• PNF and Movement
• /
• v.22 no.2
• /
• pp.181-189
• /
• 2024

Purpose: This study aimed to identify the effect of sling-applied plank exercise on the frequency, stiffness, and decrement of the rectus abdominis and longissimus muscles of the trunk according to the stability of the base of support. Methods: Thirty-three young adults volunteered to participate and were randomly assigned to one of three groups (SS, stable support; LES, lower extremity support; and ULES, upper and lower extremity support) according to the stability of the base of support. The muscular properties of the rectus abdominis and longissimus muscles during sling-assisted plank exercise according to the stability of the base of support. were measured by using Myoton PRO (Myoton AS, Tallinn, Estonia). Statistical analysis was performed MANOVA to determine the effect of sling-assisted plank exercise on the muscular properties of the rectus abdominis and longissimus muscles according to the stability of the base of support. Post hoc analysis was conducted using Bonferroni. The level of statistical significance was set at α = 0.05. Results: When comparing the muscular properties, the muscle frequency and stiffness of the left rectus abdominis of ULES were significantly decreased compared to that of SS (p < 0.05). In the measurement time, the muscle frequency and the muscle stiffness of the right rectus abdominis increased significantly after the intervention (p < 0.05). Conclusion: It was concluded that the more unstable the base of support (ULES), the higher the exercise strength, and the muscle frequency and stiffness decreased on the rectus abdominis at rest.

• PNF and Movement
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2016

Purpose: The purpose of the present study was to examine the effects of the area of the base of support formed by the human body on the maximal voluntary isometric contraction of upper limb muscles. Methods: The study was conducted with 20 normal adults. To identify changes in the base of support, the maximal voluntary isometric contraction of the biceps muscle was measured in a standing position, a sitting position, and a lying position for each subject. The sizes of the base of support formed in the standing, sitting, and lying positions were set to 1, 2, and 3 respectively, based on the sizes, to analyze the correlations. The maximal voluntary isometric contraction of the biceps muscle was measured using surface electromyograms (EMGs) (Noraxon DTS, Germany). Results: The results showed negative correlations in which, as the size of the base of support increased, the maximal voluntary isometric contraction of the biceps muscle decreased. Conclusion: Changes in the base of support of the body affect the maximal voluntary isometric contraction of the upper limbs. Therefore, when resistance exercises are applied for muscle strengthening, the positions should be changed considering the changes in muscle activity according to those positions. In addition, when EMGs are used to measure the maximal voluntary isometric contraction, the measurements should be conducted in the same positions, considering muscle activity that changes according to the base of support and positions, for data quantification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.35-42
• /
• 1992

The effectiveness of the support-isolation system for the equipment mounted on the primary structure is evaluated to reduce its responses under the earthquake load with considering the interaction between the primary structure and the internal equipment in this paper. A computer code (KBISAP) is developed to analyze the above system using the matrix condensation technique and constant average acceleration method. To evaluate the effectiveness of the support-isolation system, three systems are used in this study as follows: i) fixed-base structure with support-fixed equipment, ii) base-isolated structure with support-fixed equipment and iii) fixed-base structure with support-isolated equipment. The results of case study show that the acceleration of equipment with the support-isolation system is less than that of the support-fixed equipment in the base-isolated structure and significantly reduced the response compared with that of the support-fixed equipment in the fixed-base structure with the reduction factor of 8. The support-isolation system used in this study can reduce the response and also increase the safety margin of the important safety-related internal equipments.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.258-261
• /
• 2004

Numerical simulations are made to predict the axial force coefficients of a two-stage launch vehicle, and the results are compared with those by wind tunnel tests. It is found that the forebody axial force is not affected by whether the base of the body is modeled or not. Modeling the sting support used in wind tunnel tests reduced the base axial force compared to the results without it. The present calculation shows that the forebody axial forces are underestimated while the base axial forces are overestimated. The total axial force, therefore, compares with the experimental data with better accuracy by cancelling out the errors of opposite signs. Modeling of the sting support in numerical simulations is found to be necessary to get a better agreement with the experiments for both base and overall axial force coefficients.

• Journal of Korean Physical Therapy Science
• /
• v.1 no.1
• /
• pp.175-185
• /
• 1994

The purpose of this study was to evaluate and compare the biceps muscles activity at the different angle and direction of the base of support on sitting position in hemiplegic patients. The biceps muscles activity was measured at the $0^{\circ},\;10^{\circ}$ of posterior tilt, $10^{\circ}$ of anterior tilt, $10^{\circ}$ of affected side tilt and $10^{\circ}$ of sound side tilt of the base of support by EMG biofeedback (MYOMED 432. ENLAF NONIUS CO.) In this study, 24 out-patients were evaluated who were treated at Yonsei University Medical College Rhabilitation Hospital. This study was carried out from December 5. 1993 to March 30. 1994. In order to determine the statistical significance of result, the ANOVA, and t-test were applied at the 0.05 level of significance. The results were as follows : 1. The biceps muscles activity of the sound side was no significantly difference at the different angle and direction of the base of support on sitting position(p>0.05). 2. The biceps muscles activity of the affected side was significantly increased at the 100 of sound side tilt and $10^{\circ}$ of posterior tilt of the base of support on sitting position(p<0.05). 3. There was no significantly difference in the change of the biceps muscles activity of the affected side between the affected group and the intact group of propriocetive sense(p>0.05). 4. The change of the biceps muscles activity of the affected side was significantly higer in the group of G 2 spasticity compared to that of G 1, G 1+ spasticity(p<0.05). These results showed that the biceps muscles activity of affected side was significantly increased when the base of support was tilted toward the sounde side and posterior direction on sitting position. In order to prevent the increment of biceps muscle activity, the patients must avoid to sit toward sound side and posterior tilt.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.306-314
• /
• 2012

This paper proposes a new system to maximize efficiency of Air Base Protection Operations through the development of location identification software. The Wibro-based location identification system for Air Base Protection Force offers Blue Ground Force digitalized character message which is not exposed to enemy. Also, it is possible to automatically provide the location of Blue Ground Force to Air Base Ground Operations Center. The test result proves that this system is very helpful when Air Base Protection Force executes Air Base Protection Operations.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.147.2-147.2
• /
• 2005

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.64-67
• /
• 2004

Change detection using aerial and satellite images is one of the important research topics in photogrammetry and image interpretation. It is of particular importance especially in the fields of military, political and administrative affairs. When there is a need to detect changes in multi-temporal images, the most efficient methods for change detection and thresholds of change/no change area need to be chosen. Also, the images obtained from the various methods need to be analyzed. To do so, we need a system that can support our decision making process. Therefore, in this paper, we propose the Decision Support System for Change Detection. This system is composed of Data Base, Model Base and Graphic User Interface(GUI). Data base is a compilation of previous change detection results, and Model Base comprise of numerous operations. The data can be input and have the results of change detection analyzed by using GUI. In this paper, we will explain the entire operation of the system and demonstrate the level of its effectiveness.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• The Journal of Information Systems
• /
• v.7 no.1
• /
• pp.181-208
• /
• 1998

In many literatures of model management, various schemes for representing model base schema have proposed. Ultimately, the goal is to arrive at a set of mutually supportive and synergistic methodologies and tools for the modeling problem domain and model base design. This paper focus on how best to structure and represent conceptual model of problem domain and schema of model base. Semantic concepts and modeling constructs are valuable conceptual tools for understanding the structural relationships and constraints involved in an model management environment. To this end, we reviewed the model management literature, and analyzed the constructs of modeling tools of data model management graph-based approach. Although they have good tools but most of them are not enough for the representation of structural relationships and constraints. So we wanted more powerful tools which can represent diverse constructs in a decision support modeling and model base schema design. For the design of a model base, we developed object modeling framework which uses Object Modeling Techniques (OMT). In Object Modeling Framework, model base schema are classified into conceptual schema, logical schema, and physical schema. The conceptual schema represents the user's view of problem domain, and the logical schema represents a model formatted by a particular modeling language. The schema design, this paper proposes an extension of Object Model to overcome some of the limitations exhibited by the OMT. The proposed tool, Extended Object Model(EOM) have diverse constructs for the representation of decision support problem domain and conceptual model base schema.