• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.230-234
• /
• 1999

Barium titanyl oxalates (BTO) has been homogeneously prepared by thermal decomposition of dimethyl oxalate (DMO) in hydrochloric solution containing $Ba^{2+}$ and $Ti^{4+}$. Particles of BTO settled on the bottom of the beaker were collected at the aging time of 120 min using hydroxy propyl cellulose (HPC) as a dispersant. The reaction temperature, the concentration ratio of $[DMO]_0/([Ba^{2+}]_0+[Ti^{4+}]_0)$ and the existence of HPC were found to influence on morphologies of BTO, chemical yields and characteristics of barium titanates formed from their precursors.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.38-42
• /
• 1993

Factor analysis was applied to study the thermal decomposition of barium titanyl oxalate (BTO) which is used as the precursor of barium titanate. BTO was synthesized in $H_2O$ solvent and calcined at various temperatures. The X-ray diffraction patterns were obtained to make the data matrix of peak intensity vs. 2${\theta}$. Abstract factor analysis and target transformation factor analysis were applied to this data matrix. It has been found that the synthesized BTO consists of the crystals of $BaC_2O_4{\cdot}0.5H_2O\;and\;BaC_2O_4{\cdot}2H_2O$ as well as the amorphous solid of TiO-oxalate. The results also indicate that the BTO was transformed via $BaCO_3\;to\;BaTiO_3\;and\;Ba_2TiO_4$ during the thermal decomposition.

• Analytical Science and Technology
• /
• v.10 no.3
• /
• pp.203-208
• /
• 1997

Barium titanyl oxalate(BTO) was precipatated by utilizing the thermal decomposition of dimethyl oxalate in acidic aqueous solution having $BaCl_2$ and $TiCl_4$. Particle morphology of BTO was influeneced by the various experimental factors. i.e.. the faster rate to nucleation with higher temperature and the higher ratio of [DMO]/[$Ba^{2+}+Ti^{4+}$] was found to correspond to the faster rate of transformation of particle size distribution from unimodal to broad unimodal through bimodal. The BT powder obtained by calcination at $900^{\circ}C$ in air consists of larger particles than BT generated by general coprecipitation method and shows tetragonal symmetry. The stirring during reaction was also found to have much effect upon characteristics of BTO and BT.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.382-386
• /
• 1999

Spherical particles of barium titanyl oxalate(BTO) were homogeneously precipitated by thermal decomposition of dimethyl oxalate in hydrochloric mixture solutions of water and ethanol. The experimental parameters such as composition of the mixture solvents. the eoncentration of hydrochloric acid and reaction temperature had the paramount effect on the size of panicles collected from the bottom of the reaction vessel at the aging time of 120 min and the composition of BTO. Stoichiometric BTO powders were obtained under certain conditions as relatively low alcohol content in the mixtures, high chloride concentration and high temperature, Monosized, submicrometer, but titanium excess particles were obtained under certain reverse conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.113-114
• /
• 2005

Sufficient removal rate with adequate selectivity to realize the pattern mask of tetra-ethyl ortho-silicate (TEOS) film for the vertical sidewall angle were obtained by chemical mechanical polishing (CMP) with commercial silica slurry as a function of pH variation. The changes of X-ray diffraction pattern and dielectric constant by CMP process were negligible.

• Korean Journal of Materials Research
• /
• v.12 no.7
• /
• pp.560-567
• /
• 2002

Titanium (Ti) is a bioinert material and has lower elastic coefficient and better strength/volume property than other metals. Ferroelectric materials show alignment of positive and negative charges by poling treatment. This study was purposed to develop a new implant system by combining the advantages of Ti and ferroelectric property of $BaTiO_3$ (BTO). It was performed with the assumption that the $Ca^{2+ }$ ions would be easily attracted on negatively charged surface and the attracted cation might behave as nuclei for bone-like crystal growth in biological solutions. A ferroelectric BTO thin film on Ti was fabricated and the effect of poling treatment on the improvement of calcium phosphate (Ca-P) formation in biological solutions was evaluated. After immersion in Eagle’s minimum essential media (MEM) solution, NaCl was formed on Ti, and Ca-P layer containing NaCl was formed on Ti-O. Weak and sparse Ca-P layers were formed on BTO, while thick, homogeneous, and dense Ca-P layer was formed on negatively polarized BTO (N-BTO), which was confirmed by FE-SEM and EDX. In summary, these results demonstrate that poling the ferroelectric BTO surface negatively is effective for the formation of Ca-P layer in MEM solution, and that N-BTO coating on Ti could be used as a possible alternative method for enhancing the osseointegration of the implants.

• Journal of Powder Materials
• /
• v.13 no.2 s.55
• /
• pp.129-137
• /
• 2006

In this study, high purity fine $BaTiO_3$ powders were prepared by SHS (Self-propagating High-temperature Synthesis). We would examinate the study of sintering properties and characteristics as a function of temperature with various additives (binder, sintering agent). In separately binder addition, the green and sintered density of specimen were increased as binder content increases. The increased porosity resulted in fine grain size due to the inhibition of grain boundary moving. The $Al_{2}O_{3},\;TiO_{2}$ and MgO playa role of increasing dielectric constants at room temperature. These values were decreased at curie temperature. In case of $SiO_2$, the Curie temperature was decreased. In this study, a high dielectric ceramic capacitor material with temperature stability was synthesized by using various additives.