• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.63-68
• /
• 1978

A boat seine has been used as a major fishing gear for catching anchovy (Engraulis japonica) in the southern coastal waters of Korea since the 1920s. Since the 1950s some improvement from the original seine has been made; powered boats equipped with net hauler has been used instead of rowing boats with hand-driven capstan, and the seining method has been changed into the trawling method. But even now, there are many problems to be solved in the view point of decreasing man power without decreasing catching efficiency. For the purpose, patti-net has been introduced from Japan and experimented on the commercial base since 1972, and it was known that the patti-net could be operated with man power as half as needed in the coventional net, but catching efficiency was not so desirable. Therefore, the study on the characteristics of it were required. The authors carried out a model experiment with a Qne-twentieth scale model net towed by a powered boat on the sea. The obtained results run as follows: 1. Hydrodynamic resistance of the model net can be explained as $R_p=69.6 V_{I.66}$ $R_h=37 v^2$ where $R_p$ and $R_b$ denote the resistance of the whole gear and the cod end in kg respectively, and v the towing speed in mlsec. 2. Performance of wing and cod end showed no deformation such as observed at the conventional net. 3. The ratio of opening at the entrance of bag net to that of cod end showed about 2: 1. Therefore, when we intend to enlarge the net to be able to operate in the deep fishing ground, the cod end should be enlarged in the same proportion and increased towing power is needed .. Then, it will be better to increase the ratio for increasing fishing efficiency without increasing towing power.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.927-938
• /
• 2014

A number of crime and disease relief situation show a clear increasing trend in domestic and overseas country. In particular, we desperately need a fast location information sharing with high accuracy for dealing with this situation efficiently. In this paper, we propose a DGPS framework and performance evaluation based on Web service enable increase location accuracy using low-cost GPS or AGPS. The framework consists of mobile station to realize the final service by receiving the correction values that are created in the base station closest to the current position from DGPS server, base station system to transmit the correct values to DPGS server by installing at base point and DGPS framework working at DGPS server. Our framework is fundamentally designed to respond based on XML to service request. In addition, for performance evaluation, we make use of 3 sites of Level 2 city base-station among the base stations being operated in Suncheon-si. Through performance evaluation, we show that our framework outperforms about 10%~15% in terms of error improvement rate, compared with the existing schemes. And we have the advantage that various services can be expanded owing to receiving the correction values through mobile device such as, smart phone, smart pad, net-book by using XML based Web services.

• 한국디지털정책학회:학술대회논문집
• /
• 2005.06a
• /
• pp.107-143
• /
• 2005

Mobile service that geography, position by development of space Information Technology and technology of communications, space are various to us now becoming limelight as point contents and infra information that customers do demand based on radio superhigh speed authentication net on highly information society by offer infringement problem about individual's privacy or information by political and scientific interest be injured. Purpose of this study grasps use factor of LBS application Mobile service, and it is that analyze actual proof through questionnaire to grasp whether some relation is with value and action determination that is felt of LBS application Mobile service. Distributed all question of 190 copies but disk floret inclination did valid data 171 that clear question and omission remove a lot of questions by type of study among questionnaire of collected 182 wealths. Analyzed factor analysis and authoritativeness to search validity and confidence of questionnaire and used single regression analysis and multiple regression analysis for hypothetical verification. According to verification result, Mobile service that apply position base service usefulness and system quality, adaptedness of Mobile service that apply position base service by leading person affecting in use, acted for connection healthy and felt value is important factor immediately. Usability and social effect, felt expense, privacy did not appear by leading person that keep in mind in this study. Is been related with step that Mobile service that apply position base service is placed. That is, as present childhood, a person who have experience that use service to look for friend is few and usability fairly in last in wide application boundary and this very important person was removed finally in model. This study has sense in terms of study systematically about LBS application service use leading person that is getting into the spotlight worldwide among Mobile service that is injured newly.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.173-193
• /
• 2016

Start-ups do not have enough resources such as financial capital and established customer base. Knowledge base of start-up team members is the crucial and unrivaled resource. This study tries to explicate the knowledge sharing process occurring in this knowledge base of start-up teams. Adopting the knowledge process view, detail process of knowledge sharing process model is constructed consisting of knowledge sharing speed, quality and quantity in a form of nomological net and empirically tested. In addition, preceding antecedents and consequential outcomes of this knowledge sharing is also posited as part of the research model : knowledge state of the team leading to team creativity and agility via the explicated knowledge sharing process model. Also, as this knowledge based view are triggered by the advance of IT in general, IT support is conceptualized as an antecedent and measures are operationalized. 230 data points were collected from start-up teams. Via data analysis using PLS, theoretical relationships from knowledge state, IT support, knowledge sharing process and knowledge consequences are found to be empirically supported except a few not supported. Most of all, team agility and team creativity are theoretically supported and empirically validated as critical outcome variables beyond performance measures. Though agility and creativity has been discussed as critical construct in start-up teams, it has not be much validated empirically. Also, interestingly, IT support are found to be significantly impacting the knowledge sharing process as expected. Academic contributions and implications for practice are discussed at the end with limitations and further research.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.374-385
• /
• 2022

In order to investigate the application of 3D base-seismic isolation system in nuclear power plants (NPPs), comprehensive analysis of constitution and design theory for 3-dimensional combined isolation bearing (3D-CIB) was presented and derived. Four different vertical stiffness of 3D-CIB was designed to isolate the nuclear island (NI) building. This paper aimed at investigating the isolation effectiveness of 3D-CIB through modal analysis and dynamic time-history analysis. Numerical results in terms of dynamic response of 3D-CIB, relative displacement response, acceleration and floor response spectra (FRS) of the superstructure were compared to validate the reliability of 3D-CIB in mitigating seismic response. The results showed that 3D-CIB can significantly attenuate the horizontal acceleration response, and a fair amount of the vertical acceleration response reduction of the upper structure was still observed. 3D-CIB plays a significant role in reducing the horizontal and vertical FRS, the vertical FRS basically do not vary with the floor height. The smaller the vertical stiffness of 3D-CIB is, the better the vertical isolation effectiveness is, whereas, it will increase the displacement and the rocking effect of superstructure. Although the advantage of 3D-CIB is that the vertical stiffness can be flexibly adjusted, it should be designed by properly accounting for the balance between the isolation effectiveness and displacement control including rocking effect. The results of this study can provide the technical basis and guidance for the application of 3D-CIB to engineering structure.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3641-3649
• /
• 2022

A simple solvothermal reaction was used to prepare a 3-aminopropyl-functionalized silica-gel-based adsorbent for adsorbing Pd(II) from the nitric acid solution. Scanning electron microscopy, fourier transform infrared spectroscopy, and thermogravimetry analysis were performed on the as-synthesized adsorbent to demonstrate the successful introduction of Schiff base groups. Batch experiments were used to investigate the effects of contact time, nitric acid concentration, solution temperature, and adsorption capacity. It is worth noting that the prepared adsorbent exhibited a higher affinity toward Pd(II) with the uptake approximately 100% even in a 2 M HNO₃ solution. At an equilibrium time of 5 h, the maximum adsorption capacity of Pd(II) was estimated to be 0.452 mmol/g. The adsorbed Pd(II) could be completely eluted by dissolving 0.2 M thiourea solution in 0.1 M HNO₃. Using a combination of particle-induced X-ray emission analysis and an X-ray photoelectron spectrometer, the adsorbed Pd was found to be uniformly distributed on the surface of the prepared adsorbent and the existing species were Pd(II) and zero-valent Pd(0). Due to the desirable performances, facile preparation method, and abundant raw material source, the prepared adsorbent demonstrated a high application potential in the recovery of Pd(II) from simulated high-level liquid waste treatment.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1209-1212
• /
• 2005

By using x86 processor for office environment, an improved Network Display System is implemented in this paper. The Network Display System is developed based on the x86 processor, and the system contains ethernet controller that can be used internet by stand alone. The Windows CE.NET is adopted as an operating system, and TFT-LCD monitor system is embedded..

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.54-68
• /
• 1990

Contingency response in a FMS system requires that the system be able to identify and evaluate a number of alternatives. This paper is outlined that DSS completes with a problem processor in corporating Timed Petri Nets model, and a data base system. DSS enables the FMS user to get the maximum benefit from a FMS. The structure of this DSS parallels the organizational activities involved in running the FMS. In designing a shop floor controller for FMS, interactions between the different real time, discrete event functions must be established. The specification of the machine tool and material handling system functions working as a concurrent and cooperative system is given in terms of Timed Petri Nets. In addition, the basic concepts and uses of Petri Nets are surveyed. The system to be studied is first modelled by a Timed Petri Nets and then procedure for evaluating the FMS system performance are presented. Numerical examples are studied to illustrate a session of the FMS used-DSS interaction.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.111-127
• /
• 2004

In this paper we describe an application of the lexical resource JurWordNet and of the Core Legal Ontology as a descriptive vocabulary for modeling legal domains. It can be viewed as the semantic component of a global standardisation framework for digital governments. A content description model provides a repository of structured knowledge aimed at supporting the semantic interoperability between sectors of Public Administration and the communication processes towards citizen. Specific conceptual models built from this base will act as a cognitive interface able to cope with specific digital government issues and to improve the interaction between citizen and Public Bodies. As a Case study, the representation of the click-on licences for re-using Public Sector Information is presented.