• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.300-303
• /
• 2002

Combined generation system of Photovoltaic and wind generation have shortcoming that is different output power according to change of weather. So, the combined generation system is required backup system that such as a storage battery to supply energy, when not enough photovoltaic and wind power source for power supply equally and continually because the energy source is changeable and stable through change of weather as irradiation. temperature, wind speed. wind direction. seasons, etc.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1107-1114
• /
• 2012

In this paper, we propose protective coordination and automatic setting method using agents for distribution system with loop. The proposed protection scheme adopts an agent technology assuming communication among protection agents and auto-switch agents. Having exchanged fault-related information with each other, protection agents and auto-switch agents perform the primary and backup protection and fault section isolation, respectively. this proposed scheme using agents for distribution system with loop is implemented by matlab. Because of the various configuration of distribution system, It's difficult to find cooperative agents for each agent. This paper develops a program to automatically set the cooperative route for the agents.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.74-77
• /
• 2002

Combined generation system of Photovoltaic and wind generation have shortcoming that is different output power according to change of weather. So, the combined generation system is required backup system that such as a storage battery to supply energy, when not enough photovoltaic and wind power source for power supply equally and continually, because the energy source is changeable and stable through change of weather as irradiation, temperature, wind speed, wind direction, seasons, etc..

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.163-164
• /
• 2014

의사위성은 GPS 위성의 백업 시스템으로 활용하거나 실내항법을 위한 목적으로 운용되며, 지상에 설치되어 GPS 위성과 유사한 신호를 송신한다. 의사위성의 의사거리 측정치 활용을 위해서는 항법 시스템과 의사위성간의 시각동기가 필수적이다. 본 논문에서는 GPS 위성과 의사위성간 시각동기를 위한 모니터링 시스템의 설계를 제안한다. 모니터링 시스템을 통해 의사위성의 시각동기 정확도를 분석하고 시각오차 보정에 활용하도록 한다.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1410-1417
• /
• 2006

The metal processing system usually consists of various components such like motors, work rolls, backup rolls, idle rolls, sensors, etc. Even a simple fault in a single component in the system may cause a serious damage on the final product. It is therefore necessary to diagnose the faults of the components to detect and prevent system failure. Especially, the defects in a work roll are critical to the quality of strip. It is especially difficult to detect faults of a roll by using the existing frequency analysis method if the speed of the roll is changing. In this study, a new diagnosis method for roll eccentricity under the roll speed changes was developed. The new method was induced from analyzing the rolling mechanism by using rolling force models, radius-speed relationship, and measured rolling force, etc. Simulation results by using the field data show that the proposed method is very useful.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2326-2332
• /
• 2011

eLoran is enhanced Loran-C and eLoran is researched for as GPS backup system because this system is resistant to signal interference and has high accuracy. TOA measurements of eLoran include errors proportional to the range such as PF, SF, ASF and EF. Therefore these error factors must be compensated for improved accuracy of position. Generally, error models or GPS aided compensation methods are used, but these methods are limited by lack of infrastructure or system performance. Therefore, this paper proposes new model of error factors included in eLoran TOA measurements and navigation algorithm using this model. Error factors in this model are sum of a certain size of error and error proportional to the range. And feasibility and performance of proposed navigation algorithm are verified by using raw measurements.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.284-291
• /
• 2007

This study was to investigate performance of position, basic controls and additional control for man-machine interface on a 3-point hitch of a tractor. The developed additional control was one-touchup, backup, turnup, liftarm limited, PTO on/off and an external control. As a result of experiment, maximum steady state error of response system was lower than $0.8^{\circ}$ and this result showed the function operated normally because the dead band of system set was ${\pm}1^{\circ}$. There was no abnormal situation by switch operation and sensor signal during the performance test. The results of experiment showed the characteristics of the response was sufficient to be used as the position and additional control system for tractors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.269-271
• /
• 2004

In this study, on-line measuring system were developed to verify performances and characteristics of electric braking system that is used in KTX(Korea Train eXpress) synthetically and efficiently Because KTX is commercial vehicle, effective measurement and evaluation of measuring signals were performed beyond the range of change for equipment components. KRRI(Korea Railroad Research Institute) described about running-braking measuring program, running-braking backup program and running-braking analysis program that were developed using a software called LabVIEW in this paper. Also, we analyzed the characteristics comparing experimental values with design values about braking distance, braking time, negative acceleration and braking effort in rheostatic braking and regenerative braking. In result, main performances and characteristics for electric braking system in KTX were verified.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2174-2181
• /
• 2004

The metal processing system usually consists of various components such as motors, work rolls, backup rolls, idle rolls, sensors, etc. Even a simple fault in a single component in the system may cause a serious damage on the final product. It is, therefore, necessary to diagnose the faults of the components to detect and prevent a system failure. Especially, the defects in a work roll are critical to the quality of strip. In this study, a new 3-D diagnosis method was developed for roll shape defects in rolling processes. The new method was induced from analyzing the rolling mechanism by using a rolling force model, a tension model, the Hitchcock's equation, and measurement of the strip thickness, etc. Computer simulation shows that the proposed method is very useful in the diagnosis of the 3-D roll shape.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.329-332
• /
• 2005

인터넷이 발달하면서 기존의 문서들이 웹을 통해 제공된다. 시간이 흐를수록 이들 정보들은 수정 및 추가 등을 통해 데이터의 양은 증가한다. 웹이 광범위하게 사용됨에 따라 정보를 획득하기 위해 대다수의 사용자들이 웹에 의존하고 있으며, 이로 인해 웹을 통한 데이터 관리의 필요성이 증가하고 있다 네트워크로 연결되어 있는 환경에서는 갑작스런 시스템 장애가 자주 발생하며, 이런 위험으로부터 데이터를 안전하게 관리 보호하는 것이 중요한 업무 중 하나이다. 본 논문에서는 웹상에서 백업과 복구를 통해 데이터 관리를 체계적이고 효율적이며 안정적으로 처리할 수 있는 시스템을 제안한다.