• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.287-295
• /
• 1995

Molecular cloning and nucleotide sequencing were undertaken for the RNA genome of gp53 antigenic region in cytopathic Singer strain of bovine viral diarrhea virus. The cloned cDNA was 939 nucleotides in length having a base composition of 31.0% A, 19.6% C, 25.5% G and 24.0% T. The sequence was corresponded to approximately 77.8%(817 bases) of predicted gp53 region and 122 bases after 3'end of gp53 region in the Singer strain when compared with NADL strain of known sequence. A single open reading frame was found in the sequence of 2nd frame and was deduced as encoding 312 amino acids.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.143-145
• /
• 2007

The correlation between crystallization and deformation behavior in the supercooled liquid region (SLR) of a $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ bulk metallic glass (BMG) alloy is investigated by compression tests, differential scanning calorimetry (DSC), electron energy loss spectrometry (EELS) and high resolution transmission electron microscopy (HRTEM). In the SLR, This BMG alloy was strongly depended on the deformation temperature and the alloy exhibits important change in deformation behavior after a given time which is directly connected to the development of crystallization. Compressive stress impeded decomposition and consequently retarded forming of nano-crystal, which led to enlarge the homogeneous deformation region of the BMG alloy in SLR during compression test.

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.45-50
• /
• 2008

SM45C steel rods being used generally for power transmission shafts and machine components was selected and welded by Butt-GMAW(Gas Metal Arc Welding) method. An estimation of fatigue life was studied by constructing S-N curve. Fatigue strength of base metal zone showed higher values than one of weld zone in low cycles between $10^4$ and $10^6$cycles. However, significant decrease in fatigue strength of base metal was found around $10^6$cycles, which were almost same as one of heat affected zone. This decrease was attributed that initial residual stress of the steel rods distributed by drawing process was diminished by continually applied load, and resulted in softening of base metal. The fatigue limit of the weld zone was highest in the boundary between deposited metal zone and heat affected zone, and followed by in the order of deposited metal zone, base metal zone, and heat affected zone. Based on these results, it is revealed that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected within the region of the lowest fatigue limit of heat affected zone.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.49-58
• /
• 2006

One of the first decisions that a radio network designer must take is the location of base stations and the distance between them in order to give the best coverage to a region and, possibly, to reduce deployment costs. In this paper, the authors give an insight to this matter by presenting a possible solution to a real problem: Planning the base stations layout for a universal mobile telecommunications system (UMTS) in the city of Barcelona. At the basis of this problem, there is the interdependence between coverage and capacity in a wideband-code division multiple access (W-CDMA) system, which is a new element in the planning of BS layout for mobile communications. This aspect has been first treated with an analytical study of the cell coverage range for a specific environment and service. The achieved results have been checked with the help of snapshot simulations together with a geographical information system (GIS) tool incorporated in the simulator that allows to perform analysis and to visualize results in a useful way. By using the simulator, it is also possible to study a more complex environment, that of a set of base stations providing multiple services to a large number of users.

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.313-316
• /
• 2003

The new epitaxial base cell as a high efficiency Si solar cell was fabricated and the effect of buried contact on the cell characteristics was investigated. In our experiments, the cell with buried contact showed the open circuit voltage of 0.62 V, the short circuit current of 40 mA, the fill factor of 0.7, and the efficiency of 10% under the incident light of AM-1 100 ㎽/$\textrm{cm}^2$. The insertion of buried contact in the epitaxial base structure brought the fabricated cell to the efficiency improvement of about 33%. The cell proposed in this paper has the structural superiority in the fabrication of high efficiency solar cell due to the carrier drift transport in the optical absorption region and the formation of back surface field by $p^{－}$ $p^{+}$ epitaxial base, and the reduction of emitter series resistance by n＋ buried contact.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.58-67
• /
• 2020

This study presents cyclic stress-strain and tensile test results at room temperature (RT) and 316℃ using cold-worked TP304 stainless steel base and weld metals. By comparing the cyclic hardening/softening behavior and failure cycle of cold-worked materials with those of irradiated austenitic stainless steels, the feasibility of simulating the irradiation effect on cyclic deformation and failure behaviors of TP304 stainless steel base and weld metals was investigated. It was found that, in the absence of strain-induced martensite trasformation, cold-working could properly simulate the change in cyclic hardening/softening behavior of TP304 stainless steel base and weld metals due to neutron irradiation. It was also recognized that cold-working could adequately simulate the reduction in failure cycles of TP304 stainless steel base and weld metals due to neutron irradition in the low-cycle fatigue region.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1764-1782
• /
• 2015

The purpose of this study is to investigate the understanding on the acid-base, acid rain and soil acidification of the elementary students. The participants in the current study were 280 6th graders from a elementary school in Gyeongnam Province. A questionnaire consists of four categories: understanding of (a) acid-base basic knowledge, (b) acid rain and (c) soil acidification. (d) In addition, students were asked to comment about the introduction of the acid rain experiment in the science textbook. The results are as follows; First, the results regarding acid-base basic knowledge. They know the classification, characteristics, and properties of acid-based solutions well but they don't know the acid-base neutralization, examples using properties and application in real life. Second, the results regarding acid rain, students know the definition and damage of acid rain but they don't know the causing substances, emission source and way of solution of acid rain for lack of knowledge. Third, the results regarding soil acidification was the well-known part for the students because they had continued learning about the soil from the lesson of acid rain. Also, we looked into the difference in gender and region about the understanding of acid-base, acid rain and soil acidification. According to the gender of the data about the understanding of acid-base, acid rain and soil acidification, the percentage of correct answers of female was higher than male's. Also we expected that urban students were higher than rural students on the understanding of acid-base, acid rain and soil acidification, but the understanding of urban students were similar to rural students. Fourth, we got positive answers and negative answers to the introduction of acid rain experiment. Most of the positive opinion were I want to know a lot acid rain experiment", followed by "It is possible to prevent the risk of the damage and It seems to having fun and new order. Most of the negative opinion were Acid rain experiment may be difficult and complicated followed by Just a theory in the book is enough, Acid rain experiment were boring and not fun, Acid rain experiment is dangerous, There are many to study in this order.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.25-35
• /
• 2011

Purpose: There are some advantages of the acrylic resin denture base ; appropriate strength, volume safety, simple processing apparatus, and low cost. But, it have a weakness for fracture by intense pressure or shock. However, the repairs for resin denture base are possible using various materials and techniques. There is a few studies in repairs for resin denture base, but not clinical researches. And there is no studies in absorbed saliva into the region of fracture and bond strength. This study is to observe re-bond strength of resin denture base after repairing under saliva absorption. Methods: The samples were made of heat curing resin and the rectangular parallelepiped specimens which were 50mm long, 10mm wide and 3mm high. The four different groups immersed in the artificial saliva for 2 weeks were prepared, 1) no repaired control samples, 2) immediately repaired samples, 3) repaired samples after 1 day dry, and 4) repaired samples after 3 days dry. The prepared samples were repaired by two different curing materials, self curing resin and heat curing resin method. Each groups composed of 10 specimens were experimented with the three point bending tests for bonding strength measuring Results: There were under condition absorbed in the artificial saliva and repaired by self curing resin method, repaired specimens after 1 day and 3 days dry groups had higher values of bonding strengths than control group, and bonding strengths of immediately repaired samples were similar to those of control samples (p<0.05). There were under condition immersed in the artificial saliva and repaired by heat curing resin method, immediately repaired samples showed similar values to bonding strengths of control groups, and repaired samples after 1 day and 3 days dry groups were lower than those of control group (p>0.05). Conclusion: In this study, the repairs for resin denture base were remarkably high values of bonding strengths than those of the past, and showed that have stable bonding strengths independent of saliva absorption of denture base, so present repairs for resin denture base can be performed, regardless of saliva conditions.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.148-151
• /
• 2004

This study was carried out to elucidate phylogenetic relationship of a yellow lump, Phellinus linteus by comparing the nuclear ribosomal intergenic spacer (IGS) I region with that of other genera of basidiomycetes retrieved from Genbank. IGS I region of Phellinus linteus was 730 bp long and sequence homology was conserved in the 5' region, in particular $1{\sim}280\;bp$, and decreased in the direction toward the 3' end. ITS region was widely studied in phylogenies related to basidiomycetes, but IGS region was not well understood yet. Our study indicated that IGS region can be a good tool in phylogenetic study of basidiomycetes.

• The Plant Pathology Journal
• /
• v.18 no.2
• /
• pp.98-101
• /
• 2002

Using phytoplasma universal primer pair Pl and P7, a fragment of about 1.8 kb nucleotide sequences of 16S rRNA gene and 16S-23S rRNA intergenic spacer region, and a portion of 23S rRNA gene of jujube witches'broom (JWB) and mulberry dwarf(MD) phytoplasmas were determined. The nucleotide sequences of JWB and MD were 1,850 bp and 1,831 bp long, respectively. The JWB phytoplasma sequence was aligned with the homologous sequence of MD phytoplasma. Twenty-eight base insertions and nine base deletions were found in the JWB phytoplasma sequence compared with that of MD phytoplasma. The similarity of the aligned sequences of JWB and MD was 84.8%. The near-complete 16S rRNA gene DNA sequences of JWB and MD were 1,529 bp and 1,530 bp in length, respectively, and revealed 89.0% homology. The 16S-23S rRNA intergenic spacer region DNA sequences were 263 bp and 243 bp in lengths respectively, while homology was only 70% and the conserved tRNA-lle gene of JWB and MD was located into the intergenic space region between 16S-23S rRNA gene. The nucleotide sequences were 77 bp long in both JWB and MD, and showed 97.4% sequence homology. Based on the phylogenetic analysis of the two phytoplasmas, the JWB phytoplasma belongs to the Elm yellow phytoplasma group (16S rV), whereas, the MD phytoplasma belongs to the Aster yellow group (16S rI).