• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.1-8
• /
• 2000

This study is conducted to evaluate the effects of root restriction on growth of maple(Acer palmatum Thumb.). Tow types of container such as clay pot(CP), root control bag(RCB) were used to restrict maple's root and each type of container was divided into 5 sizes. The containers with plants were buried just below the soil level and maples planted directly in the soil (nonrestricted root treatment) were included as comparison. Data were collected on dry weight of leaf, trunk, thick root, rootlet and soil water potential. We have analyzed, simple linear regression, Pearson's Correlation analysis, Duncan's multiple rang test, and Covariance Analysis using SAS statistical software. The results of analysis based on these data are as follows; 1. Total dry weight of maple in CP was significantly larger than in RCB. 2. Difference in growth reduction by the kinds of containers was induced by different hydraulic diffusion ratios between container and soil. Difference in growth reduction by the size of container was induced by the difference density of rootlet and soil moisture contents in the container. 4. Commercial products of root control of root control bag appeared not proper for countries in which fluctuation of rainfall is severe. Because maples in RCB were restricted by excess soil water in the rainy season, or by lack of soil water in the dray season.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.17-25
• /
• 2014

The purpose of this paper is to present a method to estimate the storage life of propellant bag for degradation of breaking load with storage time by using gamma process model. The nitrogen compound generated by natural decomposition of propellants degrades the breaking load of propellant bag with time. The statistical distributions of condition and lifetime with time were shown from the results of accelerated life test of propellant bag cloth at $80^{\circ}C$. It was found that the use of median for life was highly appropriate and the $B_1$ or $B_5$ life should be selectively applied to the quality assurance policy.

• Computers and Concrete
• /
• v.16 no.5
• /
• pp.741-757
• /
• 2015

In the last decade, several modeling approaches have been proposed and applied to estimate the high-performance concrete (HPC) slump flow. While HPC is a highly complex material, modeling its behavior is a very difficult issue. Thus, the selection and application of proper modeling methods remain therefore a crucial task. Like many other applications, HPC slump flow prediction suffers from noise which negatively affects the prediction accuracy and increases the variance. In the recent years, ensemble learning methods have introduced to optimize the prediction accuracy and reduce the prediction error. This study investigates the potential usage of bagging (Bag), which is among the most popular ensemble learning methods, in building ensemble models. Four well-known artificial intelligence models (i.e., classification and regression trees CART, support vector machines SVM, multilayer perceptron MLP and radial basis function neural networks RBF) are deployed as base learner. As a result of this study, bagging ensemble models (i.e., Bag-SVM, Bag-RT, Bag-MLP and Bag-RBF) are found superior to their base learners (i.e., SVM, CART, MLP and RBF) and bagging could noticeable optimize prediction accuracy and reduce the prediction error of proposed predictive models.

• The Korean Journal of Emergency Medical Services
• /
• v.16 no.2
• /
• pp.67-74
• /
• 2012

Purpose : The purpose of this study is to get basal user guidelines of safer bag-valve-mask application on patient with normal pulmonary patho-physiologic condition. Methods : This study was accomplished by pre-qualified 25 EMS junior grade students. Participants were instructed randomly compress bag to one-third, half and total and also with differesnt compression speed. Resultant tidal volumes and mean airway pressures obtained in RespiTrainer were analysed in relation to the each compression depth and rate. Results : Demographic difference does not affect tidal volume with any compression depth and rate change. Increasing compression depth is correlated with tidal volume increasement at any compression rate and also with mean airway pressure. If the compression depth is same, compression rate change did not affect significantly the resultant tidal volume or mean airway pressure. Conclusion : Hand size, Experience, BMI dose not affect tidal volume. Compress the 1600 ml bag half to total amount is safe way to offer sufficient tidal volume without risky high airway pressure delivery to patient airway who with normal lung patho-physiologic condition.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2675-2679
• /
• 2009

This paper reports the example of headspace mulberry paper bag micro solid phase extraction (HS-MPB-$\mu$-SPE) as a new sampling method for the determination of volatile flavor composition of coriander seeds. Adsorption efficiencies between two configurations of mulberry paper bag were compared, and several parameters affecting the HS-MPB-$\mu$-SPE were investigated and optimized. The optimized technique uses an adsorbent (Tenax TA, 0.1 mg) contained in a mulberry paper bag of front configuration where fine surface was outside, and minimal amount of organic solvent (0.6 mL). Linalool and $\gamma$-terpinene were found as abundant flavor compounds from coriander seeds. The limit of detection (LOD) and the limit of quantitation (LOQ) for linalool of major flavor in coriander seeds were 10.3 ng/mL and 34.4 ng/mL, respectively. The proposed method showed good reproducibility and good recovery. The HS-MPB-$\mu$-SPE is very simple to use, inexpensive, requires small sample amounts and solvent consumption. Because the solvent for extraction is reduced to only a very small volume, there is minimal waste or exposure to toxic organic solvent and no further concentration step.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.279-284
• /
• 2006

Activated carbon is proposed as a new application of wastepaper recycling other than the paper-making. Waste kraft bag is considered to be a suitable raw material for activated carbon because of its low ash content. Small pellets of wastepaper squeezed out from the continuous kneader were carbonized in a nitrogen atmosphere and activated using carbon dioxide. The BET specific surface areas of activated carbon prepared from waste kraft bag was $1,285m^{2}/g$, which is higher than commercially available activated carbons. The activated carbon prepared from wastepaper has a well-developed porous structure, particularly in mesopore and macropore ranges. As a result, activated carbon with iodine adsorption capacity of 1,400 mg/g was obtained from waste kraft bag. In this paper, adsorption amount of Bisphenol A (BPA) was determined to investigate adsorbability of activated carbon from waste kraft bag. Adsorption measurements were on solutions ranging from $0.1{mu}g/L\;to\;100mg/L$. The activated carbon from waste kraft bag gave higher BPA adsorbabilities over a wide range, compared with commercially available activated carbons.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.104-111
• /
• 2019

This study was developed using the DTP (digital textile printing) jacquard fabrics with a three-dimensional pattern for bag and evaluated the preference and emotional structure. The following conclusions were obtained. Three-dimensional patterns of 12 species using the illustrator program, including six kinds of designs based on the text and six kinds of character types based on the geometry of the basic design was developed. As a result of evaluating the preference of the three-dimensional pattern jacquard fabric, the most preferred fabric was a three-dimensional patterned jacquard fabric with a motif of the Korean consonant "ㅅ". The results of analyzing the emotional dimension of the three-dimensional pattern jacquard fabric, eight factors including simple image, feminine image, exotic image, graphic image, sporty image, masculine image, dynamic image and stereoscopic image were derived. Between emotional factors and preferences correlation analysis showed the stronger the simple image, the feminine image, and the sporty image, the more preferable. It suggested the possibility of a morphological and new fabric for bag, textile design motifs by using Hangul consonants attempt to limit the flatness of the existing geometric form patterns that can be applied to three-dimensional bag whether swirly patterns overcome.

• Journal of Fashion Business
• /
• v.24 no.6
• /
• pp.89-108
• /
• 2020

Wearable bags are body-worn bags, integrated with clothing or accessories, and they can liberate the wearer's hands, offering enhanced mobility. The main purposes of this research were: a) to analyze wearable bag design cases ranging from historical costumes to contemporary fashion; b) to develop wearable bag designs using various defined design methods, styles, and features and prototypes; and c) to evaluate people's satisfaction with the developed wearable bags and their differences among people with different innovativeness levels. Thus, the wearable bag design cases involved in this study were researched and collected from previous literature searches. then, the wearable bag designs were developed and prototyped. Next. an evaluation survey was conducted using questions that assessed satisfaction with overall design and function, use and purchase intention, and consumer innovativeness. The results are expected to enhance the understanding of wearable bags and provide guidelines for designers who develop wearable bags. The results indicated that 80% or more of the surveyed people were satisfied with the design and function of the developed wearable bags. They perceived that the bags were easy to use and useful, and wanted to use and purchase them. Consumers with high social, functional, and hedonic innovativeness were more satisfied and perceived these wearable bags as easier to use and more useful and wanted to use and purchase them more than consumers with low innovativeness. This study can be helpful to designers developing wearable bags by providing a better understanding of wearable bags and consumer perceptions.

• The Research Journal of the Costume Culture
• /
• v.30 no.2
• /
• pp.319-329
• /
• 2022

This study started from the practical need for a career experience program in the fashion major that is creative and responds to current methodologies. The purpose of this study is to propose a fashion work experience program that combines digital technology and practical experience. The research methods and procedures were as follows: fashion items and wearable devices were selected, the LED smart bag program was developed, and it was executed. A total of 123 students participated in the program, and a satisfaction survey was conducted after observation and oral evaluation. All of the participants completed the LED smart bag processes of design ideation, material selection, production, and styling using an eco-bag (one of the fashion items and as an LED wearable device). As a result of the participants' satisfaction (on a 5-point scale), most items showed a high level of satisfaction of 4.39 points or more. The smart bag program was evaluated to increase interest based on the time allotted and the students' level and to bolster their understanding of, and interest in, the fashion major. Therefore, this study is expected to be baseline to explore diversification of the fashion major work experience program, in order to create interest in the fashion major based on creative convergence competency.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.167-173
• /
• 2008

In order to solve the reproduction problem of PCB, we carried out poly chlorinated biphenyl (PCB) removal at low temperature (< $220^{\circ}C$), which could not take place reproduction of PCB by over 90% on catalyst. We coated catalyst to commercial bag filter for simultaneous removal of PCB and particle. It was found that PCB could be not reproducible due to it's decomposition of benzene ring. The coating method of spray type was more useful than that of precipitation one. PCB removal conversion was highest on the Pt-Co catalyzed bag filter. The data of this study can be well used in order to remove PCB and particle simultaneously for incinerator process by substituting commercial bag filter to catalyzed bag filter.