• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.56-63
• /
• 1996

A number of thermotropic liquid crystalline polyurethanes with mesogenic unit were synthesized by polyaddition of a para-type diisocyanate such as 1, 4-phenylene diisocyanate(1,4-PDI) with 4, 4'-bis($\omega$-hydorxyalkoxy) biphenyls($BP{m}$) in DMF. The thermal and liquid crystab line properties were examined by differential scanning calorimetry(DSC), polarized optical microscopy, and wide-angle X-ray scattering(WAXS). Intrinsic viscosities of the polymers exbibited two endothermic peaks correspondinding to phase transitions of melting and isotropization. For example, polyurethane(1,4-PDI/($BP{11}$) ) was found to display a liquid crystalline phase between 177 to 205$^{\circ}C$. In order to know how the hydrogen bonding interaction affects the formation of mesophases in polyurethane 1, 4-PDI/($BP{8}$) / thermal processing FT-IR measurements were carried out. It was found that the stretches regarded as shift to higher frequency region with increasing temperature which showed grdually their liquid crystalline phase

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.93-98
• /
• 2002

The effect of bonding misfit on single crystallization of transient liquid phase (TLP) bonded joints of single crystal superalloy CMSX-2 was investigated using MBF-80 insert metal. The bonding misfit was defined by (100) twist angle (rotating angle) at bonded interface. TLP bonding of specimens was carried out at 1523K for 1.8ks in vacuum. The post-bond heat treatment consisted of the solution and sequential two step aging treatment was conducted in the Ar atmosphere. The crystallographic orientation analysis across the TLP bonded joints was conducted three dimensionally using the electron back scattering pattern (EBSP) method. EBSP analyses f3r the bonded and post bonded heat treated specimens were conducted. All bonded joints had misorientation centering around the bonded interface for as-bonded and post-bond heat treated specimens with rotating angle. The average misorientation angle between both solid phases in bonded interlayer was almost identical to the rotating angle at bonded interface. HRTEM observation revealed that the atom arrangement of both solid phases in bonded interlayer was quite different across the bonded interface. It followed that grain boundary was formed in bonded interface. It was confirmed that epitaxial growth of the solid phase occurred from the base metal substrates during TLP bonding and single crystallization could not be achieved in joints with rotating angle.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.378-391
• /
• 1999

When the time-harmonic plane wave is incident upon a high-contrast spherical cavity in a lossy medium, the incoherent shadow intensity pattern is acquired by averaging out the multi-frequency intensities of the co-polarized total electric field calculated at the measurement plane perpendicular to the propagating direction of the incident wave in the forward direction. In the spherical rotational measurement configuration, an incoherent imaging of the spherical cavity is obtained via the back-projections of the incoherent shadow intensity pattern. This imaging method is validated by imaging an air sphere in the lossy medium of ${\epsilon}_r$ = 2 and $\sigma$ = 0.001, 0.003 S/m and the conditions for obtaining better images are investigated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.90-99
• /
• 2007

We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.143-150
• /
• 2018

Oil-in-water emulsion was prepared using cinnamoyl surfactants as emulsifiers. Cinnamoyl surfactants used in the present study were polyoxyethylene (20) sorbitan monolaurate-cinnamic acid conjugate (TW20CA), polyoxyethylene (20) cetyl ether-cinnamic acid conjugate (CE20CA), and polyoxyethylene(20) oleyl ether-cinnamic acid conjugate (OE20CA). The emulsion stabilized with TW20CA was the most stable, possibly because the polyoxyethylene segment of TW20CA would sterically stabilize the oil droplets effectively. In vivo UV protecting efficacy of surfactant and emulsion was investigated by determining the minimum amount of UV light (MAUL) to induce a black point on the back of hairless mice (HRM2). The mean MAUL of PARSOL, OE20CA, and emulsion stabilized with TW20CA was $1046.5mJ/cm^2$, $1163mJ/cm^2$, and $1308.5mJ/cm^2$, respectively. The high UV-protecting efficacy of the emulsion could be ascribed to not only the UV-absorbing property of cinnamoyl group but also the UV-scattering property of the oil droplets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1C
• /
• pp.59-66
• /
• 2007

This paper proposes a windowing method to reduce noise effect and bit synchronization error caused by tolerance of a tag-response signal for ISO/IEC 18000-6 type-B readers. A tag response signal has very weak power because of a back-scattering modulation scheme and thus may be sensitive to noise. In addition, bit tolerance admitted in a tag response signal requires robust timing synchronization because it affects readers' detection performance. To reduce the two undesirable effects in a tag signal, we acquire bit transition position by using variable windows from over-sampled data, and average whole data in one bit duration. With a hardware system adopting the proposed method, we tested and verified its performance.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.34-38
• /
• 2016

In this paper, a transversely isotropic behavior of AZ31 Mg alloy produced by equal-channel angular pressing (ECAP) process was investigated through tensile test and microstructure observation. The effects of initial ECAP pass number on the anisotropic behavior and mechanical properties of the Mg alloy are evaluated after conventional direct extrusion test, which are carried out at a temperature of $200^{\circ}C$. As a result of the tensile test in three directions ($0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ to the extrusion direction of the sheet) at room temperature, elongation of as-extruded AZ31 alloy(ECAP for 0 pass) showed an unusual anisotropic behavior depending on the extrusion direction although the yield strength and tensile strength are similar to the ECAPed AZ31 alloy. After ECAP for 4 passes at $200^{\circ}C$, microstructural observations of ECAPed magnesium alloy showed a significant grain refinement, which is leading to an equiaxed grain structure with average size of $2.5{\mu}m$. The microstructures of the extruded billet are observed by the use of an electron back-scattering diffraction (EBSD) technique to evaluate of the influence on the grain refinement during extrusion process and re-crystallization mechanism of AZ31 Mg alloy.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.107-117
• /
• 1998

Epitaxial undoped and Sb-doped si films have been grown on Si(001) substrates at temperatures T between 80 and 750$^{\circ}C$ using energetic Si in ultra-high-vacuum Kr+-ion-beam sputter deposition(IBSD). Critical epitaxial thicknesses te, The average thickness of epitaxial layers, in undoped films were found to range from 8nm at Ts=80$^{\circ}C$ to > 1.2 ${\mu}$m at Ts=300$^{\circ}C$ while Sb incorporation probabilities $\sigma$sb varied from unity at Ts 550$^{\circ}C$ to 0.1 at 750$^{\circ}C$. These te and $\sigma$Sb values are approximately one and one-to-three orders of magnitude, respectively, higher than reported results achieved with molecular-beam epitaxy. Plan-view and cross-sectional transmission electron microscopy, high-resolution x-ray diffraction, channeling and axial angular-yield profiles by Rutherford back scattering spectroscopy for epitaxial Si1-x Gex(001) alloy films (0.15$\leq$x$\leq$0.30) demonstrated that the films are of extremely high crystalline quality. critical layer thicknesses hc the film thickness where strain relaxation starts, I these alloys wre found to increase rapidly with decreasing growth temperature. For Si0.70 Ge0.30, hc ranged from 35nm at Ts=550$^{\circ}C$ to 650nm at 350$^{\circ}C$ compared to an equilibrium value of 8nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.195-195
• /
• 2010

$Ga_2O_3$ thin films have been grown on Si(001) substrates by metalorganic chemical vapor deposition (MOCVD) using dimethylgallium isopropoxide ($Me_2GaO^iPr$, DMGIP) with oxygen as the reactant gas. Suitability of the precursor for CVD was confirmed by thermogravimetric analysis (TGA) and vapor pressure measurement. Deposition was carried out in the substrate temperature range $450-650^{\circ}C$. Spectroscopic ellipsometry, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) and Rutherford back-scattering spectroscopy (RBS) were used to determine the thickness, crystallinity, and composition and stoichiometry of the films, respectively. From the slope of the Arrhenius plot in the temperature range $500-550^{\circ}C$, the activation energy of deposition was found to be $225.5\;kJ\;mol^{-1}$. As-deposited films were amorphous, but the monoclinic $\beta-Ga_2O_3$ phase was revealed after annealing the films in air at $1050^{\circ}C$. The XPS and RBS analyses indicate that the $Ga_2O_3$ films obtained by using DMGIP were found to be almost stoichiometric.

• Communications of the Korean Mathematical Society
• /
• v.16 no.3
• /
• pp.445-458
• /
• 2001

The shape and the distribution of material construction of the scatterer may be obtained from its scattered fields by the iterative inversion in the spectral domain. The illposedness, the resolution, and the uniqueness of the inversion are the key problems in the inversion and inter-related. The illposedness is shown to be caused by the evanescent modes which carries and amplifies exponentially the measurement errors in the back-propagation of the measured scattered fields. By filtering out all the evanescent modes in the cost functional defined as the squared difference between the measured and the calculated spatial spectrum of the scattered fields from the iteratively chosen medium parameters of the scatterer, one may regularize the illposedness of the inversion in the expense of the resolution. There exist many local minima of the cost functional for the inversion of the large and the high-contrast scatterer and the hybrid algorithm combining the genetic algorithm and the Levenberg-Marquardt algorithm is shown to find efficiently its global minimum. The resolution of reconstruction obtained by keeping all the propating modes and filtering out the evanescent modes for the regularization becomes 0.5 wavelength. The super resolution may be obtained by keeping the evanescent modes when the measurement error and instance, respectively, are small and near.