• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.21-27
• /
• 1998

In this paper we apply routing algorithms in circuit switched networks to B-ISDN networks and investigate the performance. B-ISDN supports a wide range of services with hetrogeneous bandwidth requirements. We assume that the network supports D classes of traffic. It is modeled as a finite D dimensional Markov chain. A call is blocked on arrival if the required bandwidth is not available on the route. The shortest path routing, alternate routing and trunk reservation are considered for performance comparison. We also consider trunk reservation with restricted access control where the network reserves certain amount of bandwidths for one class of traffic that assumes a higher transmission priority. Through the method of successive iterations, we obtain the steady state equilibrium probabilities and call blocking probabilities for dynamic routing. The results can be used to design a B-ISDN network that improves network connection availability and efficiency while simultaneously reducing the network costs.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.437-438
• /
• 2008

This paper proposes a 8th-order single loop band-pass sigma-delta modulator that satisfies a wide bandwidth of 6MHz, which is required for a HDTV application. The proposed architecture is based on a simple analog structure that enlarges the noise shaping with a low OSR. In addition, a feedforward scheme is used to relax op-amp performance requirements. The proposed modulator has been simulated using the 0.18um 1.8v TSMC technology. The simulation results show that the bandwidth is 6MHz and SNQR is 70dB.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.69-81
• /
• 2002

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP-centric signaling and control architecture based on the generalized multi-protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross-connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS-based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user-network interface and network-network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to generalized MPLS signaling.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.188-192
• /
• 2013

Previous work proposed combining multipulse pulse position modulation (MPPM) with pulse amplitude modulation to form multipulse amplitude and position modulation (MPAPM), which is a hybrid modulation that results in an improvement in bandwidth efficiency but a degradation in power efficiency. In this paper, to achieve greater power efficiency and a better data rate, we propose multipulse dual amplitude-width modulation, based on MPAPM and pulse width modulation. The proposed scheme shows a remarkable improvement in data rate and a 1.5-dB improvement in power efficiency over MPAPM, while sustaining the bandwidth efficiency. After introducing symbol structure, we present the theoretical expressions of spectral efficiency, the power requirements, and the normalized data rate, as well as the results of comparing the proposed modulation to MPPM and MPAPM.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.123-132
• /
• 2004

The various challenges to realize a fixed wireless ATM network are discussed and some solutions for these challenges are presented. In this paper, the capacity allocation in wireless ATM, the wireless link impact on ATM traffic, and the optimum utilization of the wireless network resonrces for a line of sight (LOS) winless ATM link are studied. An adaptive MQAM modulator is introduced to provide a suitable solution to these issues. The modulator level is adjusted using a unique QoS metric in a wireless network. The metric, termed modified effective bandwidth, takes into account the bandwidth demand, QoS requirements, and outage conditions of the wireless ATM link. A performance study using VBR MPEG-l video traffic in a fixed wireless channel (Ricean channel) demonstrates the advantages of the proposed system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.135-138
• /
• 2004

This paper considers a ring loading problem on RPR(Resilient Packet Ring), where RPR is recommended by IEEE802.17 Resilient Packet Ring working group for data optimized networks without the requirements of provisioning circuits. RPR is well suitable for metropolitan area network with two counter-rotating rings that multiple stations share the bandwidth, where the data and its corresponding control traffic is transmitted to the two opposite directional ring, respectively. One of the major concerns on RPR is to provide fairness among traffic requirements. The paper discusses several fairness measures and analysis ring loading problems for the fairness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1071-1090
• /
• 2016

Most of scheduling methods in the Grid only consider one special attribute of the resource or one aspect of QoS (Quality of Service) of the job. In this paper, we focus on the problem that how to consider two aspects simultaneously. Based on the requirements of the jobs and the attributes of the resources, jobs are categorized into three kinds: CPU-overload, memory-overload, and bandwidth-overload jobs. One job may belong to different kinds according to different attributes. We schedule the jobs in different categories in different orders, and then propose a scheduling method-MTS (multiple attributes scheduling method) to schedule Grid resources. Based on the comparisons between our method, Min-min, ASJS (Adaptive Scoring Job Scheduling), and MRS (Multi-dimensional Scheduling) show: (1) MTS reduces the execution time more than 15% to other methods, (2) MTS improves the number of the finished jobs before the deadlines of the jobs, and (3) MTS enhances the file size of transmitted files (input files and output files) and improves the number of the instructions of the finished jobs.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.692-702
• /
• 2012

Supporting quality of service (QoS) guarantees for diverse multimedia services are the primary concerns for WiMAX (IEEE 802.16) networks. A scheduling scheme that satisfies QoS requirements has become more important for wireless communications. We propose a downlink scheduling scheme called adaptive priority-based downlink scheduling (APDS) for providing QoS guarantees in IEEE 802.16 networks. APDS comprises two major components: Priority assignment and resource allocation. Different service-type connections primarily depend on their QoS requirements to adjust priority assignments and dispatch bandwidth resources dynamically. We consider both starvation avoidance and resource management. Simulation results show that our APDS methodology outperforms the representative scheduling approaches in QoS satisfaction and maintains fairness in starvation prevention.

• Journal of the Korea Society for Simulation
• /
• v.7 no.1
• /
• pp.1-14
• /
• 1998

In this paper, we propose an efficient network communication scheme tailored to the network virtual reality(NVR) system. We first present the architecture and implementation of CVRAT (collaborative virtual reality authoring tool). The design goal of CVRAT is to provide consistent and scalable shared virtual environments. To achieve this goal, we classify the network messages according to their reliability and latency requirements. These conflicting requirements lead us to conceive a heterogeneous communication scheme which provides the unicast and three different multicast transport services; unreliable multicast, receiver-driven reliable multicast, fast reliable multicast. Each protocol has trade-offs in reliability, latency and bandwidth usage. The characteristics are analyzed by several experiments. Finally, applying this communication method to multi-participant battle-field tank simulation, we show the efficacy of proposed heterogeneous transport mechanism.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.832-834
• /
• 2007

This letter presents a reconfigurable ground-slotted patch antenna using a PIN diode connection in slots to achieve dual-frequency operation. Slots in the ground plane increase the electrical length and thereby reduce antenna size by 53%. By controlling PIN diode conduction, we achieved band hopping while still satisfying the bandwidth requirements for K-PCS and WiBro bands.