• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권7호
• /
• pp.3583-3598
• /
• 2019

In order to improve the reliability and repair efficiency of distributed storage systems, minimum bandwidth regenerating (MBR) codes based on cyclic variable fractional repetition (VFR) codes are constructed in this thesis, which can repair failed nodes accurately. Specifically, in order to consider the imbalance of data accessed by the users, cyclic VFR codes are constructed according to that data with different heat degrees are copied in different repetition degrees. Moreover, we divide the storage nodes into groups, and construct MBR codes based on cyclic VFR codes to improve the file download speed. Performance analysis and simulation results show that, the repair locality of a single node failure is always 2 when MBR codes based on cyclic VFR codes are adopted in distributed storage systems, which is obviously superior to the traditional MBR codes. Compared with RS codes and simple regenerating codes, the proposed MBR codes based on cyclic VFR codes have lower repair locality, repair complexity and bandwidth overhead, as well as higher repair efficiency. Moreover, relative to FR codes, the MBR codes based on cyclic VFR codes can be applicable to more storage systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권11호
• /
• pp.5335-5353
• /
• 2019

The definition of the bandwidth efficiency (BE) of cognitive cooperative network (CCN) is the ratio between a number of the licensed slot(s) or sub-channel(s) used by the unlicensed users to transmit a single data packet from the unlicensed transmitter to unlicensed destination, and from unlicensed relay(s) to unlicensed destination. This paper analyzes and improves the BE in the underlay CCN with a new reactive relay selection under interference and power constraints. In other words, this paper studies how unlicensed cooperative users use the licensed network slot(s) or sub-channel(s) efficiently. To this end, a reactive relay selection method named as Relay Automatic Repeat Request (RARQ) is proposed and utilized with a CCN under interference and power constraints. It is shown that the BE of CCN is higher than that of cooperative transmission (CT) due to the interference and power constraint. Furthermore, the BE of CCN is affected by the distance of the interference links which are between the unlicensed transmitter to the licensed destination and unlicensed relay to the licensed destination. In addition, the BE for multiple relays selection over a CCN under interference and power constraints is also analyzed and studied, and it is shown that the BE of CCN decreases as the number of relays increases.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.493-499
• /
• 2011

기존의 직교변조 (Orthogonal Modulation)는 그 효용성에 비해 대역폭 효율이 지나치게 떨어져 이를 개선하기 위한 다중부호 트랜스직교변조 (MCTO: Multi-Code Trans-Orthogonal Modulation)가 제안되었다. 그러나 MCTO 변조는 송신신호의 진폭이 일정하게 유지되지 않아 RF (Radio Frequency) 단에 포함되어 있는 전력 증폭기 (Power Amplifier)의 부담이 커지게 되는 문제점이 있다. 따라서 본 논문에서는 다중부호 신호를 정진폭으로 부호화하는 방식을 이용한 정진폭 다중부호 트랜스직교변조 (CAMCTO: Constant-Amplitude Multi-Code Trans-Orthogonal Modulation)를 제안한다. 또한 제안된 CAMCTO 변조의 성능을 실험을 통해 제시하고 기존의 직교변조 및 MCTO 변조와 비교한다. 실험 결과에 의하면 제안된 CAMCTO 변조는 기존의 직교변조에 비해 대역폭 효율은 매우 증가하며 MCTO 변조에 비해 RF의 부담을 매우 경감시킬 수 있음을 알 수 있다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.258-262
• /
• 2009

In this paper, we propose an effective memory reduction algorithm to reduce the amount of reference frame buffer and memory bandwidth in video encoder and decoder. In general video codecs, decoded previous frames should be stored and referred to reduce temporal redundancy. Recently, reference frames are recompressed for memory efficiency and bandwidth reduction between a main processor and external memory. However, these algorithms could hurt coding efficiency. Several algorithms have been proposed to reduce the amount of reference memory with minimum quality degradation. They still suffer from quality degradation with fixed-bit allocation. In this paper, we propose an adaptive block-based min-max quantization that considers local characteristics of image. In the proposed algorithm, basic process unit is $8{\times}8$ for memory alignment and apply an adaptive quantization to each $4{\times}4$ block for minimizing quality degradation. We found that the proposed algorithm could improve approximately 37.5% in coding efficiency, compared with an existing memory reduction algorithm, at the same memory reduction rate.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.427-430
• /
• 2005

A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.

• 한국전자파학회논문지
• /
• 제22권10호
• /
• pp.951-959
• /
• 2011

저전력 변조 방식은 근거리 통신 시스템에서 전력 효율을 높이기 위하여 필요한 요소이다. 본 논문은 저전력 변조를 위해 제안된 PSSK(Phase Silence Shift Keying), PSPM(Phase Shift Position Modulation), QAPM(Quadrature Amplitude Position Modulation) 방식들을 주파수 측에서의 mapping을 통하여 OFDM 전송을 하고 그 성능을 분석한다. PSSK, PSPM과 QAPM 변조 방식은 기존의 PSK, QAM 변조 방식에 비하여 대역 효율은 떨어지지만, 전송효율을 높인 변조 방식으로 PPM 방식을 이용하여 신호의 주기를 나누고, PSK 혹은 QAM 심볼을 배치한다. 이렇게 배치함으로써 심볼 주기 이외의 구간은 0을 배치할 수 있게 되고 그에 따라 전력 효율을 높이는 방식이다. PPM 방식을 이용한 변조 방식은 PSK보다 높은 전력 효율과 FSK보다 높은 대역 효율을 얻을 수 있으며, 전체적인 성능은 FSK와 PSK의 사이에 위치하게 된다. OFDM 전송 방식은 기존의 단일 반송파 전송 방식보다 대역 효율을 높일 수 있다. 이 논문에서는 PSSK와 PSPM, QAPM과 같은 저전력 변조 방식을 OFDM 방식에 적용하기 위한 주파수축에서의 부반송파 mapping 방식을 제안한다. 또한, 제안된 mapping을 통하여 전송하였을 때의 BER 성능과 단일 반송파 전송을 통한 BER 성능을 비교하며, 기존의 방식과의 PAPR 성능을 비교한다.

• 한국전자파학회논문지
• /
• 제21권12호
• /
• pp.1394-1400
• /
• 2010

이 논문은 저전력 통신을 위해 제안된 PSPM 변조의 다중 경로 채널에서 성능을 분석한다. PSPM(Phase Shift Position Modulation) 변조는 PSK를 기반으로 하여 PPM 변조를 결합한 방식이다. PSPM 변조 방식은 신호의 주기를 나누어 각각의 심볼을 배치하는 방식으로 기존의 PSK와 PSSK에 비해 대역 효율은 떨어지지만 전력 효율은 증가한다. 또한, 송신기의 전력 효율 이외에도 변조 레벨이 낮아짐으로써 심볼 간의 해밍거리가 증가하여 BER 성능이 증가하게 된다. PSPM 변조 방식은 기존의 FSK보다 높은 대역 효율을, PSK보다는 높은 전력 효율을 가지게 된다. 이러한 특성은 저전력을 필요로 하는 인체 통신 분야나 센서 네트워크 분야에서 유용하게 사용될 수 있으며, 기존에 제안된 FSK 방식보다 높은 전송량을 기대할 수 있다. 이 논문에서는 기존의 PSK, PSSK와 PSPM의 BER 성능과 throughput을 AWGN 채널과 다중 경로 채널에서 비교 분석한다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.19-27
• /
• 1991

본 연구에서는 그래프 이론에 기초한 이단계 번호 부여 방법에 목표밴드폭을 도입하여 계산시간이 짧으면서도 효율적으로 번호를 부여할 수 있는 방법을 제안하고 자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권12호
• /
• pp.4293-4304
• /
• 2014

In order to ensure the wireless connectivity and seamless service to mobile users, the next generation network system will be an integration of multiple wireless access networks. In a heterogeneous wireless access system, bandwidth allocation becomes crucial for load balancing to avoid network congestion and improve system utilization efficiency. In this article, we propose a new dynamic bandwidth allocation scheme for hierarchical wireless network systems. First, we derive a multi-objective decision criterion for each access point. Second, a bargaining strategy selection algorithm is developed for the dynamic bandwidth re-allocation. Based on the intervenient Stackelberg game model, the proposed scheme effectively formulates the competitive interaction situation between several access points. The system performance of proposed scheme is evaluated by using extensive simulations. With a simulation study, it is confirmed that the proposed scheme can achieve better performance than other existing schemes under widely diverse network environments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.