• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.228-233
• /
• 2006

Survivability is a very important requirement for the deployment of broadband networks because out of service links can affect volumes of traffic even if it is a very short time. And the data paths of broadband networks, which are critical for traffic engineering, are always necessary to be well protected. The procedure of protection or restoration for a path is initiated when failure is detected within the working path. In order to minimize the influence on transmission quality caused by the failure of links and to provide a definite time for the recovery from the failure, the protection switching time (PST) should be carefully considered in the path arrangement. Several researches have been devoted to construct the protection and restoration schemes of data paths over dense wavelength division multiplexing (DWDM) networks, however, there was rare research on the design of data paths with guaranteed protection switching time. In this paper, the PST-guaranteed scheme, which is based on the concept of short leap shared protection (SLSP), for the arrangement of data paths in DWDM networks is proposed. The proposed scheme provides an efficient procedure to determine a just-enough PST-guaranteed backup paths for a working path. In addition to selecting the PST-guaranteed path, the network cost is also considered in a heuristic manner. The experimental results demonstrate that the paths arranged by the proposed scheme can fully meet the desired PST and the required cost of the selected path is competitive with which of the shared path scheme.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.64-66
• /
• 2006

DATS will connect with IMPS and LHGS to perform the reception of sensor data and the transmission of user's meteorological data, LRIT and HRIT. MODEM/BB will perform the de-commutation of received sensor data as MI and GOCI raw data according to VCID before sending them to MI and GOCI IMPS, respectively. Especially, MODEM/BB in SOC needs to be connected to six clients that consist of the primary and backup IMPS of MSC, KOSC and SOC. On the other hand, LRIT and HRIT delivered from LHGS are encoded as VITERBI and modulated by MODEM/BB. Considering sensor data transmitted from COMS, the assumed format and size of CADU are described in this paper. Finally, results related to the status of received LRIT and HRIT by frame synchronizer in user station are also described.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.467-472
• /
• 2013

Recently, the value of ICT-based medical devices, equipments, software and service development are is increased according to strengthening the convergence among ICT, medical technologies and services. This paper presents the new convergence business models by applying cloud service to medical industry. In order to develop the new convergence business models, we checked the validity and feasibility through analyzing the medical market environments such as medical data backup, medical regulation etc. and present the new convergence business models and the direction of commercial business models for customer acquisition, market expansion and competitiveness improvement. This study is to provide the guidelines for establishing the core capacity strengthening strategy and partnership cooperation strategy when we design a new convergence business models in various industrial fields.

• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.497-503
• /
• 2018

RHEL 7, the leader in the enterprise Linux market, has dramatically increased the maximum support specification, such as file system size, file size, etc., by changing the default file system from EXT to XFS. It's not just an increase in support specifications, it's working on daemons, and it's showing excellent performance on high-performance disks such as high-capacity disks and solid state drives. Changes in the file system mean changes in direct operating techniques, such as changing related commands, changing backup tools, and changing disk quota settings. The changes to the XFS file system are making a lot of changes to the operation of the Linux system, but we believe that the position of the Linux operating system in the server field will become stronger.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1911-1930
• /
• 2017

Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. The key to overlay routing is the placement and maintenance of the overlay infrastructure, especially, the selection and placement of key relay nodes. Spurred by the observation that a few relay nodes with high betweenness centrality can provide more optimal routes for a large number of node pairs, we propose a resilient routing overlay network construction method by introducing Super-Relay nodes. In detail, we present the K-Minimum Spanning Tree with Super-Relay nodes algorithm (SR-KMST), in which we focus on the selection and connection of Super-Relay nodes to optimize the routing quality in a resilient and scalable manner. For the simultaneous path failures between the default physical path and the overlay backup path, we also address the selection of recovery path. The objective is to select a proper one-hop recovery path with minimum cost in path probing and measurement. Simulations based on a real ISP network and a synthetic Internet topology show that our approach can provide high-quality overlay routing service, while achieving good robustness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.83-88
• /
• 2012

This paper studies the effects of wavelength conversion on self-healing optical networks. We examined the effects of wavelength conversion capability on the backup routing and the spare wavelength utilization. The efficiency of spare wavelength utilization is proportionally increased as the wavelength conversion capability increases, different from the call blocking probability for which about 30% of wavelength conversion capability shows nearly the same performance as full wavelength conversion capability. The spare resource utilization efficiency can be improved by using alternate routing and wavelength assignment algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1082-1088
• /
• 2003

This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a put of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver of controlling signals. By this way we could design a system of transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication. Based on window, It consist of ID generation, transmitter/receiver, control and backup part.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.103-111
• /
• 2010

For that reason, more and more growing of the internet speed, many kind of the multimedia as if the voice, a letter, a photograph, a moving picture are appearance and integration of the internet as if the wireless internet, the CATV, a satellite is forming. Today, many changes in the communication environment are occurrence. therefore a demands of the user keep up increase. so, in this paper, we developed the SOHO IP-PBX embedded which can automatically exchange the call. the developed IP-PBX have many functions as if the exchange call function, the gateway function, the PSTN backup function, the FAX function, the VPN function, etc. and verified it by an experiment on the rules in KT.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.935-941
• /
• 2012

This paper describes a study of conventional electrical rig and simulated application of Flywheel Energy Storage system on the power system of the offshore plants with dynamic positioning system with the following aims: improve fuel consumption on engines, prevent blackout and mitigate voltage sags due to pulsed load and fault. Fuel consumption has been analyzed for the generators of the typical drilling rigs compared with the power plant with Flywheel Storage Unit which has an important aid in avoiding power interruption during DP (Dynamic Positioning) operation. The FES (Fly wheel Energy storage System) releases energy very quickly and efficiently to ensure continuity of the power supply to essential consumers such as auxiliary machinery and thrusters upon main power failure. It will run until the standby diesel generator can start and supply the electric power to the facilities to keep the vessel in correct position under DP operation. The proposed backup method to utilize the quick and large energy storage Flywheel system can be optimized in any power system design on offshore plant.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1417-1422
• /
• 2003

An electrical cascade impactor is a multistage impaction device to separate airborne particles into aerodynamic size classes using electrical method. We designed a real-time three-stage electrical low-pressure impactor, which is proper to nanometer sized environmental aerosols. Performance evaluation was carried out for stage 1 and 2. The monodisperse liquid dioctyl sebacate (DOS) particles were generated using condensation-evaporation followed by electrostatic classification using DMA (differential mobility analizer) for particles with diameters in the range of $0.04{\sim}0.8{\mu}m$. The evaluation of the electrical impactor is based on the use of two electrometers, one connected to the impaction plate of the impactor, and the other to the faraday cage as backup filter. The results showed that the experimental 50% cutoff diameters in the operation pressure were 0.53 and $0.12{\mu}m$ for stage 1 and stage 2. The effect of operation pressure on the cutoff diameter and the steepness of collection effcieicy curves is investigated.