• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.245-251
• /
• 2004

This paper is studied on the effect of TiAlN coated Ball End Mill and MQL(Minimum Quantity Lubrication) cutting condition on cutting characteristic of high hardness steels. KP4 steels[HRC32] and STD11[HRC60] heat treated steels were used as the workpiece and WC-Co ball end mill and single and multi layer TiAlN coated ball end mill were utilized in the cutting tests. MQL device was used to spray botanical oil coolant. Result showed that TiAlN coated ball end mill were increased the cutting length than WC-Co ball end mill in the cutting speed[$245{\sim}320m/min$] about $2.3{\sim}5.7$ times for KP4 steels and about $2.5{\sim}4.3$ times far STD11 heat treated steels. The multi layer TiAlN coated ball end mill is good for KP4 steels than single layer coated.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.47-52
• /
• 1997

Friction torques, electrical contact resistances and bearing temperatures were measured on high speed angular contact ball beatings for the spindle of machine tools. The test bearings ran with oil-air lubrication at the thrust loads from 320 N to 1920 N and at the rotational speed of up to 12000 rpm. Electrical contact resistances between balls and races were measured to evaluate the formation of the lubricant film in the contact area. The test results with sufficient lubrication showed that the variations of friction torques were sensitive to the thrust loads and the rotational speeds, and that the friction torques were higher than those with insufficient lubrication. With insufficient lubrication and high thrust loads, the collapse of the lubricant film was detected even at a high rotational speed. It was concluded that these high speed beatings to run in condition of fluid lubrication should require monitoring not only the temperature increase of the bearing but also the lubricant film formation in contact areas resulting from the change in the applied load and the lubricant amount.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.135-144
• /
• 1998

High speed machining is a key issue in die and mold manufacturing recently. Even though this technology has great potential of high productivity. tool wear accelerated by high cutting speed to the hardened materials is other barrier. In this research, we attempted to reduce tool wear by considering tool inclination angle between tool and workpiece. The boundary lines describing machined sculptured surfaces were represented by both of cutting envelop condition and the geometric relationship of successive tool paths. Chip cross section, and cutting length could be obtained from the calculated cutting edge and the rotational engagement angle. From the simulation results, machining inclination angle of tool of $15^\circ$ was good enough from the point of tool wear and cutting force, and this value was verified through the cutting experiment of high speed ball end milling.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.275-284
• /
• 2018

In the ball milling process of ceramic powders, according to economic considerations for industrial applications, it is very important to quickly determine the optimum process condition with the maximum grinding efficiency. However, it is still difficult to determine the optimum condition for a ball mill with respect to the various process parameters, such as the rotational speed and the milling time. Ball milling was carried out at the same starting conditions with given amounts of alumina powders, balls and water, and was conducted slower or faster or a critical rotational speed was just determined by observing the angular position of the slurry in a semi-translucent polyethylene laboratory container. With respect to the different rotational speeds, which were slower or faster than the critical rotational speed, the particle size distribution of the grained powders and the acoustic intensity caused by cascading of the balls led to various behaviors. From the results of the particle size distribution and the acoustic signal analysis in the ball milling, there was one rotational speed that made the finest milled powder with maximum acoustic intensity. As a result, there was a correlation between the ground particle size and the acoustic intensity, which yields the interpretation that it can be possible in-situ to determine the optimum condition of ball milling by acoustic signal without repeated measurement efforts.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.70-75
• /
• 1997

The lubrication characteristics of high-speed ball bearings at oil-starvation have been investigated empirically using the bearings employed in small industrial gas turbine engines. For the close structural simulation, experiments carried our with bearing mounting supports of real engines, such as bearing housings and oil nozzle assemblies with squeeze film dampers. Thus the results of tests can be applied to the design and the development of gas turbine engines. Testing was done by simulating the oil-starvation conditions in engines, such as stopping the oil-supply to the bearing during normal operating, starting without oil-supply at atmospheric temperature, and accelerating with oil-supply at atmospheric temperature. From this study, the relative comparison of the frictional resistance and the resistance due to the bearing cavity oil was demonstrated visually, and the resistance due to the bearing cavity oil was dominant in the resistance of bearing at high speed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.238-244
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end milts on the characteristics of high speed milling cutting process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semidry cutting using botanical oil coolant by the MQL(Minimum Quantity Lubricant) device were conducted. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that MQL spray cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than dry cutting did.

• 한국응용과학기술학회지
• /
• 제35권1호
• /
• pp.273-283
• /
• 2018

이 연구의 목적은 골프드라이버 샤프트의 가변성이 타구속도, 헤드스피드 및 비거리에 미치는 영향을 분석하고자 하였다. 이 연구에 참여한 피검자는 핸디캡이 0인 남자 프로골퍼 10명과 핸디캡이 18인 남자 아마추어 골퍼 10명으로 하였다. 클럽의 종류는 1번 드라이버로 한정하였고, 각기 다른 스팩의 24개 드라이버를 가지고 실시하였다. 종속변인으로는 타구속도, 비거리 및 헤드스피드로 하였다. 연구 결과 다음과 같은 결과를 얻었다. 첫째, CPM에 따라 유의한 차이가 나는 것으로 밝혀졌고, 사후검증 후 230< 이상일 때 타구속도, 비거리 및 헤드스피드에서 최적의 수행력을 보였다. 둘째, 샤프트길이에 따른 타구속도 및 비거리는 유의한 차이가 나는 것으로 나타났고, 사후검증 후 타구속도 및 헤드스피드는 46inch에서 비거리는 45inch에서 최적의 수행력을 보였다. 셋째, 샤프트 무게에 따른 변인 간 차이는 나지 않았고, 사후검증 후 샤프트 무게가 65g일 때 타구속도와 비거리에서 최적의 수행력을 보였고, 50g일 때 헤드스피드에서 최적을 보였다. 또한 프로와 아마추어 간에는 변인에서 유의한 차이가 나는 것으로 나타났다. 결론적으로 최적의 드라이버는 CPM이 230<, 샤프트길이 46inch, 샤프트 무게가 65g 샤프트 일 때 최고의 수행력을 발휘하는 것으로 판명되었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권3호
• /
• pp.3-7
• /
• 2006

For the purpose to improve and to automate designing of high-speed spindle units (SU's), we have developed the mathematical models and software to estimate SU performance characteristics, including the run-out of spindles running on ball bearings. In order to understand better the mechanics of high-speed SUs, the dynamic interaction of ball bearings and SU, and the influence of the bearing imperfections and SU's operational conditions on the run-out, we have carried out computer simulation and experimental studies. Through the study of SU's, we have found out that run-out of SU can vary drastically with variation of rpm. The influences of rotation speed and of accuracy parameters of bearings on the SU accuracy have the greatest importance. The influence of bearing preload has a secondary importance. Comparison of the results of these studies has demonstrated adequacy of the models and software developed to the real SU's.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.854-863
• /
• 2013

High-speed spindle systems typically employ angular contact ball bearings, which can resist both axial and radial loading, and exhibit high precision and durability. We investigated the effects of the arrangement of the angular contact ball bearings on the dynamics of high-speed spindle systems. The spindle dynamics were studied with a number of spindle-bearing models, and the location of the bearings was varied, along with the rotational speed and the preload. A finite element spindle model and a bearing model were used, and simulated data showed that the bearing arrangement significantly affected the spindle dynamics. Furthermore, the main effects were due to the cross coupling terms between the transverse and rotational motions of the ball bearings. The coupling stiffness terms were found to influence the spindle dynamics, depending on the mode shapes. An extensive discussion is provided on the effects of the bearing arrangement on the dynamics of the spindle.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.191-203
• /
• 2018

이 연구는 각각 크기와 재질이 다른 3 가지 종류의 분쇄 매체를 이용하여 회전속도와 밀링 시간의 따른 구리 (Cu) 분말의 형상변화의 과정에 미치는 영향을 관찰하고, 볼 움직임의 DEM시뮬레이션을 행하였다. 전동볼밀에서 볼 움직임의 3차원 시뮬레이션을 통해 분쇄 메커니즘을 규명하기 위하여 분쇄매체의 힘, 운동에너지, 매체 운동속도 등을 계산하였다. 시뮬레이션에서는 회전속도, 볼 재질, 운동속도, 마찰계수 등을 실제 실험조건과 동일하게 조건을 맞추어 투입되는 에너지의 변화량도 계산하였다. 주사전자현미경 결과를 살펴보면 볼 직경이 작을 때 입자형상이 불규칙한 형태에서 구형 형태로 변화하는 것을 알 수 있었다.