• 한국컴퓨터그래픽스학회논문지
• /
• 제23권5호
• /
• pp.29-38
• /
• 2017

본 논문은 나뭇가지 패턴을 의자의 골격에 임의로 합성하는(Tree-Inspired Chair) 모델링 기법을 제안한다. 여러 개의 입력모델을 합성하는 기존 기법과 다르게, 제안 기법은 하나의 메쉬만 사용하여, 사용자가 원하는 부분의 contour mesh로부터 나무 성장 시뮬레이션으로 생성된 패턴을 갖는 의자 모델링이 가능하다. 우리는 나뭇가지 패턴을 생성시킬 영역 contour mesh를 효율적으로 추출하기 위하여 새로운 기법을 제안한다. 우선, 입력된 모델의 face 면적에 기반한 contour mesh를 생성하고, 그 메쉬의 앞뒷면 정보를 이용하여 연결정보가 복원된 skeleton mesh를 생성한다. 또한, 입력 모델의 형상과 유사하게 나뭇가지 패턴을 생성하기 위해 형상 표면의 tangent vector를 고려하는 3-way 나무성장 시뮬레이션 기법을 제안한다. 제안기법은 기존의 가구 모델을 이용하여 간단한 파라미터의 조작만으로 나뭇가지 형상과 가구 모델의 골격을 결합하는 새로운 형태의 가구 모델링을 보여준다. 우리는 실험을 통하여 제안 기법의 성능과 유효성을 보여주었다.

• 건축역사연구
• /
• 제31권6호
• /
• pp.59-68
• /
• 2022

This paper is an architectural historical study on Chimi of Hwangnyongsa Temple. In this research, the shape and cross-section of the chimi are reviewed. The results of the study are as follows. The chimi is a form in which the head part facing the maru is omitted, and the upper and lower body are separated. The upper and lower bonds are assembled into a two types of joint throughout the side of the torso, and then bound with an iron strap. Because of the absence of ridge line in the front, and the narrow curved surface which makes the side plate close to the plane, the entire cross-section is triangular, and the rear plate maintains the shape of the chimi. The naerimmaru connected to the side of the chimi has a slope, so it is clear that the chimi was used on the woojingak-jibung(hipped-roof), and the wing part and back of the chimi are erected on the side roof. The height of the yongmaru and chunyeomaru is about the same and the roofing tiles of those are in contact. The roofing tiles of chunyemaru should be cut to fit the angle of the contacting part. The maru is 30 stories high of roofing tiles as a result of the on-board survey. Based on reference on the shape and timing of the production of chimi, the height of chimi, and the maru is believed to have been built before the Unified Silla Period and used in buildings with at least seven-kan frontage. Buildings corresponding to these construction conditions can be seen as Central hall and East hall in Hwangnyongsa temple.

• Journal of Radiation Protection and Research
• /
• 제33권4호
• /
• pp.167-172
• /
• 2008

최근 한양대학교에서는 고해상도 연속절단면 컬러해부영상자료를 이용하여 표준한국인 성인남성 체적소 모델 HDRK-Man을 개발하였다. HDRK-Man 은 기존의 다른 모델들과 마찬가지로 누워있는 인체의 영상을 사용하여 제작하였기 때문에 등과 엉덩이 부분이 납작하다는 문제가 있다. 이러한 문제를 해결하기 위하여 본 연구에서는 HDRK-Man 체적소 모델을 변형이 용이한 면(surface) 모델로 변환하였고 전신외형을 보정한 후 외형 보정이 선량 계산에 미치는 영향을 평가하였다. 면 모델로의 변환 작업은 상용 소프트웨어인 $3D-DOCTOR^{TM}$, $Rapidform^{(R)}$2006, $Rhinoceros^{(R)}$4.0을 사용하였고, 전신외형의 보정작업은 $MAYA^{(R)}$8.5을 사용하였다. 면의 형태로 변환된 모델은 곧바로 몬테칼로 선량계산에 사용한 수 없으므로, 다시 체적소 모델로 변환하여 선량계산을 수행하였다. MCNPX 몬테칼로 코드를 이용하여 보정 전후의 유효선량을 계산하여 비교해 본 결과 전체적으로 큰 차이는 없었으며, 예상대로 전 (AP), 좌(LLAT), 우(RLAT) 방향에 비하여 후 (PA)방향에서 상대적으로 가장 큰 차이를 보였다. 본 연구를 통하여 변환된 면(surface) 모델은 방사선 방호 분야에서 활용할 수 있는 다양한 자세를 갖는 변형된 인체모델 개발에 사용될 수 있을 것으로 기대된다.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.37-43
• /
• 1988

The purpose of this study is to compare Jegory with Simii, and to understand the construction of Jegory, assuming that Jegory is related to Simii system. The results obtained are as follows ; 1. Teie-ku-li was the first record among the name of Jegory in literature, was called about A.D. 1408. 2, When Jegory and Simii were cut, front-back width and sleeve length standarded on the width of cloth. 3. The cutting of Jegory disposed to seperate right and left width, to connect front and back width up to the middle term of Chosen Dynasty Period. 4. The sewing order of the Simii was Dungsol-Jindong-Baerae-Sougu. The sewing order of the Jegory in $\ulcorner$ The Book of Chosen sewing$\lrcorner$ was Shoulder-Jindong-Baerae-Sup-Dungsol-Kit and in literature of 1960's it was similar to Simii. 5. The lined clothes in $\ulcorner$The Book of Chosen Sewing$\lrcorner$ was sewn to put the inside in the surface, different from the literature of 1960's. 6. In Chosen Dynasty Period the shape of Simii depended on $\ulcorner$Moon Kong Ka Rye$\lrcorner$, but it was changed to similar to Jegory in the latter term. 7. The empty void in Jegory offers usefulness. It relates to Oriental negativism that yin is more useful than yang.

• 한국지반공학회지:지반
• /
• 제2권3호
• /
• pp.51-66
• /
• 1986

본 연구는 재래식 옹벽의 단점을 보완하여 skin element로써 간단한 L-type concrete block을 사용하고 reinforcing strip재로써 plastic fabric strip를 이용하며, back fill재는 우리 주위에서 흔히 접하는 나강암풍화토를 사용하여 만든 보강벽체를 통하여 몇가지 실험을 한 결과 이들 서반재료의 특성을 발안하여 개발된 이론식에 의하여 결정한 벽체의 보강은 삽입한 strip의 간격, 층수, 뒷채움 재의 입도분포, 다짐상태 및 strip의 인장강맥에 좌우되며 본보강옹벽체는 구조적으로 안정하고 경제적인 시공이 가능함이 확인되었으며 우리나라 특히 강원도와 같은 유간지역에서는 보다 효과적으로 이용될 수 있을 것으로 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권3호
• /
• pp.389-394
• /
• 1993

A study on housing and management of dairy cows was conducted in three villages. All activities of husbandry related to the housing and the condition of the cows were observed and farmers were interviewed using a questionnaire. The main type of housing was a tie stall mostly in the back yard area with a gable or shed type roof. Inside the shed the temperature ranged from 17 to $29^{\circ}C$ and the relative humidity ranged from 62 to 73%. Drainage and manure handling was poor which lead to poor cleanliness of the stables and animal skins. The floor space was mostly wide and the roof level was low (less than 2.5 m). The slope of the floor (1-3%) was sufficient, the roughness of the floor was of medium quality. The shape and size of the feed trough was good with a surface of mostly irregular forms. Concentrate was mixed with water and offered in liquid form in pails made from plastic or from parts of rubber car tires. Hoof length was too long which could lead to unstable position and self injury. It is concluded that the housing conditions of dairy cattle need to be improved in order to improve the condition of the animals and the production performance.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.52-58
• /
• 2014

The development of efficient systems for water quality improvement for water sources such as lakes, dams and reservoirs has become a necessity to provide not only a cleaner and safer water to the urban society, but also to provide a cleaner and safer environment for the aquatic organisms living in lakes, dams and reservoirs. This study concentrates on the outlet design and internal flow analysis of an axial flow pump used in a floating type water treatment system completely powered by renewable energy source. The treatment system is designed to raise water from depths of about 3~5m up to the water surface where it is naturally mixed with air as it is released back to the reservoir. The outlet of a typical axial flow pump is modified to suit the floating type water mixer. The performance of the axial flow pump is studied by investigating the internal flow of the system. Results show that the change in outlet shape does not alter the performance of the original pump at the maximum efficiency point as long as the cross sectional area of inlet is the same as the outlet. The axial pump for floating type water treatment system has good cavitation performance in the whole flow passage.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.21-28
• /
• 2005

For the proper conservation of wooden cultural properties, non-destructive evaluation (NDE) method, which can be used to quantitatively evaluate the internal state of wood members, are needed. In this study, an ultrasonic CT system composed of portable devices was attempted, and the capacity of this system was verified by reconstructing the CT images for two phantoms and two artificially defected specimens. Results from this study showed that the sizes of detected defects were enlarged and the shapes were distorted on the CT images. Also, the positions were shifted somewhat toward the surface of specimen, which is regarded due to the anisotropic property of wood. Compared to the filtered back-projection method, SIRT (simultaneous iterative reconstruction technique) method was determined to be more efficient as the algorithm of image reconstruction for wood. A new ultrasonic CT system is thought to be used as a NDE method for wood. However wood characteristics and wave diffraction within wood made it difficult to accurately evaluate the size, shape and position of defects. To improve the quality of CT image of wood, more research including the relationship between wood and ultrasound is needed, and wood properties should be taken into consideration on the image reconstruction algorithm.

• 한국융합학회논문지
• /
• 제11권3호
• /
• pp.195-200
• /
• 2020

본 연구에서는 8개의 터빈 날개면들이 각각 추진축상에서 45°, 40°, 35°의 각도로 기울어져 있는 Model 1, 2 및 3인 3가지 Model의 유체클러치 터빈 날개 형상에 대한 유동 해석들을 수행하였다. 터빈 날개면이 추진축상에서 각도가 크게 기울어질수록 터빈 날개의 뒷면 이후에서의 흐름에서 Model들 중에서 가장 유동 압력을 크게 받고 있음을 알 수 있다. 반면에 터빈 날개면이 추진축상에서 각도가 작게 기울어질수록 유동 속도가 작게 된다. 터빈 날개면이 추진축상에서 각도가 작게 기울어질수록, 즉 유체의 흐름과 수직에 가까운 날개 형상이 효율적으로 유체클러치에 동력을 연결하고 차단하는데 있어서 적합함을 알 수 있다. 유체클러치 터빈 날개 유형별 유동해석을 적용함으로서 본 논문에서의 연구 결과는 미적인 설계를 적용할 수 있는 융합 연구자료로서 유리하다고 여겨진다.

• 한국의상디자인학회지
• /
• 제20권4호
• /
• pp.117-130
• /
• 2018

As women wear shoes for a long time due to aesthetic elements and working environment, many women experience discomfort and deformation in their feet due to their shoes and the production of comfortable shoes is becoming an important issue. The purpose of this study is to investigate the factors affecting the grip of shoes by foot type, shoe design, and wearing attitude of shoes. Through this, we suggest solutions for foot discomfort due to wearing shoes and help to prevent foot related diseases. The study results are as follows; first, a wide foot, square-type, and high or low arch (hollow foot or flat foot) among foot shapes influenced the fatigue and pain of feet, and big feet over 250mm-long, wide feet, square-type feet, and high-arch feet (hollow foot) had an influence on distortion and side effects. Second, among the characteristics of wearing shoes influencing foot discomfort, the higher the shoe heels were, the narrower the surface covering the feet was (pumps and mule), and the shoes with high front heels and narrow back heel area, the shoe wearer had a higher possibility of experiencing fatigue and pain and even had not only fatigue and pain but also side effects when she wore pointed shoes. Third, a shoe wearer experiences fatigue and pain if she wears shoes for a shorter period of time, stay stood while wearing shoes for a short time, and wears shoes that are bigger or smaller than the actual shoe size. Fourth, fatigue and pain experiencers and distortion and side effects experiencers all responded that they change into other shoes to deal with foot discomfort and that they directly massage their feet.