• Wind and Structures
• /
• 제7권3호
• /
• pp.203-214
• /
• 2004

This paper describes a method for developing a multi-degree-of freedom aero-elasto-plastic model of a base-isolated mid-rise building. The horizontal stiffness of isolators is modeled by several tension springs and the vertical support is performed by air pressure from a compressor. A lead damper and a steel damper are modeled by a U-shaped lead line and an aluminum line. With this model, the frequency ratio of torsional vibration to sway vibration, and plastic displacements of isolation materials can be changed easily when needed. The results of isolation material tests and free vibration tests show that this model provides the object performance. The peak displacement factors are about 4.5 regardless of wind speed in wind tunnel tests, but their gust response factor decreases with increment of wind speed.

• 대한추나의학회지
• /
• 제4권1호
• /
• pp.1-16
• /
• 2003

Objectives : The purpose of this study is researching for possibility that Moire topography be applied in group school screening for scoliosis known school health problem, and find acceptable method of early detection and early treatment for scoliosis Methods : The authors practiced Moire topography for primary & middle school 1,895 students[male 976, female 919] in Jeonju, korea in 2001. After we distinguished students who had abnormal finding in Moire topography and then re-examined spinal X-ray analysis. The data was analysed and evaluated statistically Results : According to this research, the abnormal finding in Moire topography was 53.7% (1,018 students), and students needed X-ray re-examination were 11.2% (213 students). Students diagnosed scoliosis by X-ray re-examination were 1.8%. According to statistical analysis, interval between vertical base line of pelvis and vertical base line of neck, gap between left distance and right distance to the vertical base line of pelvis and difference of contour lines have strong correlations with deformity degree of the body surface examined by Moire. Conclusions : Following this research, throughout early detection for scoliosis by Moire topography could reduce exposure from scoliosis radiographs, and could detect trunk asymmetry that couldn't be found existing X-ray examination, so it made selecting students under observation who have bad posture possible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.832-835
• /
• 2003

By using vacuum in-line driving and photoluminescence measuring method, we have observed the electrical and optical characteristics of the vacuum in-line sealing technology and analyzed the effect of the base vacuum level before filling the plasma gas. In the case of base vacuum level of $1{\times}10^{-3}$torr, the firing voltage of a 2-inch diagonal PDP panel was ranged from 310 to 345V depending on the plasma gas pressure of 200 to 300torr and luminous efficiency was ranged from 0.0227 to 0.0367 lm/W depending on the input voltage level of 330 to 225V. While, in the case of $1{\times}10^{-6}$, the characteristics were significantly improved. As a results, the firing voltage was ranged from 295 to 318V and luminous efficiency was from 0.0278 to 0.0451 lm/W.

• 한국의류학회지
• /
• 제26권8호
• /
• pp.1205-1215
• /
• 2002

The purpose of this study was to develop a production line using simulation method, which could improve work allocation, labor utility and productivity. Using simulation software AIM, a simulation model of functional sports wear assembly line was developed. A functional sports wear production factory were analysed to gather data necessary for this research. Factory layouts, production facilities, work time of each unit jobs were investigated. The data obtained were used as to build a base simulation model. Then, the base simulation model was verified using the obtained data, such as daily productivity. Using simulation method, low alternative production plans were suggested, which were to enhance productivity, and work efficiency and to reduce queue length and throughput time.

• 한국멀티미디어학회논문지
• /
• 제11권3호
• /
• pp.292-300
• /
• 2008

본 논문에서는 점진적인 화소 확장을 이용하여 영상 내에 존재하는 선분을 찾아내는 선분 추출 알고리즘을 제안한다. 본 논문에서 제안하는 선분 추출 방법에서는 기존의 선분 추출 방법인 허프 변환 기반 방법이나 선분의 그룹화 기반 방법과는 다른 접근법을 사용하였다. 영상이 입력되면 케니 테두리를 구하고, 테두리 화소 중 임의의 점을 선택하여 선분을 근사화 시킨 기본 직선을 만든 후, 선택된 점에서 임의의 반경 내에 있는 테두리 화소들을 선택한다. 직선과의 거리 오차와 기울기 각의 오차를 이용하여 선택된 화소에 가중치를 부여한다. 가중치 합 비교에 의해 선택된 화소들이 떨어져 있는지를 판별한 후, 가중치를 적용한 최소자승법에 의해 선 맞춤을 하여 선분을 구하게 된다. 제안된 알고리즘은 기존에 제안된 방법들과 결과를 비교하였으며, 계산 속도가 빠르면서 실제 존재하는 선분 추출이 가능하다는 것을 실험 결과를 통해 제시한다.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.1-10
• /
• 2007

This paper presents a design guidance of jig/fixture for flexible manufacturing system based on the verification of a base assembly motion instability. In flexible assembly system, the base assembly needs to be maintained in its assembled state without being taken apart. This requires stability in motion while the base assembly is handled or tilted. Therefore, the instability of the base assembly motion should be considered when determining the guide line of designing jig/fixture by evaluating a degree of the motion instability of the base assembly. To derive the instability, first we inference collision free assembly directions by extracting separable directions for the mating parts and calculate the separability which gives informations as to how the parts can be easily separated. Using these results, we determine the instability evaluated by summing all the modified separabilities of each component part within base assembly.

• 지적과 국토정보
• /
• 제48권1호
• /
• pp.139-151
• /
• 2018

국가기본도 구축은 전국을 두 권역으로 나누어 2년 주기로 항공사진에 의한 수정도화를 실시하는 정시업무와 현지조사와 준공도면 등에 의하여 주요 변화 지형지물을 2주 이내에 수정하는 수시수정업무로 이루어지며, 이 중 국가기본도 수시수정 지형자료추출 업무에 활용되는 부동산종합공부시스템(일사편리) 건물배치도의 경우 지역측지계 기반의 좌표체계로 세계측지계 기반 국가기본도에 활용할 경우 좌표변환오차가 위치오차에 포함되는 문제점을 가지고 있다. 또한 국가기본도는 수치지형도 건물 등록선인 건물 최외곽선(처마선)을 기준으로 등록하고 있고, 지적 및 건축 분야는 건물 중심선을 기준으로 등록하고 있어 건물 객체 관리기준이 불일치하고 있다. 이에 개선방법연구를 위해 부동산종합공부시스템(일사편리)건물배치도 위치에 직접 네트워크 RTK 측량을 실시하여 국가기본도 평면 도화위치 기준과 비교하여 문제점을 분석하였다. 이중 벽체와 처마의 차이가 있는 일반건축물의 경우 위치정보가 상이한 것 이외에 벽체와 처마의 차이만큼 건물 객체 비율에 차이가 있었다. 결론적으로 부동산종합공부시스템(일사편리) 건물배치도를 수시수정업무에 활용하기 위해서는 건물 중심선과 건물 최외곽선(처마선)의 이중레이어의 기초자료 제공이 필요하다 판단된다. 또한, 최신성 및 정확성을 동시에 확보 가능한 유기적인 지도갱신 프로세스에 대한 연구가 필요하다.

• 한국생활과학회지
• /
• 제16권5호
• /
• pp.969-977
• /
• 2007

The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.33.2-33.2
• /
• 2008

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.158-165
• /
• 2002

This study was to evaluate mechanical properties and toughness of the Al5083-O aluminum alloy welding zone according to the mixing shield gas ratio and heat input change. The GMA(Gas Metal Arc) welding of the base metal was carried out with four different mixing shield gas ratios(Ar100%+He0%, Ar67%+He33%, Ar50%+He50%, and Ar33%+He67%) and three different heat inputs(low, medium, and high). To investigate the Charpy absorbed energy of the weld zone, the specimens were divided base metal, weld metal, fusion line, and HAZ notched specimen according to the worked notch position. The different gas ratio and heat input had little effect upon the tensile strength. But Ar33%+He67% mixture had the greatest mechanical properties considering that the more He gas ratio concentrations, the higher yield strength and elongation. The maximum load and displacement of the weld metal notche specimen was so much low more than that of the base metal, but fusion line and HAZ notched specimens showed almost same regardless of the mixing shield gas ratio and heat input. The Charpy absorbed energy was lowest in weld metal notched specimen, and increased in the fusion line, and HAZ notche specimen in order. Ar33%+He67% mixture had the greatest toughness considering that the more He gas ratio, the higher absorption energy.