /
• 2015

In this paper, the solid state pulsed power modulator developed in KERI, which is based on IGBT technologies are overviewed. During last ten years, several kinds of solid state modulators were developed in KERI such as IGBT stacks with step up transformer, full IGBT stack based marx generator, modified IGBT marx generator and high repetitive solid state modulator. Basic principle of the design is described and each pros and cons are compared. KERI's solid state pulsed power modulators has lot of advantages for industrial pulsed power application focused on everlasting life cycle and high repetitive, and shows superior arching protection ability.