• 천문학회보
• /
• 제41권2호
• /
• pp.51.2-51.2
• /
• 2016

Hayabusa, the Japanese asteroid sample returning mission, acquired more than 1400 scientific images of its target asteroid (25143) Itokawa using the Asteroid Multi-band Imaging Camera (AMICA). It took images at a wide coverage of the phase angle a (Sun-Itokawa-Hayabusa) from $a{\sim}0^{\circ}$ to ${\sim}35^{\circ}$, providing a unique opportunity for studying the opposition effect (a sharp surge in brightness of asteroidal surface). Here we present a study of the opposition effect on Itokawa using the AMICA multi-band data. We found that (1) the opposition strength near the opposition is independent of the incident/emission angles of the light, also (2) it weakly depends on the wavelength showing the strongest surge around 0.7 um, and (3) the reflectance increases linearly at a>$1.5^{\circ}$ while nonlinearly at a<$1.5^{\circ}$ as approaching the opposition point. In particular, we noticed that the increasing rate has a correlation with the reflectance in the nonlinear domain whereas no detectable correlation with the reflectance in the linear domain. From these results, we conjecture that the coherent backscattering opposition effect is a dominant mechanism for the nonlinear opposition surge at a<$1.5^{\circ}$ while shadow hiding opposition effect is responsible for the linear opposition surge at a>$1.5^{\circ}$.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.272-278
• /
• 2015

The aim of this study is to find out the behavior and acoustic backscattering of the large jellyfish Nemopliema nomurai using hydroacoustics in situ. N. nomurai was distributed at depths ranging from 10~15 m during the day. Regarding the behavior of N. nomurai, there was no significant change in depth, and 3D tortuosity was not high. The vertical direction was ${\pm}10^{\circ}$ from the horizontal, and moving speed was $0.9{\sim}1.5\;m\;s^{-1}$. With regard to hydro-acoustical characteristics, the mean TS of N. nomurai ranged from -69.6~-56.0 dB at 38 kHz and -69.4~-54.5 dB at 120 kHz. TS variation (Max TS-Min TS) at 38 and 120 kHz was 0~10.2 dB and 0.2~16.0 dB, respectively. Mean TS and TS variation (Max TS-Min TS) of N. nomurai were higher at 120 kHz than at 38 kHz. The results showed that the use of hydroacoustics was effective in estimating the distribution depth, behavior, and acoustic characteristics of the target.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.117-124
• /
• 2023

This study used hydroacoustic method to identify the vertical and horizontal distribution of Antarctic silverfish in the Ross Sea, Antarctica. In February and December 2018, Antarctic silverfish was detected up to 250 meters, and was mainly distributed in water depths of 20 to 30 meters. The horizontal distribution of Antarctic silverfish was mostly undetected in February, and December showed a relatively stronger distribution than that of February. Antarctic silverfish is characterized by their distribution near sea ice.

• 한국수산과학회지
• /
• 제47권5호
• /
• pp.671-681
• /
• 2014

The distribution and abundance of coastal fish species in Asan Bay, Korea, were estimated from hydroacoustic survey and net catches. Acoustic data were collected with 38 and 200 kHz from July to October of 2012, and converted to the nautical area scattering coefficient (NASC, $m^2/mile^2$) for $0.25n{\cdot}mile$ along ten transects. Japanese anchovy Engraulis japonicus was the dominant specie in the net catches. The virtual echogram technique was used to distinguish E. japonicus from other species based on the differences in the mean volume backscattering strength (${\Delta}MVBS$) at 38 and 200 kHz. Engraulis japonicus and other fishes are mainly distributed in the center channel and outer part of Asan Bay. E. japonicus tends to move from inner to outer Asan Bay in summer and fall. From NASC data, the target strength and length-weight function of E. japonicus and other fishes were used to estimate the E. japonicus stock at 24.1-93.3 tons, and other fish at 40.6-88.4 tons from July to October 2012. The estimated anchovy biomass compared well with the cumulative catch weight from stow net catches. The hydroacoustic method offers an approach to understanding spatial/temporal structure and estimating the biomass of fish aggregations in coastal areas.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.36-41
• /
• 2016

Changes in target strength (TS) values of sandfish when sandfish was alive and dead were investigated using ex-situ at 120 kHz. TS values measured by tilt angles with -50~+50 degrees showed ranges from -71.0 to -53.3 dB for live sandfish, -63.1~-46.3 dB for thawed sandfish, and -70.0~-50.4 dB after 24 hours from thawed, respectively. It was shown that while TS values were similar between the case of live and the case of after 24 hours from thawed, mean TS values were higher by approximately 5 dB in the case of immediate thawed sandfish. It was also seen that TS values were similar between the case of thawed sandfish and the case of after 21 hours from live. The results showed that TS values of live sandfish were different from those of frozen sandfish. It implies that when estimating TS of frozen fish, the influx of bubbles and changes of body should be considered.

• 한국수산과학회지
• /
• 제52권6호
• /
• pp.725-734
• /
• 2019

Moon jellyfish Aurelia coerulea are highly abundant off the coast of Tongyeong, Korea. We measured the density of A. coerulea in this area using a scientific echosounder at frequencies of 38 and 120 kHz, and then applied a distorted wave Born approximation (DWBA) model to calculate the target strength of the echosounder at each frequency. Then, we used the frequency difference method to extract jellyfish echo signals and estimate the A. coerulea density. A. coerulea was evenly distributed throughout the water column; the backscattering strength ranged from -75 to -65 dB. In May and August, the A. coerulea densities at survey lines 3 and 4 were estimated at 1.5-1.6 and 0.2-0.9 g/m2, with mean weighted densities of 1.04 and 0.48 g/m2, respectively. In September, the A. coerulea densities estimates in Jaran Bay and Goseong Bay were 0.6-2.1 and 0.1-0.4 g/m2, with mean weighted densities of 1.25 and 0.24 g/m2, respectively.

• 한국자기학회지
• /
• 제11권6호
• /
• pp.272-277
• /
• 2001

FeMr에 의해 교환 바이어스된 synthetic antiferromagnet(CoFe/Ru/CoFe)을 가진 Top Ta/NiFe/CoFe/Cu/CoFe/Ru/CoFe/FeMn/Ta 스핀 밸브 구조를 마그네트론 스퍼터링법에 의해 증착하였다. 이러한 스핀 밸브에서는 자유층, 구속층등의 두께 및 조성이 층간 결합력의 세기를 비롯한 자성특성에 영향을 미치게 된다 후방산란법은 두께 및 조성에 대한 절대정량이 가능하며 비파괴 분석법이라는 장점을 지니고 있으나, 원자번호가 20번 이상인 주기율표상의 인접원소로 이루어진 자성박막을 분석하는데 있어서 신호의 중첩현상으로 인해 분석이 불가능하였다 본 연구에서는 element-specific 한 분석기술인 양성자 여기 X선 검출법과, 절대 정량이 가능하고 깊이분해능을 현저히 향상시킨 grazing-exit 후방산란법 (RBS : Rutherford Backscattering Spectrometry)을 동시에 사용하여 상호 보완적인 분석을 함으로써 스핀밸브에 대한 성분 및 두께에 대한 정량분석을 수행하였다. 이를 위하여 먼저 spin valve 구조에서 자성층인 NiFe, CoFe, FeMn 단일층이 증착된 시료에 대한 표준화를 수행함으로써 spin valve 구조에서 grazing-exit 후방산란 스펙트럼 상의 중첩된 신호를 Simulation을 통하여 분리가 가능하였으며, 특히 Ru층의 두께는 단위의 정확도로 측정이 가능 하였다

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.495-502
• /
• 2005

무전해 도금 용액을 이용하여 구리를 직접 텅스텐(Tungsten, W) 기판 위에 도금하였다. 도금 용액의 농도는 각각 $CuSO_4$ 7.615 g/L, EDTA 10.258 g/L, glyoxylic acid 7 g/L로 하였다. 도금 용액의 pH는 11.0에서 12.8까지 변화시켰으며, 용액의 온도는 $60^{\circ}C$로 유지하였다. 도금된 필름의 특성을 조사하기 위하여 X선 회절분석기, 전계 방출 주사 전자 현미경, 주사형 원자력 현미경, X선 광전자 분석기 및 Rutherford backscattering spectroscope(RBS)를 사용하였다. 구리 도금을 위한 가장 좋은 pH 조건은 11.8이였다. 이 용액에서 10분 동안 도금한 경우 둥근 모양의 구리 입자가 균일하게 도금되었으며, 불순물 peak이 없는 순수 구리 peak이였고, 근평균 제곱 표면 거칠기는 약 11 nm가 되었다. 또한, pH 11.8에서 12분 동안 도금한 필름의 두께는 140 nm이었고 도금속도는 약 12 nm/min였다. 무전해 도금 용액의 pH를 12.8로 증가시키면 도금된 구리 필름은 Cu peak 이외에 불순물 peak인 $Cu_2O$가 나타나고 구리 입자 모양도 기다란 직사각형 모양으로 변하였다. 순수 구리의 도금을 위해서는 도금 용액에서 적당한 pH를 유지하여야 한다. 도금된 구리의 농도는 RBS로 측정한 결과 99 atom％였다. 또한, Cu/W 필름은 전기 도금하는 동안 합금 형태를 이루기 때문에 접착성도 좋았다.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.115-122
• /
• 2006

The bistatic scattering of an incident wave by a hemi-spherically capped cylinder is of particular interest because it has rarely been studied until the present day. The configuration of a hemi-spherically capped cylinder is similar to naval underwater weapons (submarines, mines, torpedos, etc.), but which is not exactly the same. This paper describes a novel laboratory experiment aimed at direct measurement of bistatic scattering by a hemi-spherically capped cylinder. Bistatic scattering by a hemi-spherically capped cylinder was measured in an acoustic water tank (5m long, 5m wide, 5m deep) using a high frequency projector (120kHz) and hydrophone. Measurements of monostatic scattering were also made under the same conditions. The bistatic scattering pattern by a hemi-spherically capped cylinder was measured against the incident angles $(0^{\circ},\;15^{\circ},\;20^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;90^{\circ})$ in order to verify various scattering pattern characteristics by the change of incident angle. The results indicate that the bistatic scattering TS at a wide scattering angle is much stronger than the mono static scattering TS. In bistatic scattering, the forward scattering TS is significantly stronger than the backward scattering TS, and the forward scattering pattern is also broader. In case of seven incident angles, the maximum value of forward scattering TS is about 14dB stronger than that of backward scattering TS. It is also found that forward scattering varies with the incident angle of sound to a much less extent than backscattering, and it is not seriously affected by the incident angle. These features could be the advantages of using forward scattering for detecting underwater targets at long range and increasing detection area and probability.

• 대한전자공학회논문지
• /
• 제3권1호
• /
• pp.18-23
• /
• 1966

동철종으로 부터 후방 산란되는 감마선을 측정하므로써 그의 두께를 수정할 수 있는 두께계의 실용성에 관하여 실험적인 검토를 하였다. 본 두께계의 특징은 선원으로부터 반사되는 1 차방사선과 철판으로 부터 후방 산란되는 2차 방사선을 적시에 동일한 씬티레이숀 검출기로 검출하며 사용되는 선원의 방사선 강도도 20μc 정도로 적으므로 일절의 방사선 차폐물이 불필요하므로 가반형 두께계로서 적당하다. 씬티레이숀 검출기로 부터의 출력 펄스는 프리암프, 메인암프, 및 단채널 파고분석기를 거쳐 후방 산란 감마선만을 선별한 다음 계수률계상에서 두께로 직독하도록 할 수 있다. 광판의 두께 변화에 대한 지시감도를 크게 하기 위한 선원의 위치 파고분석기의 window width, 사용될 선원의 에너지와 강도등의 최적치를 구하기 위한 실험을 행하였다. 이 두께계로서 강철판 또는 파이프의 내벽상의 작은 흠이나 부식처를 용이하게 발견할 수 있다. 실측결과 3∼8mm 두께 범위에서 약 ±3%의 정밀도를 얻었고 20mm 두께에서는 약 ±10%로 저하되었다.