• 시멘트
• /
• 통권45호
• /
• pp.9-13
• /
• 1971

• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.804-811
• /
• 2019

본 연구는 매체형 전동밀(전동 볼 밀)에서 매체선정에 관한 공정조건 최적화를 위하여, 직경과 재질이 각각 다른 3가지 종류의 분쇄매체를 이용, 매체의 움직임을 실제 촬영하고 DEM 시뮬레이션을 병행하여 비교 연구하였다. 시뮬레이션에서는 밀의 회전속도, 매체의 재질, 매체의 운동속도, 매체와 포트 벽면과의 마찰계수 등을 실제 실험조건과 동일하게 조건을 맞추었다. 다양한 종류의 분쇄매체의 움직임을 실제 촬영된 사진 및 시뮬레이션에서 해석된 스냅샷 사진 위에, 본 연구에서 정의한 분쇄장을 설정하여 해석함으로써 그 값을 정량적으로 측정하였다. 또한, 정량적으로 측정된 값과 분쇄시료의 변화된 모습을 관찰하여 그 상관관계를 검토하였다. 따라서 특정 실험조건에서 분쇄장에 가장 큰 영향을 주는 분쇄매체의 최적화를 제언 하고자 하였다.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.286-295
• /
• 2021

This study attempts to find optimal conditions of the friction coefficient using a discrete element method (DEM) simulation with various friction coefficient conditions and three different grinding media with various ball sizes in a traditional ball mill (TBM). Using ball motion of the DEM simulation are obtained using the optimal friction coefficient compared with actual motion; photographs are taken by the digital camera and the snapshot images are analyzed. In the simulation, the rotation speed of the mill, the materials and velocity of the grinding media, and the friction coefficient between the balls and the wall of the pot are fixed as the actual experimental conditions. We observe the velocity according to the friction coefficient from the DEM simulation. The friction coefficient is found to increase with the velocity. Milling experiments using a traditional ball mill with the same experimental conditions as those of the DEM simulation are conducted to verify the simulated results. In addition, particle morphology change of copper powder is investigated and analyzed using scanning electron microscopy (SEM) for the milling experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.243-244
• /
• 2006

In this paper, the development of an error measurement system of 5-axis mill & turn machine tool presented by double ball bar test, which has been widely used to measure the overall accuracy of machining center. and the reliability of an error measurement system of 5-axis mill & turn machine tool was secured by the direct cutting test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.765-768
• /
• 2005

Ball end milling is widely used in machining free surfaces. It is important to predict machining forces in this machining. In this study, cutting forces are predicted for different machining conditions in ball end mill contouring machining. These cutting forces influence tool deflection. In this study tool deflection is calculated for various cutting conditions. The model developed in this study can be used to predict machining accuracy in contouring machining.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.125-128
• /
• 1997

They use a Ball End-mill in order to manufacturing sculptured surface when making metal mold, mold, cars and aircraft. In the work of a Ball End-mill case, customers do not often satisfied with manufacturing precision. Eventually, they have to re-work for the purpose of meeting manufacturing precision. There are resulted in lots of loss, whereby, in terms of both time and costs. The reasons of tolerance reducing manufacturing precision are thermal strain, the surface is damaged because of increasing cutting force and tool wear, tool deflection etc.. We focus on, however, manufacturing precision caused due to deflection of tool.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.347-350
• /
• 2003

Many researches on the prediction of cutting forces of ball-end mil is have been achieved since before several decades ago. These kinds of researches have been concentrated on the study on how to make the prediction equations for the cutting forces based on 2-D cutting experimentation. The results of them were really good and impressive. But it's not proper to practical uses for industrial fields, because if sculptured surface were to be machined, then it would be very difficult to understand the complicated kinematical interaction between the sculptured surface and the flutes of a ball-end mill. So, we propose the method for solving these kind of problems using existed commercial CAD/CAM software; Unigraphics. Furthermore, the modification of tool path which is done off line is offered to increase the precision of cutting.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.119-126
• /
• 2007

Generally, the machinability of materials that have a good mechanical properties is poor. The material having a high strength, high toughness in high temperature and wear resistance, it is difficult to remove a chip from workpiece. STD11 and NAK80 are kinds of these materials and these materials can be used in many industrial fields. But it is limited in use because of high cost and poor machinability. In this experimental study, the cutting of STD11 and NAK80 were used to decide the machinability and the tool shape of CBN ball end mill. From the results, the CBN ball end mill is verified that the estimated cutting edge shape of rake angle 30 degree has consistent effect on the tool wear and cutting force.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.52-57
• /
• 2000

STD11 is one of difficult-to-cut materials and its cutting characteristic data is not built enough. A bad cutting condition of it leads to low productivity of die and mould, so it is necessary to evaluate the machining characteristics of STD11. In this paper, the relations of the geometry of ball-end mill and mechanics of machining with it are studied. The helix angle of ball-end mill varies according to a location of elemental cutting edge in the cutting process are difficult to calculate accurately. To calculate instantaneous cutting forces, it is supposed that the tangential, radial and axial cutting force coefficients are functions of elemental cutting edge location. Elemental cutting forces in the x,y and z direction are calculated by coordinate transformation. The total cutting forces are calculated by integrating the elemental cutting forces of engaged cutting edge elements. This model is verified by slot and side cutting experiments of STD11 workpiece which was heat-treated to HRC45.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.532-537
• /
• 2007

A series of wet grinding experiments have been carried out using a stirred ball mill to systematically investigate consideration of grinding characteristics. The particle size distribution and median diameter of the grinding consumption power for a given grinding time were considered. Also, the effect of grinding aids on particle size and grinding consumption energy defined as the summation of grinding power was investigated. The grinding aids had influence on the smaller products size and decrease grinding consumption energy because the function of grinding aids were to be attribute to the prevention of agglomeration and ball and grinding chamber wall coating of sample powder. The grinding process seemed to be controlled by the force of agglomeration of the ground products. It was demonstrated that the particle size and grinding consumption energy could be more decreased by the addition of grinding aids.