• Journal of Chest Surgery
• /
• v.6 no.2
• /
• pp.131-142
• /
• 1973

Studies of cardiopulmonary function and acid-base balance were performed on 29 dogs during control period, during oligemic hypotension and following return of blood to the animals. Intravenous morphine and local anesthesia were used. Fifteen of the 29 animals survived the complete experiment. The 14 animals that failed to survive the experimental period died between 15 to 90 minutes after the onset of bleeding. The results were as follows. 1. The heart rate increased after the onset of bleeding and failed to return to control level following reinfusion. Stroke volume decreased markedly after bleeding and failed to recover after return of blood from the reservoir. Cardiac output also decreased during oligemic hypotension and was maintained at this level after re-infusion. Total peripheral resistance decreased significantly immediately after bleeding, however it increased soon over the pre-bleeding level. Central venous pressure decreased after the onset of bleeding and remained at lower level for the rest of the experimental period. Arterial blood pressure, clown to 40-45 mmHg by acute hemorrhage, was elevated near to control level. Left ventricular work decreased tremendously during oligemic hypotension and failed to return to control level with the re-infusion of blood. Hematocrit value showed no significant decrease after bleeding and increased after re-infusion. Hemoglobin decreased after the onset of bleeding and recovered to control value after re-infusion. 2. The respiratory rate fell rapidly after bleeding from 124 to 29 and remained at this lower level for the remainder of the experiment. The tidal volume increased after bleeding and was maintained at this level for the remainder of the experiment. The respiratory minute volume showed no significant changes throughout the experimental period. Oxygen consumption fell lightly in all animals during oligemic hypotension and returned to normal levels following re-infusion. Arterial oxygen content and arterial oxygen saturation decreased following bleeding and the values returned to normal levels after the return of blood from the reservoir The arterio-venous oxygen difference increased after the onset of bleeding. It failed to return to normal values following re-infusion. Arterial $Pco_2$ decreased in all animals after the beginning of the bleeding. Partial pressure of $Co_2$ continued to fall until re-infusion, after which the values returned toward normal. Animals became acidotic. The pH fell to lower level following bleeding. Lactic acid and lactate: pyruvate ratio also increased during same period. Arterial pH and lactic acid failed to return to control value and lactate: pyruvate ratio increased more after re-infusion. Sodium bicarbonate decreased after bleeding and returned to control value following re-infusion.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.432-440
• /
• 2017

Compound specific isotope analysis of amino acids (CSIA-AAs) is being highlighted as an alternative approach for overcoming some restrictions in application of stable isotope analysis of bulk tissue (SIA) for trophic position (TP) estimation. However, this approach has rarely been applied in Korea. The present study determines TP of two Polychaeta (Nephtyidae and Glyceridae) and two fish species(Platycephalus indicus and Lophius litulon) collected from the Geum River estuary using nitrogen isotope ratio of amino acid and compared with the TP values estimated by SIA. The Polychaeta species, sampled in two sites, showed similar TP between SIA(2.7 and 3.1) and CSIA-AAs (2.6 and 3.1). However, for both fish species, TP values displayed a large difference between SIA (3.1 and 2.3) and CSIA-AAs (3.8 and 3.7). In this study TP values estimated by CSIA-AAs showed more similar to the previously reported gut content analysis of both fishes compared with the results of SIA. Current study suggests the applicability of nitrogen isotope ratio of amino acid to understand coastal ecosystem structure and trophic ecology.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1224-1231
• /
• 2006

Sucrose esters were synthesized by transesterification of sucrose with docosahexaenoic acid ethylester mixture (DHAEE). Potassium carbonate as a base catalyst was used in the presence of dimethylsulfoxide (DMSO) for the reactions. The reactions were performed with the different reaction times and molar ratios of substrates in the presence of surfactant in vacuum. Among the reaction conditions in this study, SE#4～7 showed the relatively high conversion rate (>96%) of DHAEE, leading to the high yield of sucrose esters. In addition, the product composition was changed from sucrose mono ester to di/tri/polyesters after the prolonged reaction time while the increased molar ratio of DHAEE also resulted in the composition changes of sucrose mono ester to the sucrose di/tri/polyesters. From the reaction (SE#7), conversion ratio was 98.5% in which 87.3% mono ester and 13.7% di/tri/polyester were found, resulting in the highest content of mono ester. Therefore, the sucrose ester containing various rates of mono and di/tri/polyesters, which effects on hydrophilic lipophilic balance (HLB) values, can be manipulatively synthesized using the reaction conditions reported in this study.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.251.2-251.2
• /
• 2010

Plant biomass has been proposed to be an alternative source for petroleum-based chemical compounds. Especially, phenolic chemical compounds can be obtained from lignin by chemical depolymerization processes because lignin consists of complex aromatic polymer such as trans-p-coumaryl, coniferyl and sinapyl alcohols, etc. Phenolic chemical compounds from lignin were usually produced in super critical water. However, we applied Near-critical water (NCW) system because NCW is known as a good solvent for lignin depolymerization. Organic matter like lignin can be solved in NCW system and the system has a unique acid-base property without conventional non-eco-friendly chemicals such as sulfuric acid and sodium hydroxide. In this work, we tried to optimize the NCW depolymerization system by adjusting the processing variables such as reaction time, temperature and pressure. Moreover, the amount of additional phenol was optimized by changing the molar ratio between water and phenol. Phenol was used as capping agent to prevent re-polymerization of active fragment such as formaldehyde. Alkali-lignin was used as a starting material and characterized by a Solid State 13C-NMR, FT-IR and EA (Elemental Analysis). GC-MS analysis confirmed that o-cresol, p-cresol, anisole and 4-hydroxyphathalic acid were the main product and they were quantitatively analyzed by HPLC.

• Advances in nano research
• /
• v.3 no.3
• /
• pp.169-176
• /
• 2015

Iron nanoparticles were made by using the modified coprecipitation technique. Usually the characteristics of synthesised particles depend upon the process parameters such as the ratio of the iron ions, the pH of the solution, the molar concentration of base used, type of reactants and temperature. A modified coprecipitation method was adopted in this study. A magnetic stirrer was used for mixing and the morphology and nature of particles were observed after synthesis. Nanoparticles were characterised through XRD. Obtained nanoparticles showed the formation of magnetite and maghemite under citric acid and oxalic acid as stabilisers respectively. The size of nanoparticle was greatly affected by the use of different types of stabilisers. Results show that citric acid greatly reduced the obtained particle size. Particle size as small as 13 nm was obtained in this study. The effects of different kinds of nucleating agents were also observed and two different types of nucleating agents were used i.e. potassium hydroxide (KOH) and copper chloride ($CuCl_2$). Results show that the use of nucleating agent in general pushes the growth phase of nanoparticles towards the end of coprecipitation reaction. The particles obtained after addition of nucleating agent were greater in size than particles obtained by not utilising any nucleating agent. These particles have found widespread use in medical sciences, energy conservation and electronic sensing technology.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.305-316
• /
• 2021

This study relates to the development of a new gel sheet mask that finally does not require support based on the reactivity and acid/base reaction experiments of Tamarindus indica seed gum (TG), ethanol, and polyols. When TG and a specific alcohol was mixed at a certain mixing ratio, a transparent gel is formed by reaction with each component, and thus a gel sheet mask without support might be obtained using the mixture. In order to maximize skin tone improvement, a carbonation system of acid and base reactions was introduced, and skin brightness and moisturizing power were evaluated using a spectrophotometer and a moisture measuring device. Through this study, it is expected that the gelation reaction by hydrogen bonding of TG, ethanol, and polyols can be developed into various types, and the gel sheet mask formulation introduced in this study is expected to help develop new products in the future.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.492-495
• /
• 1990

In succession to the previous paper(Korean J. Food Sci. and Techn., 21(2), 300, 1989), to investigate effect of salting process on physico-chemical properties of Korean radish cubes processed for kakdugi Ascorbic acid content, ${\alpha}-amylase$ activity, the penetration rate of glucose and red-pepper juice into the radish cubes, and aerobic microbial counts (bacteria, yeast and mold) were investigated during salting (packout ratio : 1:1g/ml) of radish-cube$(2{\times}2{\times}2cm)$ for kakdugi in the 15%(w/v) sodium chloride solution. For 6hr salting, ascorbic acid was reduced from 38.5mg% to 15.7 mg%, ${\alpha}-amylase$ activity was gradually increased until 5hr salting, and then deceased, Amount and rate of penetration of glucose and red-pepper juice(on base of redness) into the salted radish cube were both higher than raw cubes, and microbial counts were decreased, and mostly within one hour of salting.

• Clean Technology
• /
• v.19 no.3
• /
• pp.313-319
• /
• 2013

To produce biodiesel efficiently from fish oil containing 4% free fatty acid, esterification and trans-esterification were carried out with Vietnam catfish oil, which was kindly provided from GS-bio company. Heterogeneous solid acid catalysts such as Amberlyst-15 and Amberlyst BD-20 and sulfuric acid as homogeneous acid catalyst were used for the esterification of free fatty acids in the fish oil. Sulfuric acid showed the highest removal efficiency of free fatty acid and the shortest reaction time among three acid catalysts. The base catalysts for trans-esterification such as KOH, $NaOCH_3$ and NaOH were compared with each other and KOH was determined to be the best transesterification catalyst. Some solid material, which assumed to be saponified product from glycerol and biodiesel, were observed to form in the fish oil biodiesel when using $NaOCH_3$ and NaOH as the transesterification catalyst. The initial acid value of fish oil was proven to have a negative effect on biodiesel conversion. Of the three catalysts, KOH catalyst transesterification was shown to have high content of FAME and the optimal ratio of methanol/oil ratio was identified to be 9:1.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.76.1-76.1
• /
• 2011

석탄 가스화기 내에서 슬래그의 축적에 의한 막힘 현상 등으로 발생 가능한 조업중단을 예방하기 위해 탄의 종류에 따른 슬래그의 유동을 정확히 예측하는 것은 중요하다. 슬래그의 유동은 원료인 석탄의 회 성분 조성 그리고 가스화기 온도의 영향을 크게 받는다. 회가 용융된 형태인 슬래그의 융점 특성을 파악하여 슬래그 거동을 예측하기 위해서는 회를 조성하고 있는 주성분의 비율 뿐 아니라 소량의 성분들도 고려하여야 한다. 또한, 가스화기 조업 조건 중 수증기 분압이 슬래그 점도에 미치는 변화를 파악하여 공정 조건 확립 및 슬래그 계통 제어 로직에 반영 할 수 있다. 따라서, 대표적 열화학 평형계산 프로그램인 Factsage를 이용하여 슬래그 성분의 액상선 온도를 예측해보았다. 슬래그는 회 성분의 조성에 따라 결정 슬래그와 유리 슬래그로 나눌 수 있다. 본 연구에서는 결정 슬래그로는 Alaska Usibelli 탄을, 유리 슬래그로는 Kideco 탄의 조성을 사용하여, 가스화기 조업 조건 중 수증기의 분압에 따라 석탄 슬래그의 형성 및 점도 변화에 직접적인 영향을 미치는 결정 형성에 대한 상관관계를 예측해 보았다. 또한, 슬래그 유동에 영향을 줄 수 있는 요인으로써, 석탄의 품질을 결정하는 인자인 Base/Acid Ratio, Iron in Ash, Calcium in Ash, Silica-to-Alumina Ratio, Inron-to-Calcium Ratio를 달리 변화시켜가며 슬래그 점도 변화에 직접적인 영향을 미치는 결정 형성을 예측하였다. 이 예측결과는 향후 실험 데이터와 비교하여, 슬래그 처리 부분의 모니터링에 기초 자료로 활용될 뿐 아니라, 슬래그점도 측정 시스템의 운전 파라미터를 도출하는데 이용 가능할 것이다.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.41-47
• /
• 2021

An experimental device was developed for analysis of hydraulic oil characteristics with dielectric constant sensors. Online analysis is the most effective method of the three methods used for analyzing lubricant oils. This is because it can monitor the machine condition effectively using oil sensors in real time without requiring excellent analysis skill and eliminates human errors. Determining the oil quality usually requires complex laboratory equipment for measuring factors such as density, viscosity, base number, acid number, water content, additive, and wear debris. However, the electric constant is another indicator of oil quality that can be measured on-site. The electric constant is the ratio of the capacitance of a capacitor using that material as a dielectric, compared with a similar capacitor that has a vacuum as its dielectric. The electric constant affects the factors such as the base oil, additive, temperature, electric field frequency, water content, and contaminants. In this study, the tendency of the electric constant is investigated with a variation of temperature, water content, and dust weight. The experimental device can control working temperature and mix the contaminants with oil. A machine condition monitoring program developed to analyze hydraulic oil is described. This program provides graph and digital values with variation of time. Moreover, it includes an alarm system for when the oil condition is bad.