• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.83-90
• /
• 2011

In this paper, we present the design method for a low-pass type inverter, which can effectively suppress the spurious response associated with band-pass filters. The inverter has a length of ${\lambda}/4$ and employs not only a stepped-impedance configuration but also asymmetrical and bending structures in order to improve frequency selectivity and compactness. The inverter is applied as an impedance/admittance inverter to the ultra-wideband (UWB) band-pass filter. The UWB band-pass filter configuration is based on a stub band-pass filter consisting of quarter-wavelength impedance inverters and shunt short-circuited stubs ${\lambda}/4$ in length. The asymmetrical stepped-impedance low-pass type inverter improves not only the spurious responses, but also the return loss characteristics associated with a UWB band-pass filter, while a compact size is maintained. The UWB band-pass filter using the proposed inverters is fabricated and tested. The measured results show excellent attenuation characteristics at out-band frequencies, which exceed 18 dB up to 39 GHz. The insertion loss within the pass-band (from 3.1 to 10.6 GHz) is below 1.7 dB, the return loss is below 10 dB, and the group delay is below 1 ns.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.100-105
• /
• 2016

We have designed a three-channel output multiplexer (OMUX) using a band-pass filter and an ultra-wideband (UWB) antenna. The proposed band-pass filter is composed of an inner rectangular loop, an outer open stub, and a defected ground structure. The outer open stub can be used to control the pass band, and the inner rectangular loop can improve the insertion loss characteristics of the band-pass filter. The proposed band-pass filter, UWB antenna, and OMUX are fabricated and measured. The designed OMUX can cover the band group 1 (3,168-4,752 MHz) of WiX system. The measured radiation patterns are close to those of a conventional dipole antenna and the measured antenna gain varies from 1.8 dBi to 3 dBi over the operating frequency range.

• 대한전자공학회논문지TC
• /
• 제46권5호
• /
• pp.162-167
• /
• 2009

본 논문에서는 대역통과 여파기와 저역통과 여파기를 하나의 구조로 합성하여 크기 증가 없이 초광대역 특성을 가지는 여파기를 설계 및 구현하였다. 제안한 구조는 그 구조가 간단하다. 그리고 저역 통과 특성을 얻기 위하여 이미 잘 알려진 DGS(Defected Ground Structure) 구조를 이용하였다. 기존의 대역통과 여파기와 저역통과 여파기를 직접 연결하였을 때 보다 크기를 줄일 수 있었다. 측정결과 통과대역은 $2.1GHz{\sim}10.56GHz$이고 삽입손실은 최대 0.5dB, 반사손실은 최소 20dB, 군 지연은 $0.13ns{\sim}0.35ns$ 까지 최대 변화폭 0.23ns의 변화를 보인다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 춘계학술발표회논문집
• /
• pp.25-28
• /
• 1984

This paper describes the design of band-pass filter using the dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter as band-pass filter. Because dielectric resonator band~pass filter has a very high-Q, the bandwidth of this filter is very narrow. as a result of experiment, the dielectric resonator bandwidth of this filter is very narrow. As a result of experiment, the dielectric resonator band-pase filter has various modes central frequencies due to the mode change and good characteristric as a band-pass filter.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.933-941
• /
• 1996

In this study, the Tx(Transmitting) and Rx(Receiving) band pass filter for personal communication services was constructed and designed using .lambda./4 TEM mode dielectric resonators. Band pass filter was composed of ceramics resonators which has been developed using ($Zr_{0.65}$,$Sn_{0.35}$) $Ti_{1.04}$ $O_{4.04}$ ceramic and Unloaded-Q ( $Q_{o}$) of .lambda./4 TEM mode dielectric resonator with inner hole size 0.9mm and external size 3mm using silver electrode is 354.5 at 1.95GHz. For the band pass filter design and construction, the design theory and simulation results of band pass filter using J-inverter theory have been studied. The parameters which are evaluated by design theory are practically applied to the filter construction and the simulation results are in agreement with the measured results after fine tunnings.s.s.s.s.s.

• 대한전자공학회논문지TC
• /
• 제46권9호
• /
• pp.60-65
• /
• 2009

본 논문에서는 대역통과 여파기와 대역저지 여파기를 하나의 구조로 합성하여 크기 증가 없이 초광대역 특성을 가지면서 Wireless-LAN 대역을 저지하는 대역통과 여파기를 설계, 구현하였다. 대역저지 특성을 얻으면서도 여파기의 크기증가가 없어야 하기 때문에 전송선에 내장된 형태의 오픈 스터브를 사용하였다. 그리고 저역 통과 특성을 얻기 위하여 접지 면에 식각할 수 있는 DGS(Defected Ground Structure) 구조를 이용하였다. 기존의 대역통과 여파기와 저역통과 여파기를 직접 연결하였을 때 보다 크기를 줄일 수 있었다. 측정결과 통과대역은 $2.21GHz{\sim}10.92GHz$ 이고 삽입손실은 최대 0.7dB, 반사손실은 최소 17dB, 군 지연 변화폭은 0.22ns였으며 $5.3GHz{\sim}5.7GHz$의 저지대역을 형성하였다.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.288-291
• /
• 2012

We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.193-196
• /
• 2000

A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.176-179
• /
• 2005

The increasing demand for high density packaging technologies and the evolution to mixed digital and analogue devices has been the con-set of increasing research in thin film multi-layer technologies such as the passive components integration technology. In this paper, Cu and TaO thin film with RF sputtering was deposited for spiral inductor and MOM capacitor on the $SiO_2$/Si(100) substrate. MOM capacitor and spiral inductor were fabricated for L-C band pass filter by sputtering and lift-off. We are analyzed and designed thin films L-C passive components for band pass filter at 900 MHz and 1.8 GHz, important devices for mobile communication system. Based on the high-Q values of passive components, MOM capacitor and spiral inductors for L-C band pass filter, a low insertion loss of L-C passive components can be realized with a minimized chip area. The insertion loss was 3 dB for a 1.8 GHz filter, and 5 dB for a 900 MHz filter. This paper also discusses a analysis and practical design to thin-film L-C band pass filter.

• 대한전자공학회논문지TC
• /
• 제47권8호
• /
• pp.68-73
• /
• 2010

본 논문에서는 LC공진기를 이용하여 5.8GHz 대역에서 저지대역을 형성하는 초광대역 대역통과 여파기를 제안한다. 통과대역 이후 대역에서 높은 대역차단 특성을 얻고 여파기의 크기가 증가되는 것을 막기 위해 DGS(Defected Ground Structure) 구조를 사용하였다. 또한 LC공진기는 매우 작은 크기의 스터브와 라디얼 스터브로 설계되어 제안하는 여파기를 매우 작은 크기로 제작할 수 있다. 측정결과 전체 통과 대역은 2.21GHz~10.92GHz 이고 삽입손실은 최대 0.5dB, 반사손실은 최소 16dB, 군지연 변화폭은 0.29ns였으며 5.2GHz~6.2GHz 의 저지대역을 형성하였다.