• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.2
• /
• pp.163-170
• /
• 2017

The International Convention for the Control and Management of Ships' Ballast Water and Sediments (hereafter "BWM Convention") will be enforced beginning on September 8, 2017. Even though the STCW Convention (International Convention on Standards of Training, Certification and Watchkeeping for Seafarers) and other international instruments require all ship personnel be qualified under certain competencies and standards, the International Maritime Organization (hereafter "IMO") has no unified requirements for training ship personnel on ballast water management. When the BWM Convention enters into force, all officers and crew on board ships should be intimately familiar with the guidelines and procedures outlined by the BWM Convention, regarding, among other topics, proper record keeping techniques and measures, the layout of the ballast control system, methods of ballast water exchange, and inspections by the port state control. To ensure that officers and crew members are adequately familiar, this paper proposes new competency requirements for ballast water management training and education to be added to the STCW Code. To support the introduction of these new competency requirements, this paper explores the evolution of the BWM Convention and examines how international regulations will be used to implement it.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.673-678
• /
• 2005

IMO adopted ' International Convention for The Control and Management of Ships' Ballast Water and Sediments ' on February 13th 2004. According to this convention, a ballast water treatment system should be installed in all ships obligatorily up to a standard date. When the system is installed, economic propriety should be considered. The economic propriety analysis examines the profit of a relevant project which can be presented by a equation, (Profit) = (income) - (expense) - (tax). However, the ballast water system is not for the profit during the life cycle but for the satisfaction of the regulation. Therefore, the expense should be minimum against the profit. This study presents the LCC(Life-Cycle Cost) analysis for economic evaluation of several ballast water system of foreign products.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.171-184
• /
• 2005

As recently, ' International convention for the control and management of ship's ballast water and sediments ' was adopted, it is necessary to accept the international convention in Korea. The systems of foreign countries for ship's ballast water control and management were investigated, and domestic environment-related laws were reviewed and compared regarding the discharge of industrial wastewater and ship's ballast water. Alternative measures of domestic legislation were suggested for acceptance of the international convention.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.83-96
• /
• 2005

As recently, 'International convention for the control and management of ship's ballast water and sediments' was adopted, it is necessary to accept the international convention in Korea The movements of foreign countries for ship's ballast water control and management were investigated, and domestic environment-related laws were reviewed and compared regarding the discharge of industrial wastewater and ship's ballast water. Alternative measures of domestic legislation were suggested for acceptance of the international convention.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.325-332
• /
• 2014

In installing ballast water treatment system, the cost of the system is high and many technical aspects are to be considered and also it takes significant time to retro-fitting on the existing ships. In addition, in the current circumstance which the Ballast Water Management Convention has not been entered into force, the 28th IMO Assembly adopted a resolution to mediate the implementation schedule of the treatment systems. In the mean time, California State and New York State have declared more stringent discharge requirements of ballast water and are planning to implement them earlier than the schedule of the Convention. In these circumstances, the implication in the difference between ballast water treatment system manufacturers and ship owners need to be considered. In this study, through the review on the considerations when installing the system onboard, stringent requirements of United States of America, and determent or mediated implementation schedules of Convention and California and New York States, the author would like to suggest the strategy of concerned parties for anticipated entrry into force of the Convention and implementation of the stringent requirements of United States of America.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.79-86
• /
• 2017

Ballast water filled into and discharged from the ballast tank of a ship has a negative impact on local marine environment due to various aquatic organisms contained therein. The IMO developed and adopted "The International Convention for the Control and Management of Ships Ballast Water and Sediments, 2004" with the purpose of protecting the marine environment from transfer of harmful aquatic organisms in ballast water carried by ships. The IMO BWM Convention was approved in September 2016 and ships must be equipped with ballast water management system after September 2017. Ships' ballast water treatment methods are divided into using active substances as electrolytic type, ozone type, chemical dosing type and using physical treatment type as filter type, ultraviolet type. It is also used with a combination of two methods. Electrolysis is superior in terms of cost and efficiency. In this study, basic principles, components, and land base test contents of electrolysis ballast water treatment system, a direct electrolyzed ballast water treatment system, were examined. Land base test was conducted with 300m3/h capacity device at the KIOST Geoje plant where the government test facility was installed. This test validated that the system meets IMO standards.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.72
• /
• pp.185-210
• /
• 2016

The climate change has become one of the most important global issues that require global responses. As one of the leading contributions to climate change, greenhouse gas emissions and Ballast Water Management have attracted growing attention from the international community. The International Maritime Organization (IMO) received its mandate to regulate International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004. The convention requires that every vessel must be equipped Ballast Water Management System (BWMS) in 2017. Based on this situation, this study aims to analyze the present state and data from the exports of BWMS(HS842121). The results show that as the most leading country in the field, Germany has the largest market share (14.33%), Revealed Comparative Advantage (RCA) index 1.76, and Trade Specialization Index (TSI) 0.636 in the world. The two other leading countries such as Denmark and Netherlands follows the ability of Germany. The Korean market share of HS842121 shows market share (5.98%) which is a bit bellow high compared to other countries. However the RCA index (1.85) presents the state of comparative advantage. In addition, Korea's TSI index (0.453) indicates that it is in the state of export specialization. The Korean BWMS and Shipbuilding industry maintain the state of export specialization. They are also in the state of import specialty. For Korea to raise its export competitiveness and to ensure shipbuilding competitiveness, it is necessary to intensify supporting systems and related policies.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.4
• /
• pp.214-220
• /
• 2008

The Ballast Water Management Convention provides that ballast water treatment systems which make use of active substances shall be approved from IMO according to the procedure developed by the IMO. The Convention described that active substance means a substance or organism, including a virus or a fungus, that has a general or specific action on or against harmful aquatic organisms and pathogens. The Marine Environment Protection Committee of IMO gave basic approval to 13 ballast water management systems and final approval to 4 systems until October 2008. This paper considered the matter of procedure and documents of the basic and final approval based on the "Procedure for approval of ballast water management systems that make use of Active Substances (G9)" and "The Methodology for information gathering and the conduct of work of the GESAMP-BWWG" and summarized the specifications of the treatment systems which was granted the basic or final approval from IMO and raised several points.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.284-288
• /
• 2009

The International Convention for the Control and Management of Ships Ballast Water & Sediments was adopted by consensus at a diplomatic conference of IMO at 2004. To prepare the Ballast Water Management Convention, fundamental technologies such as treatment system, type approval, risk assessment and various technical informations for formulation of the regulation for national strategy shall be developed. The information item of voyage and discharge of ship's ballast water are gathered by visiting vessel and agent at port. Using the 97 results by ships type characteristic analysis on the relation between loading/unloading and discharge/uptake of ballast water, the amounts of discharge/uptake of ballast water at each port and all of country in Korea are predicted. Hence, It is apparent that the uptake of ballast water is predicted to about 70 million ton in total of Busan, Incheon, Kwangyang and Ulsan ports at 2006 which is over 3 times than discharges.