• Earthquakes and Structures
• /
• v.9 no.6
• /
• pp.1273-1290
• /
• 2015

JK wall is a shear wall made of lightweight EPS mortar and reinforced with a 3-D galvanized steel mesh, called JK panel, and truss-like stiffeners, called JK stiffeners. Earlier studies have shown that low strength lightweight concrete has the potential to be used in structural elements. In this study, seismic contribution of the JK infill walls surrounded by steel frames is numerically investigated. Adopting a hybrid numerical model, behavior envelop of the wall is derived from the general purpose finite element software, Abaqus. Obtained backbone would be implemented in the professional analytical software, SAP2000, in which through calibrated hysteretic parameters, cyclic behavior of the JK infill can be simulated. Through comparison with earlier experimental results, it turned out that the proposed hybrid modeling can simulate monotonic and cyclic behavior of JK walls with good accuracy. JK infills have a panel-type configuration which their dominant failure mode would be ductile in flexure. Finally technical and economical advantages of the proposed JK infills are assessed for two representative multistory buildings. It is revealed that JK infills can reduce maximum inter-story drifts as well as residual drifts at the expense of minor increase in the developed base shear.

• Elastomers and Composites
• /
• v.38 no.2
• /
• pp.157-166
• /
• 2003

The Edwards-Vilgis slip-link theory and the Kaliske-Heinrich extended tube theory were tested experimentally using published experimental data on networks of natural and isoprene rubber and on polysiloxane networks. All parameters were adjusted to achieve an optimum fit. The data description obtained with the EV theory is not satisfactory and the parameter values tend to lie outside their reasonably expected range. But for the region of low strains, the Kaliske-Heinrich theory offers a satisfactorily accurate data description which is able to serve for practical purposes. Its crosslink term, however, is based on approximations which lead to a questionable prediction and values determined for the exponent in the entanglement term lie outside the range expected by the KH model. Thus, the title question cannot be given a positive answer. Conclusions published earlier that the trapped entanglements contribute both to the crosslink and constraint (entanglement) term are supported by the present data analysis. Experimental equibiaxial data on hydrocarbon networks do not show any maximum on their stretch ratio dependence, contrary to the predictions of molecular theories. The stretch ratio dependences of relative reduced stresses do not sensitively reflect differences in the chemical nature of the chain backbone (hydrocarbon vs. siloxane) and in the crosslinking method (end-linking vs. random crosslinking).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1043-1046
• /
• 2009

Human protein tyrosine kinase-6 (PTK6) is a member of the non-receptor protein tyrosine kinase family and it is found in two-thirds of all breast tumors. Very recently, we proposed that the SH3 domain of PTK6 interacts with the linker region (Linker) between the SH2 and kinase domains, proving that the interaction between SH3 domain and Linker plays an important role in auto-inhibition mechanism. Residues from 1 to 191 corresponding region of SH3-SH2-Linker (SH32L) of PTK6 was cloned into the pET32a expression vector with Tobbaco etch virus (TEV) protease enzyme site by sequence homology and 3D structural model. The purified PTK6-SH32L was determined as a monomer conformation in solution. The amide proton resonances in the $^{15}N-^{1}H$ 2D-HSQC spectrum suggest that PTK6-SH32L possesses disordered structural region of the flexible/unstructured linker region. In addition, the backbone amide proton chemical shifts of the SH3 domain in the PTK6-SH32L differ from that of the independent domain, indicating that intra-molecular interaction between SH3 and Linker in the PTK6-SH32L is present.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.2
• /
• pp.143-151
• /
• 2005

Information technology(IT) investment evaluation requires measurements from many perspectives. Except for the case of financial performance, these measurements mostly belong to the qualitative or intangible domain. The problem with IT investment evaluation lies in the fact that it is very difficult to define the qualitative properties against which to measure the performances. This paper addresses the issue of developing the set of performance indices, and defining the structural relationships between them, such that the IT investment evaluation can be done in a systematic, objective and comprehensive manner. We introduce the balanced scorecard strategy map as the backbone reference frame for the generation of performance indices and for the description of the relationships between them. Sample indices for evaluating projects from strategic perspectives are provided with a case example. A step by step follow through of the index generation process has been presented along with the case.

• Journal of Ginseng Research
• /
• v.31 no.4
• /
• pp.210-216
• /
• 2007

The backbone structure of ginsenosides, active ingredients of Panax ginseng, is similar with that of sterol, especially cholesterol. Caenorhabditis elegans (c. elegans) is one of free living nematodes and is well-established animal model for biochemical and genetic studies. C. elegans cannot synthesize de novo cholesterol, although cholesterol is essential requirement for its growth and development. In the present study, we investigated the effects of Korean red ginseng total extract (KRGE), ginseng total saponins (GTS) on life span of C. elegans in cholesterol-deprived and -fed medium. Cholesterol deprivation caused damages on life span of worms throughout F1 to F3 generations. KRGE or GTS supplement to cholesterol-deprived medium restored the life span of worms as much as cholesterol alone-fed medium. In study to identify which ginsenosides are responsible for life span restoring effects of KRGE, we found that ginsenoside Rc supplement not only restored life span of worms grown in cholesterol-deprived medium but also prolonged life span of worms grown in cholesterol-fed medium. These results show a possibility that ginsenosides could be utilized by C. elegans as a sterol substitute and further indicate that ginsenoside Rc is the effective component of Korean red ginseng that prolongs the life span of C. elegans.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1401-1406
• /
• 2013

This study tested the feasibility of observing H/D exchange of intact protein by top-down electron capture dissociation (ECD) mass spectrometry for the investigation of protein structure. Ubiquitin is selected as a model system. Local structural information was obtained from the deuteration levels of c and $z^{\cdot}$ ions generated from ECD. Our results showed that ${\alpha}$-helix region has the lowest deuteration level and the C-terminal fraction containing a highly mobile tail has the highest deuteration level, which correlates well with previous X-Ray and HDX/NMR analyses. We studied site-specific H/D exchange kinetics by monitoring H/D exchange rate of several structural motives of ubiquitin. Two hydrogen bonded ${\beta}$-strands showed similar HDX rates. However, the outer ${\beta}$-strand always has higher deuteration level than the inner ${\beta}$-strand. The HDX rate of the turn structure (residues 8-11) is lower than that of ${\beta}$-strands (residues 1-7 and residues 12-17) it connects. Although isotopic distribution gets broader after H/D exchange which results in a limited number of backbone cleavage sites detected, our results demonstrate that this method can provide valuable detailed structural information of proteins. This approach should also be suitable for the structural investigation of other unknown proteins, protein conformational changes, as well as protein-protein interactions and dynamics.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.139-149
• /
• 2016

Service industry can be divided largely into commercial industry, banking industry, insurance industry, advertising industry, and tourism industry. Of these, banking industry is playing an essential role as it constitutes the backbone of economy. Banking industry, which belongs to financial industry, is sensitive to external environment. In this kind of industry, internal dynamics of an organization is very important. The purpose of this research is to find out what kind of influence the relation of internal dynamics perceived by members of Nonghyup organization has on customer orientation via quality of internal service. For the purpose, we have reviewed preceding studies on variables that affect customer orientation and developed a measuring tool in a form that fits banking organizations. Internal service quality, job satisfaction, and organizational immersion which play a mediating role in the model of this research not only turned out to have a significant influence on customer orientation, they also turned out to have the strongest influence. This research has academic significance as it carried out a research with an emphasis on variables that affect customer orientation of members of Nonghyup organization. Regarding practical significance, it was intended to present useful data that can be utilized for an analysis of internal service quality management and capability of human resource management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1778-1797
• /
• 2021

Document image binarization is an important pre-processing step in document analysis and archiving. The state-of-the-art models for document image binarization are variants of encoder-decoder architectures, such as FCN (fully convolutional network) and U-Net. Despite their success, they still suffer from three limitations: (1) reduced feature map resolution due to consecutive strided pooling or convolutions, (2) multiple scales of target objects, and (3) reduced localization accuracy due to the built-in invariance of deep convolutional neural networks (DCNNs). To overcome these three challenges, we propose an improved semantic segmentation model, referred to as DP-LinkNet, which adopts the D-LinkNet architecture as its backbone, with the proposed hybrid dilated convolution (HDC) and spatial pyramid pooling (SPP) modules between the encoder and the decoder. Extensive experiments are conducted on recent document image binarization competition (DIBCO) and handwritten document image binarization competition (H-DIBCO) benchmark datasets. Results show that our proposed DP-LinkNet outperforms other state-of-the-art techniques by a large margin. Our implementation and the pre-trained models are available at https://github.com/beargolden/DP-LinkNet.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.1339-1347
• /
• 2021

Indonesia has a population of more than 260 million, of which, by 2020, Generation Y is predicted to account for 70% of the total. With different birth years, Generation Y is the backbone of Indonesia's product purchasing. Generation Y is interested in establishing strong relationships with specific brands on social media. They are also interested in working with companies to design a product. Most Generation Y utilizes more than one electronic device and they are also brand loyal. Therefore, this study seeks to examine the effect of social media (i.e., e-WOM, online community, and online advertising) on brand image and loyalty in Generation Y in Indonesia. The sampling method employed was purposive sampling. A total of 150 respondents in the age range of 23-30 years were involved as the sample. Using multiple regression model in data analysis, this study proved that e-WOM, not only have a positive and significant effect on the brand image, but also on brand loyalty. Furthermore, online community also positively and significantly affects brand image and brand loyalty. Likewise, online advertising has a positive and significant effect on brand image and brand loyalty. This study's findings indicated that all the proposed hypotheses were well accepted.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.226-240
• /
• 2020

This paper presents an experimental investigation of asymmetric impact effects on hydroelastic responses. A 1:64 scaled segmented ship model with U-shape open cross-section backbone was newly designed to meet elastic similarity conditions of vertical, horizontal and torsional stiffness simultaneously. Different wave heading angles and wavelengths were adopted in regular wave test. In head wave condition, parametric rolling phenomena happened along with asymmetric slamming forces, the relationship between them was disclosed at first time. The impact forces on starboard and port sides showed alternating asymmetric periodic changes. In oblique wave condition, nonlinear springing and whipping responses were found. Since slamming phenomena occurred, high-frequency bending moments became an important part in total bending moments and whipping responses were found in small wavelength. The wavelength and head angle are varied to elucidate the relationship of springing/whipping loads and asymmetric impact. The distributions of peaks of horizontal and torsional loads show highly asymmetric property.