• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.54-61
• /
• 1995

Simultaneous forward-backward extrusion upsetting has been carried out by ratray forging. Two materials has been used commericaly 6.61 aluminium ally and 0.2% steel. The effects of working conditions ; spiral feed ; initial aspect ration of specimen and lubricating condition on the backward and forward extrusion were clarified. The extrusion length increases a sthe aspect rationof the specimen increases, the backward extrusion lengthbeing relatively larger than the forward one. The effects of the spiral feed and the material on the extrusion lengthis remarkably large for the large spiral feed.

• Physical Therapy Rehabilitation Science
• /
• 제10권2호
• /
• pp.98-105
• /
• 2021

Objective: The purpose of this study was to examined the kinematic relationship and differences through the range of motion (ROM), muscle activity, and vertical ground reaction force (VGRF) during forward and backward lunge movements, which are effective in improving muscle strength and balance ability of the lower extremities, and to provide clinical information on more efficient lunge movements. Design: Cross-sectional study Methods: Fifteen adult males who met the selection criteria were tested for their dominant feet.Forward and backward lunges were then performed, and the ROM, muscle activity, and VGRF were measured for kinematic analysis during the lunge movement.The differences betweenthe forward lunge and backward lunge intervention were examined using a paired t-test. Results: A significant increase in the ROM of the knee and ankle was observed during the forward and backward lunges (p<0.05). In addition, in terms of the muscle activity, the peak values of the vastus medialis oblique (VMO) and VGRF also showed a significant increase in the forward lunge compared to the backward lunge (p<0.05). Conclusions: This study showed an increase in VGRF peak value, knee and ankle ROM, and VMO muscle activity during forward lunge. Based on these results, it is considered necessary to apply differently depending on the direction of progress in consideration of the musculoskeletal situation and physical ability during the lunge movement.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.149-163
• /
• 2006

The purpose of this study was to compare the lower extremity's joint and segment coupling patterns between forward and backward running in subjects who were twelve healthy males. Three-dimensional kinematic data were collected with Qualisys system while subjects ran to forward and backward. The thigh internal/external rotation and tibia internal/external rotation, thigh flexion/extension and tibia flexion/extension, tibia internal/external rotation and foot inversion/eversion, knee internal/external rotation and ankle inversion/eversion, knee flexion/extension and ankle inversion/eversion, knee flexion/extension and ankle flexion/extension, and knee flexion/extension and tibia internal/external rotation coupling patterns were determined using a vector coding technique. The comparison for each coupling between forward and backward running were conducted using a dependent, two-tailed t-test at a significant level of .05 for the mean of each of five stride regions, midstance(1l-30%), toe-off(31-50%), swing acceleration(51-70%), swing deceleration(71-90), and heel-strike(91-10%), respectively. 1. The knee flexion/extension and ankle flexion/extension coupling pattern of both foreward and backward running over the stride was converged on a complete coordination. However, the ankle flexion/extension to knee flexion/extension was relatively greater at heel-strike in backward running compared with forward running. At the swing deceleration, backward running was dominantly led by the ankle flexion/extension, but forward running done by the knee flexion/extension. 2. The knee flexion/extension and ankle inversion/eversion coupling pattern for both running was also converged on a complete coordination. At the mid-stance. the ankle movement in the frontal plane was large during forward running, but the knee movement in the sagital plane was large during backward running and vice versa at the swing deceleration. 3. The knee flexion/extension and tibia internal/external rotation coupling while forward and backward run was also centered on the angle of 45 degrees, which indicate a complete coordination. However, tibia internal/external rotation dominated the knee flexion/extension at heel strike phase in forward running and vice versa in backward running. It was diametrically opposed to the swing deceleration for each running. 4. Both running was governed by the ankle movement in the frontal plane across the stride cycle within the knee internal/external rotation and tibia internal/external rotation. The knee internal/external rotation of backward running was greater than that of forward running at the swing deceleration. 5. The tibia internal/external rotation in coupling between the tibia internal/external rotation and foot inversion/eversion was relatively great compared with the foot inversion/eversion over a stride for both running. At heel strike, the tibia internal/external rotation of backward running was shown greater than that of forward(p<.05). 6. The thigh internal/external rotation took the lead for both running in the thigh internal/external rotation and tibia internal/external rotation coupling. In comparison of phase, the thigh internal/external rotation movement at the swing acceleration phase in backward running worked greater in comparison with forward running(p<.05). However, it was greater at the swing deceleration in forward running(p<.05). 7. With the exception of the swing deceleration phase in forward running, the tibia flexion/extension surpassed the thigh flexion/extension across the stride cycle in both running. Analysis of the specific stride phases revealed the forward running had greater tibia flexion/extension movement at the heel strike than backward running(p<.05). In addition, the thigh flexion/extension and tibia flexion/extension coupling displayed almost coordination at the heel strike phase in backward running. On the other hand the thigh flexion/extension of forward running at the swing deceleration phase was greater than the tibia flexion/extension, but it was opposite from backward running. In summary, coupling which were the knee flexion/extension and ankle flexion/extension, the knee flexion/extension and ankle inversion/eversion, the knee internal/external rotation and ankle inversion/eversion, the tibia internal/external rotation and foot inversion/eversion, the thigh internal/external rotation and tibia internal/external rotation, and the thigh flexion/extension and tibia flexion/extension patterns were most similar across the strike cycle in both running, but it showed that coupling patterns in the specific stride phases were different from average point of view between two running types.

• 대한인간공학회지
• /
• 제20권2호
• /
• pp.47-57
• /
• 2001

To simulate an actual slip to measure floor slipperiness, slip resistance testers simulate slip in only forward direction because forward slip in the landing phase was found to be the most important factor for loss of balance. Backward slip in the take off phase was possible but was excluded in the friction test protocol because it was not dangerous. However, backward slip was tested in the friction test protocol without any theoretical background of the significance in generating dangerous slips and falls and was proven to be as good as forward slip in measuring floor slipperiness. Therefore, this study was designed to investigate the significance of backward slip in generating dangerous slips and falls with different combinations of floor and shoe sole. The results showed different tendency of backward slip in take off phase being significant in generating dangerous slips and falls because backward slip in the takeoff phase affected gait pattern disturbances seriously. resulted in dangerous falls. Fast toe velocity increased the severity of backward slip and confirmed the significance of backward slip in generating dangerous slips and falls. As a result, this study recommends the utilization of backward slip in the measurement of floor slipperiness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.158-161
• /
• 2003

Extrusion of forward-gear and backward-rod by combined extrusion with controlling the extrusion velocity using a counter tool is studied. In the combined forward-backward extrusion with controlling extrusion velocity, only parts with short gear can be formed. To obtain longer gear parts, extrusion with reverse ram motion is carried out after the combined forward-backward extrusion process. In this method, combined forward-backward extrusion is carried out until excessive extrusion length is attained and then, the motion of the punch is stopped and the counter tool is moved in the inverse direction and returned to the position for obtaining the desired extrusion length. The experiment is carried out by using lead for billets as a model material. With reverse ram motion, longer gear teeth without under-filling defect can be formed than that by only combined extrusion with controlling extrusion velocity.

• 한국전문물리치료학회지
• /
• 제28권4호
• /
• pp.273-279
• /
• 2021

Background: Lunge exercises are lower extremity rehabilitation and strengthening exercises for patients and athletes. Most studies have shown the effectiveness of the forward and backward lunge exercises for treating patellofemoral pain and anterior cruciate ligament injuries (by increasing lower extremity muscle activity) and improving kinematics. Objects: However, it is not known how the two different lunge movements affect trunk muscle activities in healthy individuals. The purpose of this study was to investigate the electromyographic activity of the rectus abdominis and erector spinae muscles during forward and backward lunge exercises in healthy participants. Methods: Twelve healthy participants were recruited. Electromyographic activity of the rectus abdominis and erector spinae was recorded using surface electrodes during forward and backward lunges, and subsequently normalized to the respective reference voluntary isometric contractions of each muscle. Results: Activity of the erector spinae was significantly higher than that of the rectus abdominis during all stages of the backward lunge (p < 0.05). The activity of the erector spinae was significantly greater during the backward than forward lunge at all stages (p < 0.05). Conclusion: Backward lunging is better able to enhance trunk motor control and activate the erector spinae muscles.

• 한국광학회지
• /
• 제10권2호
• /
• pp.89-94
• /
• 1999

파장 1.06$\mu\textrm{m}$ Nd:YAG 펌프레이저의 인가에너지와 라만매질 CH4의 압력변화에 따른 전방과 후방 1.54$\mu\textrm{m}$ 유도라만 산란광(stimulated Raman scattering)의 출력 특성을 동시에 측정하여 전후방 유도라만 산란광 발생을 위한 1.06$\mu\textrm{m}$ 인가문턱 에너지, 라만변환의 기울기 효율 및 라만이득계수(Raman gain coefficient)의 측정값과 이론값을 비교 분석하였다. 압력1000 psi에서 후방 기울기 효율은 약 34%이고 전방은 약 18%를 보였다. 라만매질 CH4의 압력이 증가할수록 전방과 후방 라만이득은 비선형적으로 증가할 뿐만아니라, 후방 대 전방 라만이득비도 증가하였다. 압력 1200 psi 이상에서 후방 대 전방 라만이득비는 약 1.4배가 되었고, 압력 1400 psi에서 후방 라만이득계수는 0.32cm/GW이고 전방에서는 0.23cm/GW로 나타났다. 이와 같은 비대칭적 발생은 전방 라만증폭이 펌프광의 국부적 세기와 작용하는 반면 후방은 펌프광의 평균세기와 상호작용하기 때문이다.

• 한국운동역학회지
• /
• 제12권1호
• /
• pp.221-231
• /
• 2002

The purpose of this study was to clarify the differences in service patterns of a forward and backward soft tennis players using 3D motion analyzer. Subjects were 4 forward players of $24.0\pm5.23$yrs and 4 backward players of $23.5\pm1.73$yrs. The results were as following: 1. There was no difference among each positions on swinging-time. The longest racket swinging-time was in the phase of takeback, the second one was in follow-through. The shortest one was in the phase of forward-swing so called force production phase, which had an influence on ball's velocity. 2. The racket speed on impact was 16.3m/s in forward subject and 19.53m/s in backward subject, when each velocity of balls was 44.6m/s, 52.9m/s. Although there was no significant difference along by positions, backward subject showed faster result. 3. The maximum speed of each performance was reached before the impact, and the speed at impact along by positions did not show any significant difference. The summation of velocity was measured in good order as following; hip, shoulder, elbow, wrist, top of racket. 4. In the angular velocity of all examine except one, the angular velocity of forearm was bigger than the one of racket top although there was no statistically significant difference between forward and backward subject. 5. The service grip of the forward players was shorter than that of backward players.

• 한국전문물리치료학회지
• /
• 제12권1호
• /
• pp.63-70
• /
• 2005

To compare the effects of forward walking and backward walking on surface electromyographic analysis of quadriceps muscles at treadmill grades of 0%, 5% and 10%, subjects were randomized to eleven athletics (5 females, 6 males), with a mean age of 17.8 years, and a SD of 4.66 years. The values of the surface electromyographic (SEMG) activity of the rectus femoris (RF), vastus lateralis (VL) and vastus medialis oblique (VMO) were measured during forward walking and backward walking on a treadmill at grades of 0, 5 and 10%. The subjects walked for approximately 10 seconds at 4.0 km/h. The data were analyzed by repeated measuring of the two-way ANOVA and analyzed by a paired t-test between forward walking and backward walking. The SEMG activity levels of the RF, VL and VMO were the highest when both the forward walking and backward walking increased incrementally for treadmill grades of 0% to 10%, but the VMO/VL ratio had no significant changes. The SEMG activity levels of the RF, VL and VMO were significantly different between directions. However, SEMG activity levels of the RF, VL, VMO and VMO/VL ratio did not show significant difference among the treadmill grades. No statistically significant interactions were detected between the direction of walking and treadmill grade. Backward walking on the treadmill at 4 km/h and grades of 0%, 5%, 10% elicited a greater SEMG activity on the quadriceps muscles than did forward walking under the same conditions. The results suggest that the quadriceps may be effectively activated by performance at treadmill grades of 10%. This investigation confirms that backward walking up an incline may place additional muscular demands on individuals.

• 소음진동
• /
• 제6권6호
• /
• pp.819-825
• /
• 1996

Nonlinear dynamic characteristics of rubbing phenomenon in rotor dynamics are investigated experimentally and numerically. Rubbing phenomenon occurs when rotor contacts with stator during whirling and causes the large amplitude of vibration, high whirl frequencies, and possibly catastrophic failure. Rubbing has various types of forward whirl, backward rolling, backward slipping, and partial rub depending on the system parameters of rotating machinery and running speed. Experiments are performed for forward whirl and backward whirl. And numerical analysis are conducted to explain the changes between backward rolling and backward slipping. Experimental and numerical results show that the types of whirling motion depends on the friction coefficient between rotor and stator and the eccentricity of rotor.