• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.135-141
• /
• 2008

In this paper, a design method of broadband horn antenna having 3:1 bandwidth and multiple polarization characteristics is proposed. The feeding section of the antenna adopts quadruple-ridged waveguide type for broadband and multiple polarization characteristics of the antenna. By inserting a shorting bar in the cavity structure with a semi-sphere type back short, the return loss at the feeding section was minimized. A corrugated dielectric lens is designed for phase compensation and lens-surface matching at the antenna aperture, which improves the antenna beam pattern. The validity of the design method is verified by indicating the measured data of the antenna.

• Journal of radiological science and technology
• /
• v.24 no.1
• /
• pp.49-53
• /
• 2001

A number of radionuclides of interest in nuclear medicine are short lived isotopes that emit only gamma ray. The most of all Dept. of Nuclear Medicine in the hospt. are using the $^{99}Mo-^{99m}Tc$ generator for elution of the short lived isotope $^{99m}TcO_4$. A $^{99}Mo-^{99m}Tc$ generator consists of an alumina column on which $^{99}Mo$ is bound. The parent isotope($^{99}Mo$ : half life 67 hr.) decays to its daughter $^{99m}TcO_4^-$ which is a different element with a shorter half-life. $^{99}Mo$ emitted 41-keV(1.3%), 141-keV(5.6%) 181-keV(6.6%) and 366-keV(1.5%) gamma rays. But $^{99m}TcO_4$ emitted only 140-keV gamma ray. We study about the gamma ray distribution around the $^{99}Mo$ generator. And obtained the result as follows ; 1. Total counted gamma ray from generator smaller in front side than back. 2. The gamma ray emitted from $^{99}Mo$ generator without $^{99m}TcO_4$ vial increased in the back side(Mo column posited side) 3. The gamma ray only from the $^{99m}TcO_4$ vial increased in the front side. 4. Apron can protect gamma ray above 60% of total radiation from the $^{99}Mo$ generator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.77-82
• /
• 2019

In this paper, a 0.6~6GHz quad-ridge horn antenna which can be used for the antenna measurement of 5.8GHz WiFi system from lowest frequency band of mobile LTE (Long Term Evolution) is designed and implemented. The quad-ridge horn antenna has quadruple ridges of exponential function, a back-short and a cavity. Based on this structure, we design the cavity size, ridge gap and feed gap to have broadband characteristics. For implementation, the plates material of aluminum and copper are used for the horn and four ridges, respectively. And the insulator supports are used to maintain the gap between ridges. By measurement, antenna has the gain of 6.2~13.35dBi with the return loss of less than -6dB (under VSWR 3 : 1) in the entire design band. The results of this study can be widely used to the antenna studies on the mobile communication including low frequency band of LTE, the EMI measurement and the standard calibration measurement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.254-255
• /
• 2017

The aim of this study is to investigate the impact resistant performance of steel short fiber-reinforced cement based composites (SFRCCs) containing 1.0, 1.5, 2.0 and 3.0% volume fraction of steel short fibers subjected to high velocity impact of steel projectile (the diameter of 19.05mm and the mass of 28.13g). The gunpowder impact facility was used for impact tests, and the impact velocity was from about 350 to 700m/s. The specimens were damaged in various failure modes, which are penetration, scabbing, and perforation. Comparing with Plain specimen, SFRCCs have superior capacity on the scabbing limit, and slightly bulged in the back side under the impact velocity of 700m/s. In addition, the impact resistant performance of SFRCCs improved with increase of steel short fiber volume ratio. The fibers play an important role in controlling the local damage of SFRCCs.

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.512-522
• /
• 2015

The aim of this study was to investigate the change in women's somatotype with aging. The subjects were 1,123 women aged 40~69. Their anthropometric data were from the 6th Size Korea. The data were analyzed by factor analysis and cluster analysis. Seven factors were extracted: body mass, body length, back shoulder, arm length factor, front interscye factor, body rise factor, and shoulder angle. The upper body types of middle-aged and elderly women were classified into five types: skinny, short stout body type with forward posture, composite, tall & full body type, and short & skinny. The skinny and composite body type appeared more often than the short stout body type in the early 40s of Korean women. Starting in the mid-50s, composite body type was less often found. However, the number of women with short stout body type increased. In the 60s, the number of women with short stout and tall & full body types decreased. These results reveal that the body types of middle-aged and elderly women changed with some pattern with aging. And women in their early 40s, mid-50s, and 60s women had different body shapes and postures.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1262-1266
• /
• 2000

Objective : Flat back syndrome constitutes a syndrome complex characterized by the loss of normal lumbar lordosis. Various techniques of correction for flat back syndrome have been reported. Posterior extension osteotomy has certain drawbacks. Forceful hyperextension of the spine may result in vascular complications such as rupture of the aorta or the inferior vena cava and stretching of superior mesenteric artery, and pseudoarthrosis. We describe a rationale and technique of transvertebral posterior extension osteotomy to avoid complications of posterior extension osteotomy and to achieve an correction of 30 degrees of flat back syndrome. Method : A 63-year-old woman with degenerative lumbar kyphosis presented with low back pain, thigh pain, knee pain and walking difficulty. Transpedicular fixation from L1 vertebra to S1 vertebra was accomplished for lumbar degenerative kyphosis. After 6 months, the patient presented with flat back syndrome. A second operation was performed with transvertebral posterior extension osteotomy. Result : With short segemental fusion, early bone fusion and correction of 30 degrees were achieved. Conclusion : Transvertebral posterior extension osteotomy provide an 30-60 degrees of correction of flat back syndrome. This technique is considered to be good method for the revision of lumbar degenerative kyphosis.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.38-42
• /
• 2018

Continuous efforts are being made to improve the efficiency of Si solar cells, which is the prevailing technology at this time. As opposed to the standard front-lit solar cell design, the back-lit design suffers no shading loss because all the metal electrodes are placed on one side close to the pn junction, which is referred to as the front side, and the incoming light enters the denuded back side. In this study, a systematic comparison between the two designs was conducted by means of computer simulation. Medici, a two-dimensional semiconductor device simulation tool, was utilized for this purpose. The $0.6{\mu}m$ wavelength, the peak value for the AM-1.5 illumination, was chosen for the incident photons, and the minority-carrier recombination lifetime (${\tau}$), a key indicator of the Si substrate quality, was the main variable in the simulation on a p-type $150{\mu}m$ thick Si substrate. Qualitatively, minority-carrier recombination affected the short circuit current (Isc) but not the opencircuit voltage (Voc). The latter was most affected by series resistance associated with the electrode locations. Quantitatively, when ${\tau}{\leq}500{\mu}s$, the simulation yielded the solar cell power outputs of $20.7mW{\cdot}cm^{-2}$ and $18.6mW{\cdot}cm^{-2}$, respectively, for the front-lit and back-lit cells, a reasonable 10 % difference. However, when ${\tau}$ < $500{\mu}s$, the difference was 20 % or more, making the back-lit design less than competitive. We concluded that the back-lit design, despite its inherent benefits, is not suitable for a broad range of Si solar cells but may only be applicable in the high-end cells where float-zone (FZ) or magnetic Czochralski (MCZ) Si crystals of the highest quality are used as the substrate.

• The Korean Journal of Pain
• /
• v.20 no.1
• /
• pp.54-59
• /
• 2007

Background: Selective transforaminal epidural block (STEB) has showen effectiveness as a diagnostic and therapeutic option for the management of patients with low back pain or sciatica. This study was carried out in order to determine the short-term effects and prognostic factors associated with STEB in patients with low back pain or sciatica. Methods: Ninety-seven patients were selectedfor participation in this study. Their diagnosis were based werewason the clinical symptoms and MRI findings. We performed STEB under fluoroscopic guidance and injected 3 ml of radio opaque dye in order to confirm the technical success of the procedure. We then injected 20 mg of triamcinolone mixed into 3 ml of 0.5% mepivacaine. One month later, we classified the patient outcomes as excellent, good, moderate or poor, according to the degree of reduction in VAS score from baseline. The independent variables assessed included symptom duration, block level, number of blocks, primary diagnosis, prior caudal block, anterior epidural space filling of dye, medication history, demographic data, radiating pain, back surgery and spondylolisthesis. Results: At a mean follow-up period of 1 month after STEB, excellent results were noted in the patients diagnosed with herniated lumbar disc (70%), non-specific spondylosis (54%), spinal stenosis (44%), and failed back syndrome (28%). The patients with epidural adhesion and combined spondylolisthesis were associated with poorer outcomes. Combined caudal block, symptom duration and the extent of epidural spread of the drug were not related to the effectiveness of the treatment. Conclusions: Selective transforaminal epidural block is effective in treating patients with radiculopathy, such as herniated lumbar disc, but it isrelatively ineffective in treating patients with structural deformities, such as failed back syndrome and spondylolisthesis.

• New & Renewable Energy
• /
• v.4 no.2
• /
• pp.74-80
• /
• 2008

To improve the blue responses of screen-printed single crystalline silicon solar cells, we investigated an emitter etch-back technique to obtain high emitter sheet resistances, where the defective dead layer on the emitter surface was etched and became thinner as the etch-back time increased, resulting in the monotonous increase of short circuit current and open circuit voltage. We found that an optimal etch-back time should be determined to achieve the maximal performance enhancement because of fill factor decrease due to a series resistance increment mainly affected by contact and lateral resistance in this case. To elucidate the reason for the fill factor decrease, we studied the resistance analysis by potential mapping to determine the contact and the lateral series resistance. As a result, we found that the fill factor decrease was attributed to the relatively fast increase of contact resistance due to the dead layer thinning down with the lowest contact resistivity when the emitter was contacted with screen-printed silver electrode.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.305-309
• /
• 2009

The effect of light scattering layers (400 nm, TiO$_2$ particle) of 4 $\mu$m thickness on the dye-sensitized solar cell has been investigated with a 12 $\mu$m thickness of photo-anode (20 nm, TiO$_2$ particle). Two different structures of scattering layers (separated and back) were applied to investigate the light transmitting behaviors and solar cell properties. The light transmittance and cell efficiency significantly improved with inserting scattering layers. The back scattering layer structure had more effective transmitting behavior, but separated scattering layer (center: 2 $\mu$m, back: 2 $\mu$m) structure (9.83% of efficiency) showing higher efficiency (0.6%), short circuit current density (0.26 mA/cm$^2$) and fill factor (0.02). The inserting separating two scattering layers improved the light harvesting, and relatively thin back scattering layer (2 $\mu$m of thickness) minimized interruption of ion diffusion in liquid electrolyte.