• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.472-477
• /
• 2009

This study was conducted to reclassify Bugog series based on the second edition of Soil Taxonomy : A Basic System of Soil Classification for Making and Interpreting Soil Surveys. Morphological properties of typifying pedon of Bugog series were investigated and physico-chemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon of Bugog series has strong brown (7.5YR 4/6) loam Ap horizon (0~22 cm), brown (7.5YR 4/4) clay loam BAt horizon (22~41 cm), strong brown (7.5YR 4/6) silty clay loam Bt1 horizon (41~59 cm), strong brown (7.5YR 4/6) silty clay loam Bt2 horizon (59~78 cm), brown (7.5YR 4/4) silty clay loam Btx1 horizon(78~90 cm), and brown (7.5YR 4/4) Btx2 horizon(90~160 cm). That occurs on swale foot slope in area of mainly granite gneiss, granite, and schist rock materials. The typifying pedon has an argillic horizon from a depth of 22 to more than 160 cm and a base saturation (sum of cations) of less than 35% at 75 cm below the upper boundary of the fragipan. That can be classified as Ultisol, not as Alfisol. The pedon has udic soil moisture regime, and can be classified as Udult. That has a fragipan with an upper boundary within 100 cm of the mineral soil surface, and keys out as Fragiudult. Also that meets the requirements of Typic Fragiudult. That has 18% to 35% clay at the particle-size control section, and has mesic soil temperature regime. Bugog series can be classified as fine silty, mixed, mesic family of Typic Fragiudults, not as fine loamy, mixed, mesic family of Typic Fragiudalfs.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.275-282
• /
• 1986

A series of studies on the properties of clayey terrace soils distributed at the inland (Yeongcheon) and coastal (Yeongjil) regions in Yeongnam district was carried out. On the base of the facts found and already reported about the macro morphological features as well as on pedological characters in micro scale, physicochemical properties, mineralogical characteristics etc., the present study dealt with soil genesis and tried to classify the soils for reasonable use and managements. 1. Although the both regions belonged to "Mesic" soil temperature regime and "red and yellow earths" areas of "Thornthwaite" pedo-climatic diagram, climatic indices as a soil forming factor indicate that the coastal Yeongil had milder than the inland Yeongcheon. 2. All the terrace soils had developed soil profiles with an "Argrllic B". Upyeong soils in Yeongil region had "Argillans" even in the "II B horizons" that possibly be "Paleo-argillic". 3. The bisequum profiles of Bancheon in Yeongcheon and Upyeong in Yeongil revealed that they were developed on Late Mesozoic shale and on semiconsolidated Tertiary deposits respectively, therefore the overlying clayey terrace deposits were assumed to be originated from the Early Quaternary deposits, Diluvium. 4. To supplement the Soil Taxonomy of USDA, the terrace soils with different degrees of gleyzation were classified as follows; Deogpyeong and Hwadong soils which have less than 50cm of paddified gley horizons (redness less than 0.5) in the upper part of the profiles by artificial surface irrigation, tentatively classified into "Anthrepiaquic Hapludalfs" and the Geugrag soils that have more than 50cm of paddified gley horizons within 1.2m of the profiles, into "Anthr-aquic Ochraqualfs" while the Upyeong soils that had greyish mottles in subsoils by natural ground water remain as an "Aquic Hapludalfs" the same as present. The Bancheon soils with free mottles are into "Typic Hapludalfs" as used at present.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.670-678
• /
• 1994

The effects of amylase addition during extrusion cooking of rice on the physico-chemical properties of the extrudates were investigated in order to develop rice-based Korean style weaning food products. A laboratory-built single screw extruder was used, the enzymes used were Termamyl 120LS(amylase from Bacillus licheniformis, NOVO Co.), BAN 240L(amylase from Bacillus amylolichuefaciens, NOVO Co.) and malt powder. By the addition of enzymes, the water soluble index of the extrudates increased by 3 times compared to that of the extrudates without enzyme and the concentration of reducing sugar in the extrudates increased drastically at 28 feed moisture. The gel permeation chromatographic pattern showed that the large molecular starch fractions diminished by the addition of enzyme during extrusion and the low molecular fraction increased. The residual enzyme activity in the extrudate were 27% for the most thermo-resistance enzyme by treating at $140^{\circ}C$ in the metering section of the extruder. The sediment volume of the extrudate dispersion increased as the metering section temperature increased to $140^{\circ}C$ . By the addition of enzymes the viscosity of extrudate dispersion was redused $1/4{\sim}1/200$ of that of the extrudates without enzyme. It allowed to use 1.8 times of solid material to the weaning food formulation to attain the same level of consistency as the commercial products. It proves that the addition of amylase during rice extrusion is effective to increase the energy density of weaning food by starch degradation, which results in the increases of water solubility, reducing sugar content, dispersibility and fluidability.

• Korean Journal of Food Science and Technology
• /
• v.9 no.4
• /
• pp.255-263
• /
• 1977

Fermented squid, Loligo kobiensis, is widely used and occupies an important position in foods of this country. But no study on its taste compounds has been reported. This study was attempted to establish the basic data for evaluating taste compounds of fermented squid. The changes of such compounds during fermentation as free amino acids, nucleotides and their related compounds, TMAO, TMA and betaine were analysed. The sample was prepared with 20% salt content and fermented at a controlled temperature of $15{\pm}3^{\circ}C$. ADP, AMP and inosine tended to degrade rapidly while hypoxanthine increased more than four times as compared with raw sample at 91 day fermentation. In the free amino acid composition of fresh squid, abundant amino acids were proline, taurine, alanine, arginine, serine, glutamic acid, lysine, glycine, leucine and valine in order. Such amino acids like phenylalanine, methionine, tyrosine, isoleucine, and histidine were poor. In squid extract, proline and taurine were dominant holding 40.2% and 32.0% of total free amino acids respectively. The total free amino acid nitrogen in fresh squid was 33.6% of its extract nitrogen. The changes of free amino acid composition in the extract of squid during fermentation was not observed. In the extract of fermented product, abundant amino acids were proline, leucine, lysine, serine, arginine, alanine, valine, isoleucine, phenylalanine, methionine and glycine in order. Glutamic acid and histidine were poor and taurine and tyrosine were trace in content. The increase of total free amino acids during 63 day fermentation reached approximately wore than 1.8 times as compared with that of raw sample and than decreased slowly. The amount of betaine increased more than 1.2 times as compared with that of raw sample during 91 day fermentation. TMA increased while TMAO decreased during fermentation. The amount of TMAO nitrogen in 91 days fermented squid was 402.4mg% on moisture and salt free base. Betaine and TMAO known as sweet compounds were abundant in fermented squid. It is supposed that these compounds could also play a role as important taste compounds of fermented squid. It is concluded that the major taste compounds of fermented squid were amino acids like proline, leucine, serine, lysine, arginine, alanine and betaine. Other compounds such as valine, isoleucine and TMAO and hypoxanthine could also not be excluded as taste supporters in fermented squid.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.3
• /
• pp.135-152
• /
• 1975

The following informations are known from physical and chemical characteristics of orchard soils and nutritional diagnosis of orange leaves in Jeju. 1. Most orange orchards are located on terrace and cindercone thus soil moisture and microclimate of an orchard will greatly be affected by its topography. 2. Excessive well drainage, shallow soil depth, high content of gravels, low solid phase ratio and strong wind will give severe problem of soil moisture and wind errosion, thus the exte- nsion of soil depth is necessary for maintain nutrients, water and sufficient root volume. 3. Available soil water was significantly and positively correlated with organic matter content and clay content also contributes to available soil water. Vinyl mulching was greatly helpful for soil water conservation, wind errosion prevention, soil temperature increases during winter. 4. Abundant amphoteric amorphous allophane take a key role to fix phosphorus and also rations and thus it is the major factor to determine fertilizer efficiency. Lime and phosphorus must be applied in deeper soil layer. Release of filed phosphorus must be reevluated for availability. 5. Organic matter such as see weeds will greatly increase fertilizer efficiency and low fertilizer efficiency during spring may be related to available soil water. 6. Nitrogen was in superoptimum and Mg was enough but P and Ca were somewhat deficient according to leaf analysies while K was deficient according to fruit analysis. Phosphorus application increased sugar/acid ratio and potassium decreases rind percentage. 7. Manganese deficiency and toxicity appeared in a few places. Iron and boron were enough. Most places showed tendency of copper excess but some places showed copper deficiency. 8. Soiling after elimination of rock base, application of slow release fertilizer and abundant organic matter, vinyl mulching and drip irrigation will increase fertilizer efficiency greatly and fruit yield drastically.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.38-45
• /
• 2006

The thermal filter press dewatering(TFPD) technology to improve the dewaterability through increasing the inner vapor pressure, lowering the filtration viscosity and forming the porosity easily within cake as applying the heat at the sludge layer was developed in this study. The hot water with temperature of $95^{\circ}C$ and pressure of $1.2kg_f/cm^2$ was supplied to the heating plate equipped between filter plates with plate size of $470{\times}470mm$ and material of polypropylene. Sludge was dewaterd by supplying pressure of $5kg_f/cm^2$ and then by squeezing pressure of $15kg_f/cm^2$. As a results of estimating the characteristics of thermal dewatering to consider the initial water content and organic content to be influenced by a period of water shortage and rainwater, the dewatered cake water content was about 35 wt% and dewatering velocity was $4DSkg/m^2{\cdot}hr$ under the rainwater period, and the dewatered cake water content was about 50 wt% and dewatering velocity was $1.5DSkg/m^2{\cdot}hr$ in the case of sludge of water shortage season. These results was superior to the mechanical dewatering performance with water content of 70wt% and dewatering velocity of $0.9DSkg/m^2{\cdot}hr$. On the base of the results of TFPD, energy consumpted to deal with DS(Dry Solid) of 1kg was estimated by 300 kJ. It was analyzed that the energy consumption of TFPD was decreased about one third with comparison to the dryer system. Dewatering velocity of this technology was faster than the one of mechanical dewatering equipment and it was easier to product low water content cake. Therefore, this technology was recognized that dewaterability was predominant because of the fast of dewatering velocity and production of low water content cake, and also this known as economical efficiency was excellent because of low energy consumption in comparison with dryer.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.402-408
• /
• 2005

This investigation aimed at selecting the optimum catalyst and reaction conditions used in Fenton oxidation for landfill leachate treatment and was carried out at ambient temperature using a lab-scale experiment. The investigation led to the following results: 1) The optimum pH and dose for each iron catalyst were as follows: $Fe^{2+}\;=\;1,200\;mg/L$, $H_2O_2\;=\;1,200\;mg/L$, initial pH=3.0; $Fe^{3+}\;=\;1,200\;mg/L$, $H_2O_2\;=\;1,500\;mg/L$, initial pH=4.5; $Fe^0\;=\;1,200\;mg/L$, $H_2O_2\;=\;900\;mg/L$, initial pH=4.0, respectively. 2) The progress of Fenton oxidation could be instrumentally monitored by measuring redox potential evolution during leachate oxidation, thus, indicating the possibility of an on-line process monitoring. 3) A simple acid-base titration of Fenton-treated leachate proved that a relevant fraction of by- products formed during the treatment was made of acidic compounds in the optimum reaction condition for each catalyst used, thus demonstrating that the higher the extent of Fenton oxidation the greater was the amount of acids formed. 4) With the aim of selecting the optimum catalyst among $Fe^0$, $Fe^{2+}$ and $Fe^{3+}$, removal efficiency of each parameter in the optimum reaction conditions was considered. Although $Fe^{3+}$ was higher than other catalysts($Fe^0$, $Fe^{2+}$) in removal efficiency, $Fe^0$ was a optimum catalyst with a view of cost effectiveness.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.3
• /
• pp.131-140
• /
• 2015

To set up unicellular cyanobacterial strains with photo-biological $H_2$ production potential, live samples were repeatedly collected from 68 stations in the coastal zone of Korea for the four years since 2005. Among 77 cyanobacterial strains established six (KNU strains, CB-MAL002, 026, 031, 054, 055 and 058) were finally chosen as the excellent strains for $H_2$ production with $H_2$ accumulation over 0.15 mL $H_2\;mL^{-1}$ under general basic $H_2$ production conditions as well as positive $H_2$ production for more than 60 hr. To explore optimum procedures for higher $H_2$ production efficiency of the six cyanobacterial strains, the inter-strain differences in the growth rate under the gradients of water temperature and salinity were investigated. The maximum daily growth rates of the six strains ranged from 1.78 to 2.08, and all of them exhibited $N_2-fixation$ ability. Based on the similarity of the 16S rRNA sequences, all the test strains were quite close to Cyanothece sp. ATCC51142 (99%). The six strains, however, were grouped into separate clades from strain ATCC51142 in the molecular phylogeny diagram. Chlorophyll- a content was 3.4~7.8% of the total dried weight, and the phycoerythrin and phycocyanin contents were half of those in the Atlantic strain, Synechococcus sp. Miami BG03511. The growth of the six strains was significantly suppressed at temperatures above the optimal range, $30{\sim}35^{\circ}C$, to be nearly stopped at $40^{\circ}C$. The growth was not inhibited by high salinities of 30 psu salinity in all the strains while strain CB055 maintained its high growth rate at low salinities down to 15 psu. The euryhaline strains like CB055 might support massive biotechnological cultivation systems using natural basal seawater in temperate latitudes. base seawater. The biological and ecophysiological characteristics of the test strains may contribute to designing the optimal procedures for photo-biological $H_2$ production by unicellular cyanobacteria.

• Clean Technology
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2016

Steam reforming of tar produced from biomass gasification was conducted using several Ni-based catalysts. In labscale, the catalytic steam reforming of toluene which is a major component of biomass tar was studied. A fixed bed reactor was used at various temperatures of 400-800 ℃. Ru (0.6 wt%) and Mn or K (1 wt%) were applied as a promoter in Ni based catalysts. Generally, Ni/Ru-K/Al₂O₃ catalyst shows higher performance on steam reforming of toluene than Ni/Ru-Mn/Al₂O₃ catalyst. Used catalysts were analyzed by XRD and TGA to detect sintering and carbon deposition. Base on the lab-scale studies, the monolith and pellet type catalysts were tested in 1 ton/day scale biomass gasification system. Ni/Ru-K/Al₂O₃ monolith catalyst shows high tar reforming performance at high temperature. In addition, Ni/Ru-Mn/Al₂O₃ monolith catalyst was showed deactivation with operation time. Reforming performance of Ni/Ru-K/Al₂O₃ pellet catalyst which showed 66.7% tar conversion at 587 ℃ was compared to regenerated one. Overall, Ni/Ru-K/Al₂O₃ pellet catalyst shows higher stability and performance than other used catalysts.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.54-62
• /
• 2005

The present study was to determine how seasonal rainfall intensity influences nutrient dynamics, ionic contents, oxygen demands, and suspended solids in a lotic ecosystem. Largest seasonal variabilities in most parameters occurred during the two months of July to August and these were closely associated with large spate of rainfall. Dissolved oxygen (DO) had an inverse function of water temperature (r = = = - 0.986, p<0.001). Minimum pH values of<6.5 were observed in the late August when rainfall peaked in the study site, indicating an ionic dilution of stream water by precipitation. Electrical conductivity (EC) was greater during summer than any other seasons, so the overall conductivity values had direct correlation (r = 0.527, p<0.01) with precipitation. Ionic dilution, however, was evident 4 ${\sim}$ 5 days later in short or 1 ${\sim}$ 2 weeks in long after the intense rain, indicating a time-lag phenomenon of conductivity. Daily COD values varied from 0.8 mg $L^{-1}$ to 7.9 mg $L^{-1}$ and their seasonal pattern was similar (r = 0.548, p<0.001) to that of BOD. Total nitrogen (TN) varied little compared to total phosphorus (TP) and was minimum in the base flow of March. In contrast, major input of TP occurred during the period of summer monsoon and this pattern was similar to suspended solids, implying that TP is closely associated (r = 0.890, p<0.01) with suspended inorganic solids. Mass ratios of TN : TP were determined by TP (r= -0.509, p<0.01) rather than TN (r= -0.209, p<0.01). The N : P ratios indicated that phosphorus was a potential primary limiting nutrient for the stream productivity. Overall data suggest that rainfall intensity was considered as a primary key component regulating water chemistry in the stream and maximum variation in water quality was attributed to the largest runoff spate during the summer monsoon.