• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.140-145
• /
• 2007

The Lambda Networking is emerging to provide the high bandwidth stably for advanced applications such as a large file transfer in High Energy Physics and an Uncompressed HDTV streaming. The User Controlled LightPath(UCLP) is a software to facilitate the Lambda Networking. The UCLP is scalable as using Web Services to define and manage network resources. In this paper, we describe how we deployed the UCLP into KREONet2 and GLORIAD-KR. We also present that the original UCLP creates only a link-level APN due to a SONET technology. As employing a Virtual LAN (VLAN) of the layer2 technology in the UCLP, we can efficiently create a network-level APN.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2015

On modern operating systems such as Linux, virtual memory is a general way to provide a large address space to applications by using main memory and storage devices. Recently, storage devices have been improved in terms of latency and bandwidth, and it is expected that applications with large memory show high-performance if next-generation storage devices are considered. However, due to the overhead of virtual memory subsystem, the paging system can not exploit the performance of next-generation storage devices. In this study, we propose several optimization techniques to extend memory with next-generation storage devices. The techniques are to allocate block addresses of storage devices for write-back operations as well as to configure the system parameters, and we implement the techniques on Linux 3.14.3. Our evaluation through using multiple benchmarks shows that our system has 3 times (/24%) better performance on average than the baseline system in the micro(/macro)-benchmark.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.752-759
• /
• 2010

The low power consumption is the most important design factor for the In-Body communication system of WBAN. The conventional PSSK (Phase-Silence-Shift-keying) modulation technique can be regarded as an extension from PSK modulation. And this PSSK has better power efficiency than PSK modulation, and higher spectral efficiency than FSK modulation. PSSK modulation is to transmit two orthogonal symbols. The transmission power can be lowered because the symbol rate in signal period becomes half. BER performance is improved because transmission power is lower and the modulation symbol distance is widened. In addition, PSSK preserve the low-power and increase the data rate than FSK. In this paper, we analyzed existing PSSK and like to propose a new PSPM (Phase-Shift-Position-Modulation) modulation scheme. This PSPM is evaluated in terms of considered bandwidth efficiency and BER performance, compared with the PSSK. This PSPM modulation method transmits the information data by both PSK symbol data and symbol position data, so that we can significantly improve the power efficiency. New proposed PSPM method could be very useful for the In-body communication that requires the most power efficient system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2002-2019
• /
• 2017

RPL routing protocol for low-power and lossy networks is an Internet Engineering Task Force (IETF) recommended IPv6 based protocol for routing over Low power Lossy Networks (LLNs). RPL is proposed for networks with characteristics like small packet size, low bandwidth, low data rate, lossy wireless links and low power. RPL is a proactive routing protocol that creates a Directed Acyclic Graph (DAG) of the network topology. RPL is increasingly used for Internet of Things (IoT) which comprises of heterogeneous networks and applications. RPL proposes a single path routing strategy. The forwarding technique of RPL does not support multiple paths between source and destination. Multipath routing is an important strategy used in both sensor and ad-hoc network for performance enhancement. Multipath routing is also used to achieve multi-fold objectives including higher reliability, increase in throughput, fault tolerance, congestion mitigation and hole avoidance. In this paper, M-RPL (Multi-path extension of RPL) is proposed, which aims to provide temporary multiple paths during congestion over a single routing path. Congestion is primarily detected using buffer size and packet delivery ratio at forwarding nodes. Congestion is mitigated by creating partially disjoint multiple paths and by avoiding forwarding of packets through the congested node. Detailed simulation analysis of M-RPL against RPL in both grid and random topologies shows that M-RPL successfully mitigates congestion and it enhances overall network throughput.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.9
• /
• pp.1147-1154
• /
• 2001

In this paper, we make plans for facilities, the 8-VSB DTV transmission system, installed in the near future, based on presently NTSC TV operating it. First of all we estimate transmission power for analog NTSC, digital 8-VSB terrestrial broadcasting and the effective condition of optimal receiving power result from it. It's also to estimate optimal receiving condition by using Longley-Rice's Field Strength calculating method that is to guess a profile between transmitting station and many receiving points. The 8-VSB DTV Propagation aims to high-speed transmission rates of 19.39Mbps datum to enable HDTV(High Definition Television) at NTSC 6MHz bandwidth. First of all, an optimization of field strength between transmission station and receiver must deal with considerable. Because of these reasons, 8-VSB DTV transmission needs effective extension for NTSC TV service coverage. Finally we present the transmitting output that is expected in changing NTSC VHF to DTV UHF for maintaining the transmitting output of NTSC TV that is equal to 8-VSB DTV in service coverage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.830-838
• /
• 2003

In this paper, TX/RX dual operation microstrip single antenna for satellite communication is designed, analyzed, fabricated and measured. TX/RX frequency ranges are 14.0∼l4.5 GHz, 11.7∼12.75 GHz in respectively and vertical and horizontal polarizations are used for TX and RX. This antenna uses microstrip direct feeding for RX and aperture coupled strip-line feeding for TX and accommodates stacked elements for a high directivity and wide impedance bandwidth. In an analysis of single element, FDTD and MOM was compared and FDTD analysis was more accurate because of the consideration of finite structure and imperfect two ground planes. The proposed structure facilitates generally to an extension of two dimensional array and lower an unwanted radiation by strip-line feed in TX. TX/RX 8${\times}$4 array has a return loss below -10 dB, -14 dB in TX, RX respectively and a gain ranging from 19.1∼20.7 dB in TX, 21.2∼21.8 dB in RX which has a radiation efficiency of 43∼5l %, 52∼57 %.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.76-82
• /
• 2011

In this paper, a novel design for a dual-band negative group delay circuit (NGDC) is proposed. Composite right/left-handed (CRLH) ${\lambda}/4$ short stubs are employed as a dual-band resonator. A CRLH ${\lambda}/4$ short stub is composed of a typical transmission line element as the right-handed component and a high-pass lumped element section as the left-handed component. It is possible to simultaneously obtain open impedances at two separate frequencies by the combination of distinctive phase responses of the right/left-handed components. Negative group delay (NGD) can be obtained at two frequencies by using dual-band characteristics of the CRLH stub. In order to achieve a bandwidth extension, the proposed structure consists of a two-stage dual-band NGDC with different center frequencies connected in a cascade. According to the experiment performed, with wide-band code division multiple access (WCDMA) and worldwide interoperability for microwave access (WiMAX), NGDs of $-3.0{\pm}0.4$ ns and $-3.1{\pm}0.5$ ns are obtained at 2.12~2.16 GHz and 3.46~3.54 GHz, respectively.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.544-547
• /
• 2006

A time-domain modeling approach is used to study characteristics of a widely tunable coupled-ring reflector (CRR) laser diode(LD). The CRR consists of a bus waveguide and two coupled ring resonators coupled to the bus without resorting to distributed Bragg grating structure. The tuning range can be a few tens of nanometers with a side mode suppression ratio exceeding 35dB through the adjustment of currents into the phase control sections in the rings. The CRR laser diode has long effective cavity length compared to conventional laser diodes. Accordingly, a broad additional resonance peak in the amplitude modulation characteristics is observed between 20 to 30 GHz, implying the extension of amplitude modulation bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.520-526
• /
• 2012

Mostly lung diseases by smoking and air pollution is increasing social interest one of 6 kinds of modern diseases which is difficult functional recovery of damaged lung as dangerous diseases of life extension. Therefore, to reduce suffering from respiratory diseases is usually non-smoking, to do strengthen behavior of lung function. In this paper, we would like to propose method to do investigation by voice analysis technology to apply when lung associated ear acupuncture point stimulus to help strengthen actually lung function. From this, we would like to consider the voice change of before/after in smoking to analyze the impact on the human body to the lungs. Based on this experiment, we would like to investigate numerically quantity data actual improved lung function to analyze of voice character difference of before/after in lung associated ear acupuncture point stimulating.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.865-874
• /
• 2002

HTTP (HyperText Transfer Protocol) is a transfer protocol used by the World Wide Web distributed hypermedia system to retrieve the objects. Because HTTP is a connection oriented protocol, it uses TCP (Transmission control Protocol) as a transport layer. But it is known that HTTP interacts with TCP badly. it is discussed about factors affecting the performance or HTTP over TCP, the transaction time obtained by the per-transaction TCP connections for HTTP access and the TCP slow-start overheads, and the transaction time for T-TCP (Transaction TCP) which is one or methods improving the performance or HTTP over TCP. Average waiting time and average turnaround time are important parameters to satisfy QoS (Quality of Service) of end users. Formulas for calculating two parameters are derived. Such formulas can be used for the environment in which each TCP or T-TCP transaction time is same or different. Some experiments and computational experiences indicate that the proposed formulas are well acted, can be applied to the environment which the extension of bandwidth is necessary, and time characteristics of T-TCP are superior to that of TCP. Also, the load distribution method of web server based on the combination of bandwidths is discussed to reduce average waiting time and average turnaround time.