• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.52-57
• /
• 2006

This research studies and analyzes the current trends and the frequency allocation bands for digital cordless phone(DCP) in other county. From these results, we propose 1.7GHz & 2.4GHz as a effective candidate frequency band for domestic DCP. A proposed 1.7GHz is expected to introduce DECT system of Europe. Therefore it is necessary to make an analysis of interference between 1.7GHz band and an adjacent IMT-2000 band. In this paper, we proposed the allocation of channel for 1.7GHz on the basis of the analysis of frequency interference between 1.7GHz band and an adjacent IMT-2000 band.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.939-951
• /
• 2019

A novel empirical mode decomposition strategy based on Fourier transform and band-pass filter techniques, contributing to efficient instantaneous vibration analyses, is developed in this study. Two key improvements are proposed. The first is associated with the adoption of a band-pass filter technique for intrinsic mode function sifting. The primary characteristic of decomposed components is that their bandwidths do not overlap in the frequency domain. The second improvement concerns an attempt to design narrowband constraints as the essential requirements for intrinsic mode function to make it physically meaningful. Because all decomposed components are generated with respect to their intrinsic narrow bandwidth and strict sifting from high to low frequencies successively, they are orthogonal to each other and are thus suitable for an instantaneous frequency analysis. The direct Hilbert spectrum is employed to illustrate the instantaneous time-frequency-energy distribution. Commendable agreement between the illustrations of the proposed direct Hilbert spectrum and the traditional Fourier spectrum was observed. This method provides robust identifications of vibration modes embedded in vibration processes, deemed to be an efficient means to obtain valuable instantaneous information.

• Journal of electromagnetic engineering and science
• /
• v.13 no.2
• /
• pp.93-103
• /
• 2013

This paper presented a novel approach for the design of a tunable dual-band bandpass filter (BPF) with independently tunable passband center frequencies and bandwidths. The newly proposed dual-band filter principally comprised two dual-mode single band filters using common input/output lines. Each single BPF was realized using a varactor-loaded transmission line resonator. To suppress the harmonics over a broad bandwidth, a defected ground structure was used at the input/output feeding lines. From the experimental results, it was found that the proposed filter exhibited the first passband center frequency tunable range from 1.48 to 1.8 GHz with a 3-dB fractional bandwidth (FBW) variation from 5.76% to 8.55%, while the second passband center's frequency tunable range was 2.40 to 2.88 GHz with a 3-dB FBW variation from 8.28% to 12.42%. The measured results of the proposed filters showed a rejection level of 19 dB up to more than 10 times the highest center frequency of the first passband.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.857-862
• /
• 2002

Compressor is a major noise source of air-conditioner. Especially, its low frequency band noise below 1000Hz is very important because it will not be attenuated by passing through the cover panel and heat exchanger in air-conditioner. The factors affecting the low frequency band noise are studied by geometric similarity along with several experiments, and the low frequency noise is closely related with the discharge holes of muffler as well as the cavity of lower shell. The low frequency band noise is significantly reduced by proposed designs.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.53-58
• /
• 2018

A novel X-band high speed frequency sweep signal generator based on a tunable optoelectronic oscillator (OEO) incorporating a frequency-swept laser is presented and the theoretical fundamentals of the design are explained. A prototype of the generator with tuning range from 8.8552 GHz to 10.3992 GHz and a fine step about 8 MHz is achieved. The generated radiofrequency signal with a single sideband (SSB) phase noise lower than -100 dBc/Hz@10KHz is experimentally demonstrated within the whole tunable range, without any narrow RF band-pass filters in the loop. And the tuning speed of the frequency sweep signal generator can reach to over 1 GHz/s benefiting from applying a novel dispersion compensation modular instead of several tens of kilometers of optical fiber delay line in the system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.380-384
• /
• 2001

The household reftigerator's noise which is closely related with resident environment can hardly be evaluated its sound quality using the Korean Standards. Radiation characteristics of compressor noise consist of tonal noise in low frequency range and, or narrow band noise in high frequency range. In this study, measuring method for detecting the abnormal and low-level noise in high frequency band is presented, and control method for its reduction is proposed. After installing wall which is similar to living condition, we determined a major concerning frequency band of noise. It can be found the directivity of high frequency noise radiated from compressor by using experiment and analysis. According to isolation of noise transfer path, remarkable noise reduction is achieved.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.269-272
• /
• 2003

A low phase noise frequency synthesizer at X-Band which employs the subharmonic injection locking was designed and tested. The frequency synthesizer consists of two oscillators - master and slave : A 1.75GHz master oscillator made of PLL synthesizer produces 6th harmonic at 10.5GHz, which excites the following 10.5GHz slave oscillator. The realized frequency synthesizer has a 4.5dBm of output power, and a phase noise of -108dBc/Hz at the 100kHz offset frequency.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.431-432
• /
• 2007

A general method for both reduced VCO gain ($K_{vco}$) and wide frequency band is to use the switched-capacitor bank LC VCO. However, $K_{vco}$ can fluctuate widely in the wide oscillation frequency range of the VCO. In this paper, a design of wide-band VCO with improved frequency-voltage gain performance is presented. Optimized multiple varacter switching technique is used for reducing its frequency-voltage gain variation.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.213-216
• /
• 1996

In this research we would like to develop an exercise ECG signal analysis algorithm using the wavelet transform, which is possible to analyze the time and the frequency simultaneously. Wavelet transform has an advantage of dividing the nonstationary signals into the high frequency and low frequency band successively. Thus, it can separates the unnecessary noises from the frequency band of QRS complex and then using the selected frequency band we could detect the QRS complex and ST segment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.682-685
• /
• 2005

In this research, how the evaluation of the spacial image influenced by the environmental friendly elements included in the visual information, and how the selection of the sound changed depending on the characteristics of spatial image by the 40 subjects were carried out. Vast tracts of green land and the waterfront were highly preferred and impressive than the other spaces. The green music, signal with water sound and bird chirping sound were highly scored. In the frequency characteristics of the factors, the first factor was artificial sound(high at the low frequency band), the second was natural sound(uniform at all frequency band) and the third was water sound(high at the middle and high frequency band over 500Hz). This shows that the proposal of the sound which has the frequency characteristics fit to the spacial image should be selected for the soundscape of the target space.