• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.364-370
• /
• 2005

The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.486-489
• /
• 2004

The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.96-106
• /
• 2018

The government adopted activation policy of real estate to overcome low economic growth rate. Real estate activation plan adopted by the government raised credit limit by lowering the regulation, and reduced real estate investment cost by reducing the base rate. Also, delayed transfer tax on multi-house owner to activate real estate investment and resolved purchase right resale. Relief of real estate regulate caused increase of housing sales and price increase, and the real estate market changed to overheating aspect such as premium upon completion of lot sale in a short time. Such market atmosphere greatly increased household debs as owners own houses based on 'financial debt' instead of their income. Since 2017, real estate policy was reinforced to reduce household debts and lending rate was raised due to rise of base rate, accordingly, burden of household debt is expected to increase. This research suggested a plan for the Financial Supervisory Service to efficiently manage the financial world by analyzing the cause and problem of household debs.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.265-270
• /
• 1994

The aquation and base hydrolysis of [Co(en)$_2$NH$_3$Cl]$^{2+}$ were studied by UV spectroscopic method in various SDS aqueous solution. The base hydrolysis of [Co(en)$_2$NH$_3$Cl]$^{2+}$ with the addition of 0, 0.05, 0.1 mol dm$^{-3}$ sodium chloride was studied. For the aquation of the complex, the rate constant in the micellar phase(kH$^M$) was a little larger than that in the aqueous phase(kH$^W$). With the increase of SDS concentration, the second order rate constant(kOH) for the base hydrolysis unchanged below the CMC and sharply decreased down to a limiting value after the CMC was reached. The effect of added NaCl on the rate behavior of the complexes in the micellar solution were investigated by using an ion-exchanged model.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.65-73
• /
• 2013

PURPOSES : As a research to develop a cement treated base course for an airport pavement which can enhance its drainage, this paper investigated the strength, infiltration performance and durability of the pervious concrete with respect to maximum coarse aggregate sizes and compaction methods. METHODS : This study measured compressive strength, infiltration rate, continuous porosity and freeze-thaw resistance of pervious concrete specimens, which were fabricated with five different compaction methods and different maximum aggregate sizes. In addition, in order to reduce the usage of Portland cement content and to enhance environment-friendliness, a portion of the cement was replaced with Ground Granulated Blast Furnace Slag (GGBS). RESULTS: Compressive strength requirement, 5 MPa at 7 days, was met for all applied compaction methods and aggregate sizes, except for the case of self-compaction. Infiltration rate became increased as the size of aggregate increased. The measured continuous porosities varied with the different compaction methods but the variation was not significant. When GGBS was incorporated, the strength requirement was successfully satisfied and the resistance to freezing-thawing was also superior to the required limit. CONCLUSIONS: The infiltration rate increased as the maximum size of aggregate increased but considering construct ability and supply of course aggregate, its size is recommended to be 25mm. With the suggested mix proportions, the developed pervious concrete is expected to successfully meet requirements for strength, drainage and durability for cement treated base or subbase course of an airport pavement.

• Korean Journal of Metals and Materials
• /
• v.47 no.7
• /
• pp.440-446
• /
• 2009

Co base superalloys have been widely used for the parts of gas turbine due to their excellent strength, thermal fatigue, oxidation resistance and weldability at high temperature. In this study, directional solidifications were carried out at various solidification rates, including $0.5{\sim}300{\mu}m/s$ in the Co base superalloy FSX-414. The cellular interface were formed at a low solidification rate, $1{\mu}m/s$, and the dendritic interface was found at higher solidification rates, $5{\sim}300{\mu}m/s$. As the spacing of dendrite structure decreased, the size and spacing of eutectics decreased. Dendrite arm spacing decreased with increasing solidification rates and temperature gradient. It was interesting to find the $M_{23}C_{6}$ eutectic microstructure formed between $\gamma$ dendrites. Composition analysis showed that Cr and W were segregated severely between the dendrites, which resulted in the formation of Cr-rich $M_{23}C_{6}$ and W-rich MC carbides.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.91-98
• /
• 2014

In this investigation, the effect of crack orientation on spatial randomness of fatigue crack growth rate (FCGR) in friction stir welded (FSWed) 7075-T651 aluminum alloy joints has been statistically analyzed by Weibull distribution. The fatigue crack growth tests are conducted under three different constant stress intensity factor range (SIFR) control at room temperature with R = 0.1 and frequency 10Hz on compact tension (CT) specimen machined at base metal (BM) and weld metal (WM). The experimental fatigue crack growth rate data were obtained for two types of specimens having LT and TL orientations. LT specimens both base metal and weld metal showed higher fatigue crack growth rate as compared to TL specimens. In the lower SIFR region, FCGR were found to be almost 3 times higher in higher SIFR region. The shape parameter of Weibull both LT and TL orientation for FCGR was increased with increasing SIFR, the scale parameter was also increased with increasing SIFR. The smallest value of the shape parameter was shown in weld metal specimens having LT orientation at lower SIFR region.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.306-310
• /
• 2003

Hydrolysis reactions of S-phenyl-S-vinyl-N-p-tosylsulfilimine (VSI) and its derivatives at various pH have been investigated kinetically. The hydrolysis reactions produced phenylvinylsulfoxide and p-toluene sulfonamide as the products. The reactions are first order and Hammett ρ values for pH 1.0, 6.0, and 11.0 are 0.82, 0.45, and 0.57, respectively. This reaction is not catalyzed by general base. The plot of k vs pH shows that there are three different regions of the rate constants $(k_t)$ in the profile.; At pH < 2 and pH > 10, the rate constants are directly proportional to the concentrations of hydronium and hydroxide ion catalyzed reactions, respectively. The rate constant remains nearly the same at 2 < pH < 10. On the bases of these results, the plausible hydrolysis mechanism and a rate equation have been proposed: At pH < 2.0, the reaction proceeds via the addition of water molecule to sulfur after protonation at the nitrogen atom of the sulfilimine, whereas at pH > 10.0, the reaction proceeds by the addition of hydroxide ion to sulfur directly. In the range of pH 2.0-10.0, the addition of water to sulfur of sulfilimine appears to be the rate controlling step.

• The Korean Journal of Ecology
• /
• v.19 no.3
• /
• pp.231-240
• /
• 1996

The germination responses of Cassia mimosoides var. nomame seeds to temperature were examined under various conditions. The temperature range allowing germination was $20~40^{\circ}C$, and the linear relationship between the germination rate and temperature appeared to exist between $28~38^{\circ}C$ The total thermal time required for germination (10~80%) of C. mimosoides seeds ranged from 259 Kh (degree Kelvin$\times$hours) to 421 Kh and base temperature range was relatively constant, i.e., $23.39~26.68^{\circ}C$. In the increasing temperature (IT) regime, C. mimosoides seeds started to germinate at $16^{\circ}C$ and showed greater germination rate with increasing temperatures. The final germination rate was 64% at $36^{\circ}C$. On the other hand, in the decreasing temperature (DT) regime, the seeds began to germinate at $36^{\circ}C$, and the final germination rate was 52% at $20^{\circ}C$. An induced dormancy occurred at $16^{\circ}C$ in the DT regime.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.894-905
• /
• 1992

Dioxygen binding and homogeneous catalytic oxidation of hydrazobenzene were investigated by employing tetradentate Schiff base Cobalt(II) complexes such as Co(II)(SED)$(Py)_2$, Co(II)(SOPD)$(Py)_2$ and Co(II)(SND)$(Py)_2$ in saturated oxygen methanol solvent. The major product of hydrazobenzene ($H_2$AB) oxidation by catalysts of superoxo type [Co(III)(SED)(Py)$O_2$] and [Co(III)(SOPD)(Py)$O_2$] complexes are trans-azobenzene (t-AB) and rate constants k for oxidation reaction was 7.692 ${\times}$ $10^{-2}$ M/sec for [Co(III)(SED)(Py)$O_2$] and 5.076 ${\times}$ $10^{-2}$ M/sec for [Co(III)(SOPD)(Py)$O_2$]. But cis-azobenzene (c-AB) are obtained as a major product with ${\mu}$-peroxo type [Co(III)(SED)(Py)]$_2O_2$ catalyst, and rate constant k is 1.266 ${\times}$ $10^{-2}$ M/sec. The rate constants of oxidation reaction has been studied spectrophotometrically and the rate law established. A mechanism involving a intermediate activated complexes of catalyst, hydrazobenzene and oxygen has been proposed. $H_2$AB + Co(II)(Schiff base)$(Py)_2$ + $O_2$ ${\rightleftharpoons}_{MeOH}^K$ Co(III)(Schiff base)(Py)$O_2$${\cdot}$$H_2$AB + Py $\longrightarrow^k$ Co(II)(Schiff base)$(Py)_2$ + t-AB + $H_2O_2$(Scchiff base : SED and SOPD). $H_2$AB + 2Co(II)(SND)$(Py)_2$ + $O_2$ ${\rightleftharpoons}_{MeOH}^K$ [Co(III)(SND)(Py)]$_2O_2$${\cdot}$H_2$AB + 2Py ${\longrightarrow}^k$ (Co(II)(SND)$(Py)_2$ + c-AB + $H_2O_2$.