• Journal of Food Hygiene and Safety
• /
• v.10 no.3
• /
• pp.139-145
• /
• 1995

In order to develop a natural food preservative, the root bark of Morus alba was extracted with several solvents, and then antimicrobial activity was investigated. The optimum extracting condition for the antimicrobial substance from the sample, minimum inhibitory concentration (MIC) of the extracted substance against microorganisms were also examined. The antimicrobial activity of the ethanol extract form the sample was stronger than those of the extracts by the other solvents such as water, methanol. ethyl acetate and acetone. The optimum extracting condition for antimicrobial substance from the sample was shaking extraction twice for 5 hours at room temperature in case of 7 times of absolute ethanol added to the crushed root bark of Morus alba. The ethanol extract from the root bark of Morus alba had strong B. cereus, L. monocytogenes and S. aureus. Especially, Bacillus species was the most susceptible to the extracted substance. The ethanol extract showed antimicrobial activity against Gram negative bacteria(MIC, 160~1600 ug/ml) and yeasts(MIC, 1600 ug/ml) such as C. albicans and S. acidifaeciens. The extract also showed growth inhibition against molds such as A. niger, A. parasiticus, A versicolar and T. viride.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.134-141
• /
• 2021

This study was conducted to investigate the potential of the neutral extract (NE) prepared by treating P. radiata bark with aqueous NaHCO3 solution as a natural dyestuff. Silk and cotton fabrics were dyed at four different NE concentrations, 0.5%, 1.0%, 1.5%, and 2.0% o.w.b. (on the weight of bath). The fabric to liquid ratio of 1 : 50, dyeing temperature of 90℃, and dyeing time of 90 min were used as the fixed condition. The appropriate NE dyeing concentration of silk and cotton fabrics was 1.5% o.w.b. Colors of the dyed silk and cotton fabrics were brown and light brown, respectively. From colorfastness assessment, both dyed silk and cotton showed good washing and rubbing fastness, but poor light fastness. NE dyed fabrics exhibited excellent ammonia deodorization property and antibacterial activity against Staphylococcus aureus and Klebsiella pneumoniae. Therefore, NE of P. radiata bark could have the potential for use as a functional brown dyestuff.

• Membrane and Water Treatment
• /
• v.13 no.5
• /
• pp.209-217
• /
• 2022

In the present research, Ficus religiosa Bark (FRB) is used as an adsorbent for the removal of heavy metal Cr (VI) ions. This Ficus religiosa Bark was characterized by Scanning Electron Microscope, Fourier transform infrared Spectroscopy, Thermo Gravimetric Analyzer and the results showed that activated adsorbent have high adsorption capacity and withstand even in high temperature. Batch and Continuous experiments were conducted to determine the effect of various parameters such as pH, contact time, adsorbent dose and initial metal concentration. The biosorption followed pseudo first order kinetic model. The adsorption isotherms of Cr (VI) on Ficus religiosa fitted well with the Temkin model. In Batch study, maximum biosorption capacity of Cr (VI) was found to be 37.97 mg g^-1 (at optimal pH of 2, adsorbent dosage of 0.3 grams and concentration of Cr (VI) is100 mg L^-1). The Continuous mode of study shows that 97% of Cr (VI) ion removal at a flow rate of 15 ml min^-1. From the results, selected Ficus religiosa Bark has the higher adsorption capacity for the removal of Cr (VI) ions from wastewater.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.372-378
• /
• 2003

The volatile components of cinnamon bark were extracted by using different isolation methods, simultaneous distillation extraction (SDE) and solid phase microextraction (SPME). Then the volatile components were analyzed by gas chromatography(GC) and mass selective detector(MSD). 30 compounds were identified in cinnamon bark. In SPME technique, several factors influencing the equilibrium of the aroma compounds between sample and SPME fiber was taken into account, including the kind of SPME fiber, extraction temperature and extraction time. Four different SPME fibers were tested, namely polydimethylsiloxane (PDMS), poly acrylate(PA), divinyl- benzene-carboxen-polydimethylsiloxane (DVB/CAR/PDMS) and carbowax/divinylbenzene(CW/DVB). Among these SPME fiber, PDMS coating fiber showed the best results. The profile of volatile compounds of cinnamon bark at different extraction temperature and extraction time were investigated by 100$\mu\textrm{m}$ PDMS fiber.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.138-146
• /
• 2013

Chemical compositions and biological functions of brown colorants extracted from pine bark(Pinus densiflora) have been studied. Dyeing test using multifiber fabrics with extracted colorants were preliminary carried out. Dyeing conditions and fastness tests of selected fabrics have been also studied. The brown colorants were produced 1.5% concentrations by solvent extraction from milled pine bark using methanol. The colorants were extracted with 80% methanol as best choice by a criteria of solid quantity and dyeability on fabrics. The chemical compositions were identified as mixtures of taxifolin epicatechin and procyanidin by LC/MS analysis. The brown colorants could be dyed not only natural fibers such as cotton, silk and wool but also synthetic fiber as nylon and semi-synthetic fiber as viscose rayon. Maximum K/S values was shown at 400 nm according to different fiber with color appearance of redish brown. Optimum pH and temperature of dyeing conditions was 4 and above $80^{\circ}C$, respectively. The brown colorants had a strong antioxidant activity compared to Butylated hydroxyanisole as standard and weak antimicrobial activity against E. coli. compared to kanamycin. Washing, rubbing, perspiration, dry cleaning and light fastness for cotton, nylon and silk dyed with the brown colorants were carried out by KS K method. Most of color fastness such as washing, rubbing, perspiration, and dry cleaning were represented as 4-5 grade. However, light fastness was reported as 2-3 grade. From this studies, brown colorants produced pine bark have a high potentials for natural dyeing on fabrics with antioxidant activity.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.46-52
• /
• 1999

Alkaline sulfite-anthraquinone(AQ) cooking was examined for their effectiveness in delignification of pine (Pinus densiflora S. et Z.) bark. Better delignification was achieved with alkaline sulfite liquor compared to monosulfite liquor, but the degree of delignification was less than 90% indicating need for improvement in cooking method, Remarkable increase in the rate of cooking and delignification was obtained by the simple addition of AQ to the alkaline sulfite cooking, Selectivity of delignification was also improved by the addition of AQ, Consequently, 90% of delignification was achieved with the addition of 0.2% AQ to the alkaline sulfite cooking. The selectivity of delignification was slightly affected by cooking temperature and NaOH concentration during alkaline sulfite-AQ cooking of the bark. The selectivity of delignification was highly affected by the concentration of $Na_2SO_3$, and the optimum concentration of $Na_2SO_3$ for the high delignification was 30% as $Na_2O$.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.45-52
• /
• 2005

This research was performed to evaluate adsorption behavior of woody charcoals obtained from wood powder, fiber and bark of spruce (Abies sibirica Ledeb). The wood materials were carbonized at various temperatures for 1 hour using experimental rotary kiln without any inert gas. The adsorption capacity of iodine and toluene, specific surface area and removal efficiency of acetic acid and ammonia gas of those charcoals were measured. The higher was the temperature for carbonization, the lower yields of charcoals were. Ash content of bark charcoal was higher than that of wood powder charcoal or fiber charcoal. Elemental analysis of woody charcoal revealed that the content of carbon was gradually lincreased as carbonization temperature was higher. When carbonization temperature was higher, adsorption capacity of woody charcoals for iodine was much improved. Wood powder charcoal and fiber charcoal were more effective for iodine adsorption rather than bark charcoal. Capacity of toluene adsorption was the highest in the charcoal of $600^{\circ}C$. Charcoals produced at high temperature efficiently removed acetic acid gas, while charcoals carbonized at low temperature such as $400^{\circ}C$ were proper to remove ammonia gas. This difference may be explained that the acidity of charcoals depends on the carbonization temperature: charcoals of low temperature indicate acidic property, while those of high temperature turned to alkaline.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.69-76
• /
• 2008

To estimate removal ability of harmful gas by charcoal, we carbonized Red oak (Quercus mongolica Fischer) wood and Larch (Larix leptoepis) bark at $300^{\circ}C$, $600^{\circ}C$ and $900^{\circ}C$ for 1 hour. Gas removal ratios was increased with carbonization temperature but there is no difference between wood and bark charcoal. In the case of bad smell and VOC gas, woody charcoal including bark charcoal carbonized at $300^{\circ}C$ showed low removal ratio, less than 50%, whereas woody charcoals which was carbonized at more than $600^{\circ}C$ reached almost 100% removal ratio to bad smell gas such as trimethylamine, methymercaptan, hydrogen sulfide, and to VOC such as benzene, toluene, xylene in $5{\ell}$ tedler bag with each gas of 100 ppm. It was thought that because charcoals carbonized at high temperature, for example, $600^{\circ}C$ or $900^{\circ}C$ have enough specific surface area to adsorb gas of 100 ppm. Moreover these charcoals rapidly removed almost gas in 10 minutes. However, acetylene, $SO_2$ and $NO_2$, charcoals which was carbonized more than $600^{\circ}C$ and which showed high removal ratio had low gas removal ratio of 40% at even 4 hours adsorption. It was concluded that adsorptive ability of woody charcoal was mainly influenced with carbonizing temperature, so that different charcoals carbonized at different temperature brings different gas removal ratio because these charcoals have not only different physical factor such as specific surface area but different chemical characteristic such as functional group, expected.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.284-291
• /
• 2009

This study was conducted to characterize the enhanced antioxidant and anticancer activities of Berberis koreana bark following a low temperature and high pressure extraction process. The results indicate that the B. koreana bark extracted as described showed a 93% increase in DPPH radical scavenging activity. Inhibition activity of xanthine oxidase was highest by this extraction process. In addition the growth of human lung cancer cells (A549), human stomach cancer cells (AGS), human breast cancer cells (MCF-7) and human liver cancer cells (Hep3B) were inhibited by 70.8%, 86.2%, 84.3% and 62.5% respectively. These data indicate that this low temperature and high pressure extraction technique results in the efficient extraction of bioactive compounds from rigid plant materials. This process could also be combined with other techniques to improve extraction yields and identify new biologically active substances from relatively hard plants.

• Current Research on Agriculture and Life Sciences
• /
• v.11
• /
• pp.25-30
• /
• 1993

The buds of Hayward/Bruno tree were damaged from $-7^{\circ}C$ but serious damage was found on the buds treated at $-15^{\circ}C$ and $19^{\circ}C$. The bark tissue was more suceptible to low temperature than the bud. The trees were survived and bursted their at all on the top of the graft union and new shoots were formed from the rootstock of the tree. Yellowish area on the leaf surface was found, which is believed that as a result of low temperature. From these, the kiwifruit trees must be grafted with cold tolerant rootstocks will be clarified in future.