• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.935-941
• /
• 2012

This paper describes a study of conventional electrical rig and simulated application of Flywheel Energy Storage system on the power system of the offshore plants with dynamic positioning system with the following aims: improve fuel consumption on engines, prevent blackout and mitigate voltage sags due to pulsed load and fault. Fuel consumption has been analyzed for the generators of the typical drilling rigs compared with the power plant with Flywheel Storage Unit which has an important aid in avoiding power interruption during DP (Dynamic Positioning) operation. The FES (Fly wheel Energy storage System) releases energy very quickly and efficiently to ensure continuity of the power supply to essential consumers such as auxiliary machinery and thrusters upon main power failure. It will run until the standby diesel generator can start and supply the electric power to the facilities to keep the vessel in correct position under DP operation. The proposed backup method to utilize the quick and large energy storage Flywheel system can be optimized in any power system design on offshore plant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1417-1422
• /
• 2003

An electrical cascade impactor is a multistage impaction device to separate airborne particles into aerodynamic size classes using electrical method. We designed a real-time three-stage electrical low-pressure impactor, which is proper to nanometer sized environmental aerosols. Performance evaluation was carried out for stage 1 and 2. The monodisperse liquid dioctyl sebacate (DOS) particles were generated using condensation-evaporation followed by electrostatic classification using DMA (differential mobility analizer) for particles with diameters in the range of $0.04{\sim}0.8{\mu}m$. The evaluation of the electrical impactor is based on the use of two electrometers, one connected to the impaction plate of the impactor, and the other to the faraday cage as backup filter. The results showed that the experimental 50% cutoff diameters in the operation pressure were 0.53 and $0.12{\mu}m$ for stage 1 and stage 2. The effect of operation pressure on the cutoff diameter and the steepness of collection effcieicy curves is investigated.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.197-203
• /
• 2012

본 논문에서는 광파장다중화(WDM) 기반 광인터넷 환경에서 논리적인 다중 링 구조에 의한 통신망 복구 기법의 대역폭 효율성을 연구한다. 이 방법은 링 토폴로지의 특성을 이용해 빠르고 간단한 복구 동작을 제공하며, 지역적인 복구를 수행한다. 동시에 다중 링 구성을 통하여 대체 경로의 분산과 공유 정도를 높이고 단위 링크당 예약되어야 하는 예비 광파장의 수를 줄임으로써 전체 통신망 자원 이용의 효율성을 높일 수 있다. 본 논문에서는 위험공유링크그룹(SRLG) 개념을 이용하여 링크 손실을 복구하는데 필요한 예비대역폭 비율을 토폴로지상의 Cut-Set을 이용해 계산하고 이를 실험을 통해 비교 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.99-115
• /
• 2020

Since GNSS is easily affected by jamming and/or spoofing, alternative navigation systems can be operated as backup system to prepare for outage of GNSS. Alternative navigation systems are being researched over the world, and a multi-radio integrated navigation system using alternative navigation systems such as KNSS, eLoran, Loran-C, DME, VOR has been researched in Korea. Least Square or Kalman filter can be used to estimate navigation parameters in the navigation system. A large number of measurements of the Kalman filter may lead to heavy computational load. The decentralized Kalman filter and the federated Kalman filter were proposed to handle this problem. In this paper, the decentralized Kalman filter and the federated Kalman filter are designed for the multi-radio integrated navigation system and the performance evaluation result are presented. The decentralized Kalman filter and the federated Kalman filter consists of local filters and a master filter. The navigation parameter is estimated by local filters and master filter compensates navigation parameter from the local filters. Characteristics of three Kalman filters for a linear system and nonlinear system are investigated, and the performance evaluation results of the three Kalman filters for multi-radio integrated navigation system are compared.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.514-519
• /
• 2009

The purpose of this study is to show the method of applying snow thermal storage system through the analysis of the cases in Japan. The results were as follows. (1) The systems in Japan were installed at the location whose annual mean air temperature was $14.6^{\circ}C$ or below and annual snowfall was 59 cm or above. (2) By analyzing the characteristics of the systems, meltwater circulation system with a backup chiller was confirmed to be most suitable for Korea. (3) For the first time in Korea, the system with the snow storage of 500 ton was designed at Muju after analyzing regional climate characteristics.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.461-471
• /
• 2015

Recently, the estimation of the social cost of energy sources has been emphasized as various novel energy options become feasible in addition to conventional ones. In particular, the social cost of introducing measures to protect power-distribution systems from power-source instability and the cost of accident-risk response for various power sources must be investigated. To account for these risk factors, an integrated societal risk assessment framework, based on power-uncertainty analysis and accident-consequence analysis, is proposed. In this study, we applied the proposed framework to nuclear power plants, solar photovoltaic systems, and wind-turbine generators. The required capacity of gas-turbine power plants to be used as backup power facilities to compensate for fluctuations in the power output from the main power source was estimated based on the performance indicators of each power source. The average individual health risk per terawatt-hours (TWh) of electricity produced by each power source was quantitatively estimated by assessing accident frequency and the consequences of specific accident scenarios based on the probabilistic risk assessment methodology. This study is expected to provide insight into integrated societal risk analysis, and can be used to estimate the social cost of various power sources.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1071-1077
• /
• 2000

Recently, several attempts have been made to apply high Tc superconductor bearings of thrust type to flywheel energy storage system (FESS) throughout the world. Radial type superconductor bearings, however, have never been tried to the real FESS. KEPRI has developed its own radial type bearings and is now currently applying them to a FESS designed by KIMM, for the first time. In this paper preliminary test results of bearing performance and dynamic behavior of the flywheel rotor system mounted on them are presented. The dynamic properties, i.e, stiffness and damping, of the superconductor bearings were experimentally estimated using the static loading test as well as the impact test. The test revealed that stiffness value of the present superconductor bearings is about 67,700N/m and the damping value 29Ns/m. It was also found out that these bearings have some levitation drift problems due to excessive vibrations encountered while passing through the critical speeds. With recommend backup bearings to limit the vibration amplitudes of the rotor it is predicted that the flywheel rotor will show stable operations in the design speed range.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.197-203
• /
• 2004

A full finite element (FE)-based approach is presented for the precision analysis of the strip profile in flat rolling. Basic FE models for the analysis of the mechanical behavior of the strip and of the rolls are described in detail. Also described is an iterative strategy for a rigorous treatment of the mechanical contact occurring at the roll-strip interface and at the roll-roll interface. Then, presented is an integrated FE process model for the coupled analysis of the mechanical behavior of the strip, work roll, and backup roll in four-high mill. A series of process simulation are conducted and the results are compared with the measurements made in hot and cold rolling experiments.

• 한국ITS학회 논문지
• /
• 제9권6호
• /
• pp.129-135
• /
• 2010

본 논문은 애드 혹 네트워크에서 다중 경로 설정을 위한 탐색 기법을 제안한다. 데이터 경로 설정은 요구기반 방식으로 동작하며, 소스와 목적지 노드 간의 다중 경로는 초기 경로 설정 과정에서 함께 구해진다. 이러한 다중 경로는 데이터 경로의 백업이나 부하 분산에 사용될 수 있다. 제안 방식에서는 소스와 목적지 노드 간 다중 경로를 찾기 위해, 사전 질의 방법을 사용한다. 이 방안은 중간 노드에서 응답 메시지를 처리할 때, 주변 노드와의 정보 교환을 통해 최적의 다음노드를 선택하는 방안이다. 시뮬레이션 결과를 통해, 제안된 다중 경로 체계가 경로간의 만나는 횟수를 감소시켜 다중경로의 더 좋은 분리도를 주고, 노드들이 이동하는 환경에서 더 높은 경로 생존 확률을 달성함을 알 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제13권1호
• /
• pp.72-78
• /
• 2007

Determination of the local vertical is not trivial for a moving vehicle and in general will require corrections for the Earth geophysical deflection. The vehicle's local vertical can be estimated by INS integration with initial alignment in SDINS(Strap Down INS) system. In general, the INS has drift error and it cause the performance degradation. In order to compensate the drift error, GPS/INS augmented system is widely used. And in the event that GPS is denied or unavailable, celestial navigation using star tracker can be a backup navigation system especially for the military purpose. In this celestial navigation system, the vehicle's position determination can be achieved using more than two star trackers, and the accuracy of position highly depends on accuracy of local vertical direction. Modern tilt sensors or accelerometers are sensitive to the direction of gravity to arc second(or better) precision. The local gravity provides the direction orthogonal to the geoid and, appropriately corrected, toward the center of the Earth. In this paper the relationship between direction of center of the Earth and actual gravity direction caused by geophysical deflection was analyzed by using precision orbit simulation program embedded the JGM-3 geoid model. And the result was verified and evaluated with mathematical gravity vector model derived from gravitational potential of the Earth. And also for application purpose, the performance variation of pure INS navigation system was analyzed by applying precise gravity model.