• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.468-476
• /
• 2001

The ROK TRANSCOM is trying to establish a concrete wartime sealift operation plan. But there are many problems to be solved for setting up the plan. The most serious problem is to procure war materiel to be shipped in U.S.A and next one is to determine the number of sealift assets and to allocate them. The process of sealift operation can be described as follows. Before the order of vessel mobilization, all vessels appointed for activation would be scattered in worldwide in the state of Beaded or unloaded. After the order of vessel mobilization, vessels would go to SPGE(seaport of embarkation) to load war materiel. Some loaded ships should offload the commercial cargo to the near port as soon as they are activated, before they would go to SPOE. All vessels would load procured materiel in SPOE and then go to SPOD(seaport of debarkation). They would offload war materiel in SPOD and then go back to SPOE to load war materiel again. We will simulate this process using ARENA(1), evaluate the sealift capability of ROK and find omit problems of the sealift plan. This model ultimately evaluates the sealift capability and provides planners with critical information far establishing and correcting the plan. This study can also provide military planners with a flexible and accessible decision support tool to provide advance planning under a variety of conditions on the sealift capability. The military planner is expected to make use of this model as a standard for establishing effective and concrete sealift operation in the near future. We can conclude how procurement capability significantly affects the result of sealift operation through this model. We could decide the appropriate levee of sealift asset such as the number of vessels and the number of available berth. So we could allocate effectively the resources for completing the sealift operation within the TGT(Target) time.

• Journal of Acupuncture Research
• /
• v.37 no.4
• /
• pp.281-284
• /
• 2020

Filum terminale lipoma is an inherited lumbosacral abnormality that can cause tethered cord syndrome. This report describes an unusual case of lumbago and sciatica, pain suspected to be caused by a filum terminale lipoma where a herniated intervertebral disc had occurred. The patient was hospitalized for 43 days and received integrative Korean medicine treatment, including acupuncture, pharmacopuncture, Chuna therapy, cupping therapy, physiotherapy and herbal medicine. Treatment effectiveness was assessed using the numerical rating scale, Oswestry Disability Index, European Quality of Life 5-Dimensions, and patient symptoms. After inpatient treatment, the pain the patient suffered was significantly reduced, and the evaluation indices scores reflected this. Integrative Korean remedies may be an effective option for lower back pain and lower extremity symptoms which are caused by filum terminale lipoma where a herniated intervertebral disc has occurred. Additional clinical research is required to support this observation.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.95-101
• /
• 2014

In this study, we look at the current state of the inheritance system of family business in korea, you are trying to present a remedy for the activation of family business succession. The family business inheritance tax assistance benefits at the time, it is necessary to define the effect that offers the advantage of tax support to reflect correctly, the scope of its application subject property, easy to match the requirements of the family business succession is family business succession Small Business issue of effectiveness of the system has not emerged, there is a need to strengthen the requirements of family business succession that takes into account the reality of small and medium-sized enterprises. In addition, if you provide the inheritance tax deduction for the inheritance of the family business, only to inherit the family business of a substantial tax advantages help to move back, the provisions of the post-management is necessary.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.361-368
• /
• 2004

This paper proposes an interactive VOD system to serve truly interactive VCR services using multicast delivery, client buffer and web-caching technique which implements the distributed proxy in Head-End- Network(HNET). This technique adopts some caches in the HNET that consists of a Switching Agent(SA), some Head-End-Nodes(HEN) and many clients. In this model, HENs distributively store the requested video under the control of SA. Also, client buffer dynamically expands to support various VCR playback rate. Thus, interactive services are offered with transmitting video streams from network, HENs and stored streams on buffer. Therefore this technique makes the load of network occur In the limited area, minimizes the additional channel allocation from server and restricts the transmission of duplicated video contents

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.145-152
• /
• 2013

Objective: The aim of this study is to develop an ergonomic office chair that has an alarm function for the unbalanced sitting postures. Background: Contrary to expectation, it is reported that office workers sit on their chairs much more in unbalanced postures during daily work. Even though an office worker uses an ergonomically good-designed chair and begins their work in a good sitting posture, his/her posture is likely to shift to the unbalanced bad posture. Therefore, a posture alarm system would be very helpful in keeping office workers' good postures. Method: We developed a prototype chair with four load cells under a seat pan and one load cell beneath a backrest. Through some experiments, we set the criteria for unbalanced bad postures then implemented the criteria into the alarm system of the prototype chair. The chair called e-BASE chair could detect unbalance postures and show alarms for chair users. We also enhanced back support by developing a step-wised folding backrest. Results: The e-BASE chair showed better performance in interface pressure distributions and balanced posture ratio in VDT work. Conclusion: The ergonomic chair with posture alarm function(e-BASE chair) was developed. It showed better performance in seat pressure distribution and in keeping good posture during office work. Application: The posture alarm system and folding backrest can be applied to the new models of office chair.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.3 no.2
• /
• pp.104-115
• /
• 2008

Purpose: A study of the family planning and Maternal-Child Health Services that disciplined itself in primary health care post form 1980 to 2009. Method: Investigation studies family planning in primary health care post and a change process of a Maternal-Child Health Services into case by case until 2009 from 1980. Results: Our country family planning business began at economic development dimensions in order to solve a poverty issue. This business goal were childbirth decrease of pregnancy possibility couple aged 19~49 and improve to mother and child health. For this goal, all kinds of health education included sex education and contraception education, contraception service, comprehensive maternal and child health service that management of front and back of childbirth etc. are provided. According to fail down a birthrate from 6.0(1962) to 1.25(2009), the nation reached to a dilemma called childbirth encouragement policy. Conclusions: Decrease of labor supply by low birthrate, decrease numerical an employed person by aging was brought a labor shortage and decrease of productivity of labor of industrial manpower. Deterioration phenomenon of financial income and expenditure by consumption and investment contraction caused decrease of slowdown of economic growth and potential growth rate, and a social cost burden is increased by deterioration financial old man support burden increase by this and pensions and health insurance, a sharp increase of social welfare cost etc. Now, in order to solve a low birth issue, the government establishes a whole nation forwarding system and establishes basic plan social low birth and advanced age, and to prepare for childbirth fault factors removal and advanced age society shall endeavor.

• Physical Therapy Korea
• /
• v.19 no.1
• /
• pp.19-27
• /
• 2012

The purpose of this study was to determine the effect of contralateral hip adduction (CHA) on thickness of lumbar stabilizers during hip abduction in side-lying. Twenty healthy subjects without back pain were recruited for this study. The thickness of transverse abdominis (TrA), internal oblique (IO) and quadratus lumborum (QL) were measured by ultrasonography. Pelvic lateral tilting motion was measured using a three-dimensional motion analysis system. Measurements were performed at rest position (RP), $35^{\circ}$preferred hip abduction (PHA) and $35^{\circ}$abduction with $10^{\circ}$contralateral hip adduction (CHA) in side-lying at the end of expiration. During the measurements, subjects were asked to maintain steady trunk alignment without hand support. Thickness of TrA and IO was significantly greater in CHA than in PHA and RP conditions. There was no significant difference in thickness of TrA and IO between PHA and RP conditions. Medio-lateral (M-L) thickness of QL was not significant between PHA and CHA conditions. Anterio-posterior (A-P) thickness of QL in PHA and CHA significantly decreased compared to RP condition. Angle of pelvic lateral tilting was significantly decreased in CHA compared to PHA condition. In conclusion, CHA can be recommended for increasing trunk stability without compensatory pelvic motion during hip abduction exercise in side-lying.

• Journal of the Korean Society of Costume
• /
• v.63 no.2
• /
• pp.98-109
• /
• 2013

This study aims to discuss the image making of K-pop girl groups to provide an outlook on the necessary fashion components in order to express certain concepts by analyzing the fashion styles. The fashion styles of the representative girl groups from 2007 to 2011 were classified into five types: retro style, schoolgirl style, chic style, sporty style and marine style. The following are the features and elements of image making by style. The retro style pursued going back to the past. It used stripes, dots, leopard patterns, spangles and denim. It reproduced the style of the past to the trendy style using big sunglasses, retro makeup, girlish hair and gold wigs. The schoolgirl style created the sexy or cute image by using school uniforms as the motif including shirts, short pants and knee socks. It included having natural makeup and straight hair and differentiated colors, patterns and designs. The chic style was classified into rock chic look and sexy look. Both looks had common elements including smoky pop active makeup while the fashion concepts and hair styles were different. The sporty style took the concept of cheer girls. It used plaid shirts, baseball jackets, short pants, thigh high boots, vivid hair accessories, romantic makeup and straight, wave hair. The marine style took the naval uniform as the motif. It expressed the image using short pants, stripe patterns, wappens, naval caps and smoky sexy makeup, straight hair. K-pop girl group fashion is the driving force for the growth of Korean fashion industry as well as its cultural trends and hope that it have a growing influence on the global market and trend through continuing research and support.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.881-894
• /
• 2015

The silver generation have clothing style of optimal daily life comparing than young generation because they do not participate a specific sport event but daily- life exercise. As the human body ages, the figure of the silver generation shows different body shape because upper body changes to curved figure including the belly and waist part. Therefore, clothing characteristics for the silver generation should be considered with proper function, design and textiles to optimize body movement. This study investigated various exercise types according to motion analysis of the silver generation in order to develop the design of the active T-shirts reflecting the structural properties and providing the optimum exercise circumstance. The results to consider design needs are as followed; As the T-shirts design for the flexible exercise which required frequent movement of upper body such as bending and waist twisting during body stretching, a stretch fabric applied to the waist part considering T-shirts allowance and length to make extreme elongation and support for well-fitting appearance of the T-shirts. As the T-shirts design for the instantaneous reactionary exercise, high elastic four-way stretch fabric is applied to the part of arm hole to optimize skeletal and muscle movement for entire body and arm work. As the T-shirts design for the endurance exercise such as climbing, cycling, and walking, the shoulder line of the back part has cutting line allowance to make optimum movement of the upper body but no change of the waist part.