• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.203-212
• /
• 2013

Objectives This study was to investigate the correlation of low back pain, stress by event, and fear-avoidance beliefs caused by traffic accident. Methods We investigated 103 cases of out-patient with traffic accident. The patients answered that Visual Analogue Scale (VAS), Impact of Event Scale Revised Korean Version (IES-R-K), and Fear-Avoidance Beliefs Questionnaire (FABQ) on the first medical examination. We calculated statistical significance with this data. Results VAS, IES-R-K, and FABQ scores of the female patients with the traffic accident were higher than the male patients. VAS, IES-R-K, and FABQ scores showed low significant positive correlation and showed partial correlation between IES-R-K and FABQ, controlled by VAS, had no statistical significance in this research. Conclusions More considerations on pain, stress by event, and fear avoidance belief should be needed in treatment of the traffic accident patients.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.600-607
• /
• 2004

This paper addresses a viscoplastic constitutive model that allows a consistent way of modeling positive and negative rate sensitivities of flow stress concerned with dynamic strain aging. Based on the concept of continuum mechanics, a phenomenological constitutive model includes the use of a yield surface within the framework of unified viscoplasticity theory. To model negative rate sensitivity, rate-dependent back stress is introduced and flow stress in fully developed inelastic deformation regime is thus decomposed into the plastic contribution of rate independency and the viscous one of rate dependency.

• Journal of Industrial Convergence
• /
• v.3 no.2
• /
• pp.73-84
• /
• 2005

Musculoskeletal Disorders are usually caused or aggravated by poor work processes and unsuitable working conditions - that involve repetitive or forceful movements or the maintenance of constrained or awkward postures. The condition is characterized by discomfort and persistent pain. Case and Demographic Characteristics for Work-related Injuries and Illnesses Involving Days Away From Work, 2003. U.S" was examined. Causes of musculoskeletal disorders for assembly line workers were carpal tunnel syndrome(CTS), tendonitis, low back pain, and occupational stress. Recommendations of improvement for productivity are redesign of working conditions, exercise, prevent of musculoskeletal disorders and avoiding stress.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.2
• /
• pp.265-276
• /
• 2004

The purpose of this study,was to find out health status, characteristics related to working conditions, occurrence of low back pain and its related factors among dental hygienists working in dental clinics, and, thus, to provide basic information necessary to set up some plans for preventing the occurrence of low back pains and improving working conditions for dental hygienists. The data were collected from 310 dental hygienists working at dental clinics in Pusan and Kyungnam area, including Masan, Changwon, Jinhae and Jinju, with a self-administered questionnaire and were analyzed finally for 295 records with SPSS for Windows(7.52K) program. The results were as follows : Working condition was considered to be fair by 562% of dental hygienists were thought to threaten their health in the dental clinics. About seventy percent of dental hygienists worked over ten hours a day and 72.8% were standing while working over 7 hours, 65% considered working hours too long. Health status was thought be more than average for 82.3% while more than half perceived certain degree of stress frequently. The rate of complaining low back pains among dental hygienists was 87.8% with pains more than medium level for 39.3%. The variables significantly related to the degree of low back pains were height, uncomfortable postures, type of working postures and the height of working table, while some variables including height, hours of working on the feet, the presence of hazardous work environment, uncomfortable postures, the presence of hazardous works, the amount of working hours, type of working postures and work-associated stresses, were significantly related to the number of symptoms for low back pains. Multiple regression analysis showed that occurrence of low back pains was significantly influenced by 5 factors such as subjective status of health, work-related stresses, the degree of perception to work environment, the degree of perception to the amount of working hours and age. In conclusion, it might be necessary to manage working conditions effectively by reducing working hours, making good postures while working and removing stressful conditions in order to reduce risk factors for the occurrence of low back pains among dental hygienists. Therefore good working postures, assignment of appropriate rest time and some programs for early detection, care and education of low back pains should be provided for the dental hygienists.

• The Journal of Engineering Geology
• /
• v.26 no.2
• /
• pp.169-175
• /
• 2016

Estimations of regional stress are demonstrated in this paper. Firstly, regional stress is defined and the characteristics of regional stress are then discussed based on the local stresses measured by the Compact Conical-ended Borehole Overcoring (CCBO) technique and the results from the earthquake focal mechanism. Secondly, the regional stresses are estimated by a back analysis of three-dimensional finite element models, using the local stresses measured by the CCBO and hydraulic fracturing.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.296-305
• /
• 1999

In ordinary back analysis it if hardly possible to obtain the mechanical properties of tunnel lining by using commonly measured displacements of tunnel lining, because only a few displacements could be measured at the site. Therefore, it is necessary to develop a new method which can evaluate the state of stresses of tunnel by using measured data. In this study, in order to assess tunnel lining stability by estimating its stresses with a few measured displacements, a formulation of back analysis method was proposed. The accuracy of results were investigated through the parametric study for several types of measurement model of two dimensional elastic lining. This new back analysis method to assess tunnel lining stresses and strains with a few numbers of measured displacements showed high accuracy and good applicability when compared to the results of numerical experiments by FEM. The method has been tested on subway tunnel and its applicability has been confirmed by comparing field and analytical data. It is verified that the stress on the tunnel lining can be obtained by only more than 3 point of input displacements without any condition of external loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.686-691
• /
• 2016

In welded steel structures, there are many stress concentration sites such as weld beads, and welding defects are likely to occur at the welded parts. When a repeated fatigue load acts on a stress concentration site, fatigue crack occurs and propagates, leading to fatigue fracture. Therefore, it is necessary to understand fatigue life, crack initiation life, and crack propagation life in order to prevent fatigue failure. In this study, a compliance method was derived for use in the study of fatigue crack propagation characteristics. This compliance can be used for automated measurement of fatigue cracks. The compliance was calculated using an in-house FEM program for a CT specimen. The results of this calculation are presented in relation to a/W and compared with calculation results using the J integral and a program from a previous study. In addition, the strain distribution in the upward and downward directions was calculated from the center of the back face of the CT specimen. In this distribution, the strain tended to decrease from the center to the top and bottom. The compliance method was achieved from these calculations and can be used for automatic execution of crack propagation tests.

• PNF and Movement
• /
• v.7 no.4
• /
• pp.9-16
• /
• 2009

Objective : The purpose of this study was to analyze the effect on psychosocial status in elderly women with chronic low back pain after practicing lumbar stabilizing exercise using the gym ball, and to developed and activated on exercise program for healthy senile life. Methods : The subjects were 23 elderly women with chronic low back pain. Mean age of subjects was $67{\pm}13$ years. The lumbar stabilizing exercise using the gym ball was performed 3 times a week during the 8 weeks study period. The research tool were ODI(Oswestry Disability Index), VAS(Visual Analogue Scale), SES(Self-esteem Scale), GDSSF-K(Geriatric Depression Scale Short Form Korea Version), PSS (perceived stress scale), Life satisfaction, and MMSE-K. The analysis of data was processed by the statistical program SPSS 12.0 and paired t-test and frequency analysis were used to compare psychosocial status between the pretest and post tests. Result : The lumbar stabilizing exercise using the gym ball increased significantly SES and Life satisfaction of subjects, and ODI, VAS(trunk flexion & trunk extention), GDSSF-K, and PSS were decreased significantly(p<.05). While VAS(trunk rotation) were not significantly. Conclusion : The lumbar stabilizing exercise using the gym ball improved psychosocial status in elderly women with chronic low back pain.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.55-66
• /
• 2009

Background: The purpose of this research was to investigate the factors affecting the low back pain of workers in hospital. 214 subjects waking at two general hospitals in Yosu city participated in this survey. Subjects consisted of doctors, nurses, medical engineers, officers and general laborers. The survey data were collected by a written questionnaire which made out by themselves for 25 days, from fourth August to 29th August, 2008. Methods: The questionnaire consisted of four categories, general, occupational, working habitual and the daily living characteristics. The collected data were analyzed by Chi-square test based on the present or absent of low back pain. Results: 1. In the general characteristics, low back pain had no significant relationship to all factors, sex, ago, body mass index, weight and height. 2. In the occupational characteristics, the phase of distribution of low back pain had statistical significant differences in the working hours a week, satisfaction of pay, satisfaction of occupation(p<0.05). However low back pain did not significantly related to the kind of occupation, period of work and degree of stress. 3. In the habitual characteristics, low back pain was significantly influenced by working posture, frequency of using lumbar and heavy material lifting, monotonous repetition of working operation and noise(p<0.05). No significant difference was shown in the factor of convenience of chair. 4. In the daily living characteristics, low back pain shown the significant differences in walking time a day, status of health and smoking pattern(p<0.05). there were, however, no significant differences in the aspect of the kind of house and bed, sleeping attitude, driving, riding time on the vehicle, exercising, frequency of cultural life and drinking alcohol. Conclusion: when I see above resultants totally, it appears a higher incidence caused by working environment rather than living habit and then consequently compared to hospital workers, they also have high incidence like others. In order to reduce incidence of low back pain and enjoy the our life we need to educate ourselves preventing program for low back pain and try to effort for preventing of low back pain on each department and individual.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.69-76
• /
• 2020

Since the mechanically stabilized earth walls have a form of retaining wall compatible with a narrow section, the geogrid overlaps according to the separation distance between the walls. There is a problem that the overall behavior may occur in the state of being integrated with the stress change due to the interaction of the geogrid. Therefore, a careful approach is required at the design stage, but there are currently no design criteria or guidelines in Korea. This study investigated the optimal reinforcement length ratio according to the retaining wall width to height ratio (width to height ratio, Wb/H) for these back-to-back mechanically stabilized earth walls. Retaining wall width ratio is 1.1H, 1.4H, 1.7H, 2.0H for Case II of the FHWA design standard, and the height is 3.0 m, 5.0 m, 7.0 m, and 10.0 m, which are most commonly applied. Through numerical analysis, the appropriateness of the FHWA design standard and the optimal reinforcement length ratio according to the height of the retaining wall and the width of the retaining wall were proposed.