• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.387-392
• /
• 2003

This study is put a focus on the identification of sound characteristics according to the interior configuration of sound absorption material and air gap. Noise barrier is general consists of front perforated panel, air layer, sound absorption material, air gap and back plate. Noise barrier is required to the NRC value of 0.7. The absorbing performance of the noise barrier relies on the opening ratio of the perforated panel and the efficiency of the absorbing material. This study has observed the effect of opening ratio and hole size, the increase of sound absorbing performance by the configurations of sound absorption material and air gap. New designed noise barrier is achieved the acoustical performance of 0.87 the measurement in a reveration room.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1265-1268
• /
• 2009

In this paper, the effect of a flow barrier and bypass on the cooling performance for a straight fin heat sink is presented. Both side directions and upward direction of bypass are controlled using various ducts which have different width and heights. In addition, a flow barrier is used to control flow toward heat sink. Through experiments, the distance from leading edge of a heat sink to a flow barrier is varied for various bypasses under fixed volume flow rate condition. This study shows possibility to improve cooling performance when bypass and a flow barrier exist.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.223-233
• /
• 2016

Design of a vegetation type sound barrier was presented as a noise barrier on the boundary of neighborhood facilities including schools, and apartments. The suggested noise barrier is made of unit blocks that are to be formed by stacking over the wall structure containing the plant and soils in the blocks. The advantage of the vegetation noise barrier is to acquire not only sound absorptive effects of plants and soils, but also sound diffusive effect caused by the irregular surface of the barrier which could eventually mitigate the noise. First, the optimum size of the units to obtain the highest noise reduction was investigated using 1/10 scaled model experiment, and sound attenuation experiments were carried out using a 1/2 mock-up model which is 2 m high and 5 m long. Total 1,137 unit blocks were made of synthetic woods with the size of $10{\times}10{\times}9cm$. These unit blocks were installed on the both side of the 1/2 mock-up steel framed noise barrier. As a result, it was revealed that the block typed vegetation noise barrier has 7 dB higher insertion loss in comparison with the general plane noise barrier. Also, it was found that the appropriate size of unit blocks is $20{\times}20cm$ which has large effect of sound insertion loss.

• The Journal of Korean Medicine
• /
• v.30 no.1
• /
• pp.83-94
• /
• 2009

Background and Objectives: The skin barrier protects skin against a harmful environment. Its function includes an antimicrobial barrier as well as a physical barrier. Stress is harmful to the skin barrier and there are many studies on this, but there are few about the effect of stress during pregnancy on the skin barrier of offspring. The aim of this study was to investigate the effect of stress during pregnancy on the skin barrier of offspring by examination with the naked eye, cortisol, weight, TEWL and histologic tests. Materials and Methods: Male hairless mice ten weeks old were coupled with females for three days. After twelve days the females were divided into two groups. We stressed one group and not the other group. The offspring from the non-stressed (N group) and stressed (S group) grew up until four weeks. The S group was exposed to chronic mild stress using the chronic stress model protocol modified method of Wilner and Towell for a week. We made examinations with the naked eye, assessment of cortisol, weight, TEWL, and histologic test to contrast the S group with the N group. Statistical analysis was performed by using Mann-Whitney and Friedman test. Statistical significance was achieved if the probability was less than 5% (p<0.05). Results: 1. By making an examination with the naked eye, S group showed papules, creases and dryness on their skin, but N showed no change compared with normal skin. 2. There was no statistically significant difference between S group and N group in cortisol (p>0.05). 3. There was no statistically significant difference between S group and N group in weight. N group had less weight than S group (p<0.05). 4. There was no statistically significant difference between S group and N group in TEWL (p>0.05). 5. There was no statistically significant difference between S group and N group in TEWL recovery (p>0.05). 6. In TEWL and TEWL recovery, there was statistically significant difference by time between S group and N group (p<0.005). Histologically, S group showed a thicker epidermis and epidermal crest than N group. Conclusions: We found that stress during pregnancy has negative effects on the skin barrier of offspring. Though there were no statistically significant differences between S group and N group in TEWL recovery, we found evidence that the recovery of skin barrier function is interrupted by stress during pregnancy by examination with both the naked eye and histology.

• Journal of ILASS-Korea
• /
• v.18 no.4
• /
• pp.209-214
• /
• 2013

The present study aims to determine the optimized shape for the maximum electric energy production of building integrated photovoltaic system (BIPV) noise barrier through numerical analysis. The shape of BIPV noise barrier is one of the important factors in determining angle difference between direction vector of the sun and normal vector of the sound barrier surface. This study simulated numerically the flow and thermal fields for different angles in the range from $90^{\circ}$ to $180^{\circ}$, and from the results, the amount of isolation onto noise barrier surface was estimated along the angle between ground and top side of noise barrier. The commercial CFD code (Fluent V. 13.0) was used for calculation. It was found that the maximum amount of insolation per unit area was 19.6 MJ for $105^{\circ}$ case during a day in summer and was estimated 12.4 MJ in $150^{\circ}$ case during a day in winter. The results of the summer and winter cases showed the different tendency and this result would be useful in determining the appropriate shape of noise barrier which can be mounted under various circumstances.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.45-48
• /
• 2006

In the response to the demand for electrical energy , much effort was given to develop and commercialize high temperature superconducting (HTS) power equipments has been made around the world. Especially, HTS transformer is one of the most promising devices . but the cryogenic insulation technology should be established during development Hence many types of dielectric tests should be carried out to understand the dielectric phenomena at cryogenic temperature and to gather various dielectric data. Among the many types dielectric tests . the characteristic of barrier effect were conducted using simulated electrode after analysing the insulating configuration of HTS transformer main winding. The influence of a barrier on the dielectric strength was measured according to the position of the harriet the number of the barrier and thickness or the barrier. It was shown that the effectiveness . namely the ratio of the breakdown voltage in presence of barrier to the voltage without barrier, is highest when the barrier is placed at the needle electrode side. On the contrary, in the case of having the barrier between the electrodes, the harrier was placed between the electrodes the characteristic was even improved slightly.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.13-17
• /
• 2011

Recently, interest in indoor air quality is increasing. Especially, radon radioactivity among the indoor air is a well-known risk factor for lung cancer because of ionizing radiation in the form of ${\alpha}$-particles. This study was carried out to investigate effect of black charcoal and activated carbon for reduction of radon radiation that emitted from building materials. Black charcoal and activated carbon were used as a barrier which was against the infiltration of radon. The source of radon was gypsum board. Two types of charcoal barrier were powder- and board-type with 5 mm, 10 mm thickness respectively. The method for this determination is evaluated radon concentration in chamber. The measurements were performed with radon detector, SARAD3120. Results of this study are as following: Black charcoal and activated carbon confirmed the highly efficient barrier. Radon concentration was reduced from 72% to 85% as compared the control chamber. Radon reduction capability, however, was no difference as barrier's types. Results obtained in ventilation condition, radon concentration shows 5.93 pCi/L on average in the closed condition and shows 2.69 pCi/L in the opened condition.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.286-286
• /
• 1996

In order to elucidate the mechanism of action of transdermal absorption-enhancing compounds, i.e., pyrrolidone derivatives (2-pyrrolidone, 1-methyl-2-pyrrolidone, 1-ethyl-2-pyrrolidone, 1,5-dimethyl-pyrrolidone and 5-methyl-2-pyrrolidone), multilamellar liposome was prepared from the simulated stratum corneum lipid and employed as a model system for the barrier function of the stratum corneum. The liposomal membrane of the stratum corneum lipid liposome (SCLL) behaves as an osmometer and has an excellent barrier function. In addition, its phase transition temperatures are similar to those of human stratum corneum intercellular lipid region. Therefore, SCLL seems to be a useful skin model. To estimate the barrier function of SCLL, the osmotic behavior of SCLL was measured in the presence of pyrrolidone derivatives and the effect on the phase transition temperature of SCLL was also investigated using differential calorimetry. Above a certain concentration (MLAC), enhances perturb the barrier function of the liposome. The relationship between MLACs and the partition coefficient of the pyrrolidone derivatives was observed; the greater the partition coefficients, the smaller the MLAC. This suggests that the more hydrophobic enhancers penetrate into the lipid layer more easily and reduce the barrier function of membrane more effectively. The results of differential scanning thermograms of the SCLL suggest that the pyrrolidone derivatives had incorporated into the lipid layer in the liposome and increased the fluidity of the lipid layer in the liposome. Such activity might have some correlation with the transdermal absorption-enhancing activity these compounds.

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.651-658
• /
• 2008

Estuary barrier is a hydraulic structure constructed to supply safely water as protecting chlorine penetration of sea water. However, the barrier brings about a problem which decreases original functions of estuary because hydraulic ecology was disrupted as obstructing natural water exchange between fresh water and sea water. It is important to supply Enough fresh water in the estuary ecosystem. But it is possible to reduce the problems brought from barrier throughout efficient water gate operation of estuary barrier. It was shown in this study that the environmental effect of estuary in Nakdong river was investigated according to the control of water level. Also, the basic information about the effective water gate operation was provided. The analysis results showed that the release rate of estuary was increased about 20% as changing the operational water levels. This helps supplying fresh water durably to the mixing zone. Also, CE-QUAL-W2 model was utilized to assess water quality. The values of BOD and COD were not changed in estuary area. From the result, it was analyzed the effect of water quality according to the water gate operation was not indicated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.688-693
• /
• 2001

A series of Fe/CeO$_2$/Fe$_{75}$Co$_{25}$ tunnel junctions (Magnetic Tunnel Junction, MTJ) having CeO$_2$ barrier layers from 30 to 90$\AA$ in thickness were prepared by ion beam sputtering (IBS) method. In order to compare the properties of MTJs, Fe/Al oxide/Fe-Co tunnel junctions were also prepared. Some junctions with a CeO$_2$ barrier layer showed the ferromagnetic tunneling effect and the highest MR ratio at room temperature was 5%. The electric resistance of junctions with a CeO$_2$ barrier layer was higher that that of junctions with an Al oxide barrier. On the other hand, The interface analysis of the Fe/CeO$_2$ bilayer was conducted by means of X-ray photoelectron spectroscopy (XPS). It was found that CeO$_2$ was decomposed to Ce and $O_2$ during sputtering, and Fe was oxidized with these decomposed $O_2$ molecules. The reduction of both electric resistance and MR ratio may be associated with the decomposed Ce in the barrier layer.r.r.