• 한국재료학회지
• /
• 제22권3호
• /
• pp.123-129
• /
• 2012

The microstructures and mechanical properties of friction stir welded lap joints of Inconel 600 and SS 400 were evaluated; friction stir welding was carried out at a tool rotation speed of 200 rpm and welding speed of 100 mm/min. Electron back-scattering diffraction and transmission electron microscopy were introduced to analyze the grain boundary characteristics and the precipitates, respectively. Application of friction stir welding was notably effective at reducing the grain size of the stir zone. As a result, the reduced average grain size of Inconel 600 ranged from $20{\mu}m$ in the base material to $8.5{\mu}m$ in the stir zone. The joint interface between Inconel 600 and SS 400 showed a sound weld without voids and cracks, and MC carbides with a size of around 50 nm were partially formed at the Inconel 600 area of lap joint interface. However, the intermetallic compounds that lead to mechanical property degradation of the welds were not formed at the joint interface. Also, a hook, along the Inconel 600 alloy from SS 400, was formed at the advancing side, which directly brought about an increase in the peel strength. In this study, we systematically discussed the evolution of microstructures and mechanical properties of the friction stir lap joint between Inconel 600 and SS 400.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.73-76
• /
• 2009

The optical structure of edge-lit LED backlight has been optimized via simulation study in order to remove bright spots appearing on the entrance region of the light guide plate (LGP) and thus to improve the luminance uniformity. The density of scattering dots located on the back surface of LGP was adjusted according to the location of LED's. In addition, lenticular lenses or a diffuse transmissive surface were formed on the side surface of LGP facing the LED's, and the density of lenticular lenses was optimized for redistributing rays emitted from LED's into wider angles. The bright spots which could be seen from conventional LED backlight were removed by the combination of these two optical structures. The application of diffuse surface to the entrance face gave better uniformity than the application of lenticular lenses. However, dark regions still appear on the entrance region of LGP, which should be removed by more appropriate optical design for achieving better luminance uniformity on the LED backlight.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.224-227
• /
• 1999

A high power deep-water sonar transducer of FFR (Free Flooded Ring) type has been designed using a coupled FE-BEM. The present sonar transducer is composed of rectangular piezoelectric ceramics and pie-shaped steels (or the advantage of simple fabrication. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Different results are available such as steady-state frequency response for TX and RX displacement modes, directivity patterns, back-scattering patterns, bandwidths, transmitting voltage responses and receiving sensitivity responses. The TV response shows a very high acoustic pressure of 150 dB/lV (ref $1{\mu}Pa$ at 1m) at 1900 Hz. This ultra high power response of the sonar transducer indicates a new possibility of the sonar transducer development.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.218-223
• /
• 1999

A piezoelectric flextentional deep-water sonar transducer has been simulated using a coupled FE-BEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with extern리 electrical excitation conditions as well as external acoustic pressure loading conditions. Different results are available such as steady-state frequency response for RX and TX, displacement modes, directivity patterns, back-scattering patterns, resonant frequencies, bandwidths, quality factors, transmitting voltage (TV) responses, input receiving sensitivity (RS) responses. White the present barrel-stave typed sonar transducer of the piezoelectric material is being simulated, the external surface of the transducer is modified in order to allow the same water pressure to be applied to the inner and the outer surfaces of the transducer. With this modification for deep-water application, the resonance frequency of the modified flextentional sonar transducer becomes much lower than that of the unmodified flextentional sonar transducer. The results of the present sonar transducer modelling are also compared with those of a commercial package such as ATILA.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.9-14
• /
• 2014

Performance of DI diesel engine with high-pressure fuel injection equipment is directly related to its emission characteristics and fuel consumption. So, the electro-hydraulic injector for the common-rail injection system should be designed to meet the precise high fuel delivery control capability. Currently, most high pressure injector in use has a needle driven by the solenoid coil energy or the piezo actuator controlled by charge-discharge of output pulse current. In this study, macroscopic spray approaching method was applied under constant volume chamber to research the performance of three different injectors : solenoid, indirect-acting piezo and direct-acting piezo type for CR direct-injection. LED back illumination for Mie scattering was applied on the liquid spray visible of direct-acting piezo injector, including hydraulic-servo type solenoid and piezo-driven injectors. As main results, we found that a direct-acting piezo injector had better a spray tip penetration than hydraulic-servo injectors in spray visualization.

• 대한전자공학회논문지
• /
• 제4권2호
• /
• pp.3-15
• /
• 1967

감마선 후방산란을 이용한 철관 두께 측정용 측후계의 설계의 있어서 1/2인치 이하의 얇은 NaI 크리스털을 사용함으로써 계측부에 있어서 1개의 파고선별회로와 Anti-coincidence Circuit를 제거할 수 있다. 이 방식은 종래의 방식에 비하여 훨씬 회로가 경제적이면서도 거의 비슷한 정밀도와 안정도를 유지할 수 있다. 본논문에서는 위와 같은 새로운 방식에 의하여 설계, 시작된 측정기로서 지금까지 타연구자에 의하여 시도되지 않았던 200℃의 고온파이프의 관순측정실험을 행하였던바 상온에서의 측정치보다 불과 5%이내의 변화밖에 가져오지 않음을 실험적으로 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제5권1호
• /
• pp.15-19
• /
• 1982

Authors made an experiment to know the relation of surface doses and multiple factors of exposure by using grids, fields, tube voltages objects and distances and obtained the results as follows: 1. Surface doses were increased in proportion to the thickness of objects. 2. Surface doses were more influenced when irradiated fields were small and tube voltages were low. 3. Surface doses were a logarthmic proportion to the focus-object distance. 4. Multiple factors of exposure by using grid were under the control of the thickness of objects, irradiated fields and tube voltages but the relation of them were not fixed.

• 전자공학회논문지
• /
• 제52권12호
• /
• pp.46-54
• /
• 2015

SAR(Synthetic Aperture Radar)는 radio wave를 이용하여 영상 정보를 얻는 Radar이다. Platform이 radio wave를 방사하여, 대상 물체에서 되돌아오는 후방 산란파 (Back-scattering) 신호를 거리에 따라 2차원 영상(SAR image)으로 기록하여 지형도를 작성한다. 본 논문에서는 SAR image 복구를 위해 SAR image processing에서 다양한 window를 적용하는 시뮬레이션을 통하여 window의 적용 효과를 연구하였으며, 그 결과 신호의 SNR 측면에서는 Flattop window가 가장 좋은 성능 향상을 보여 주는 것을 확인하였다.

• 한국수산과학회지
• /
• 제51권3호
• /
• pp.305-312
• /
• 2018

This study was carried out to investigate euphausiid abundance in an acoustic survey from March 2010 to July 2010 to suggest reasonable usage and management of the euphausiid Euphausia pacifica in the coastal area of Guryongpo Pohang. The acoustic data were analyzed by the 2-frequency difference method and the distorted wave born approximation acoustical theoretical model, which is used for organisms of weak target strength with small scatter, such as euphausiid scatter, among other marine organisms. The distribution and monthly density of euphausiids were estimated in the survey area. The results show that the volume back scattering strength frequency difference for euphausiid was 13.91-7.6 dB, and their monthly averag density was $28.2g/m^2$.

• 디지털산업정보학회논문지
• /
• 제12권2호
• /
• pp.41-49
• /
• 2016

Lossless encryption methods are more applicable than lossy encryption methods when marginal distortion is not tolerable. In this research, the author propose a novel lossless symmetric key encryption/decryption technique. In the proposed algorithm, the image is transformed into the frequency domain using the lifting wavelet transform, then the image sub-bands are encrypted in a such way that guarantees a secure, reliable, and an unbreakable form. The encryption involves scattering the distinguishable frequency data in the image using a reversible weighting factor amongst the rest of the frequencies. The algorithm is designed to shuffle and reverse the sign of each frequency in the transformed image before the image frequencies are transformed back to the pixel domain. The results show a total deviation in pixel values between the original and encrypted image. The decryption algorithm reverses the encryption process and restores the image to its original form. The proposed algorithm is evaluated using standard security and statistical methods; results show that the proposed work is resistant to most known attacks and more secure than other algorithms in the cryptography domain.