• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• Physical Therapy Rehabilitation Science
• /
• 제11권1호
• /
• pp.43-48
• /
• 2022

Objective: In the present study, to determine the extent of academic stress and pain from sitting for a long time, we will use a questionnaire to examine the effects of non-face-to-face stress and back pain on college students who have conducted non-face-to-face lectures. Design: Survey research Methods: A questionnaire was conducted using Naver foam to identify academic stress, attitude and time to listen to lectures, and the extent of back pain for college students who are experiencing non-face-to-face lectures. Outcome measures include the scale of academic stress (SAS), the Numeric rating scale (NRS), the Oswestry Disability Index (ODI Korea version) was implemented. The difference in academic stress was analyzed by t-test and one-way ANOVA, and the correlation between academic stress and back pain was analyzed using the Spearman correlation coefficient. In order to examine the academic stress, consistency, and stability, the reliability of the academic stress items was measured by examining the reliability with the Cron-Bach alpha coefficient. Allstatistical significance levels were α=0.05. Results: According to the general characteristics of the subject, there were no statistically significant results compared to gender (P<0.05), but the higher the grade, the higher the stress index, the higher the level of pain. Conclusions: This study confirmed that non-face-to-face lectures caused by COVID-19 have increased academic stress and the resulting increase in back pain in college students.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1759-1772
• /
• 1994

In this study, we re-examined the Tate's modified Bernoulli equation to study penetration phenomena for long rod projectile into single or multi-layered finite thickness plates. We used the force equlibrium equation at mushroomed nose/target interface instead of conventional pressure equation at the stagnation point. In our penetration model, we considered the velocity dependent $R_t$ value for semi-infinite target and considered only the back face effect for finite target. To compensate for $R_t$ value according to target's thickness and back face effect, we used the spherical cavity expansion theory for semi-infinite plate and used the cylindrical cavity expansion theory for finite plate. Also we developed the experimental technique using make screen to measure the penetration duration time at each layered plate. In 3-layered laminated RHA/mild steel/ A1 7039 plate, we observed that spall had occured around the back face of A1 7039 plate by the stress wave interaction. Through the comparison between theoretical and experimental data including Lambert's results, we conform that our study has good confidences.

• 산업기술연구
• /
• 제28권B호
• /
• pp.143-148
• /
• 2008

A real-time face detection is to find human faces robustly under the cluttered background free from the effect of occlusion by other objects or various lightening conditions. We propose a face detection system for real-time applications using wavelet decomposition method based on Gabor features. Firstly, skin candidate regions are extracted from the given image by skin color filtering and projection method. Then Gabor-feature based template matching is performed to choose face cadidate from the skin candidate regions. The chosen face candidate region is transformed into 2-level wavelet decomposition images, from which feature vectors are extracted for classification. Based on the extracted feature vectors, the face candidate region is finally classified into either face or nonface class by the Levenberg-Marguardt back-propagation neural network.

• 한국응급구조학회지
• /
• 제20권3호
• /
• pp.49-56
• /
• 2016

Purpose: The purpose of this study was to investigate the effect of a pathogenic bacteria filtration instrument for infection prevention during mouth-to-mouth ventilation. Methods: Two kinds of face shields were used for the study. One rescuer blew the filter through a bag valve mask and the filter was then cultured for bacteria. The mask was tested both on the front and back side. Results: Two kinds of face shields including the KF shield and CM shield were tested. The KF shield has received national certification and it prevented transmission of bacterial infection but the CM shield showed the opposite result and did not prevent bacterial transmission. Pathogenic bacteria were found on the back of the CM shield. Conclusion: A certified face shield is very important to prevent bacterial transmission. Face shields should be demonstrated and used by paramedic students.

• 융합신호처리학회논문지
• /
• 제7권3호
• /
• pp.95-101
• /
• 2006

얼굴검출은 얼굴인식과 비디오감시 시스템, HCI등 응용분야가 다양하므로 많은 연구가 필요하다. 따라서, 본 논문에서는 실시간으로 얼굴을 검출하기 위하여 카메라에서 연속 얼굴 영상을 획득 한 후, 이 영상을 YCbCr 칼라 공간으로 변환하였다. 변환된 칼라 공간에서는 필터를 이용하여 피부색만을 분리하여 연결성분 분석으로 얼굴후보 블록을 결정하였다. 또한 외부 환경 변화에 영향을 받지 않기 위해 밝기 분포 평준화를 수행하였다. 밝기 분포를 평준화한 영상에서는 눈 영역이 다른 영역에 비해 뚜렷하게 구별되기 때문에 임의의 임계값을 적용하여 이진화 영상으로 변환 후 눈 검출을 할 수 있었다. 순차 임계값은 낮은 값에서부터 순차적으로 값을 증가시키면서 눈을 검출하고, 실패하였을 경우는 임계값이 조정되어 다시 눈을 검출한다. 순차 임계법에 의해 검출된 눈 영역은 정규화과정을 거친 후 역전파 알고리듬을 이용하여 눈 검증을 실시하고, 최종적으로 얼굴 검출을 수행하였다.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.118-123
• /
• 2007

We have studied the effect of Au-Cu back layer system ${\sim}10{\AA}$ thick on the properties of a spin valve. The back layers were Cu, Au, co-sputtered $Cu_xAu_{1-x}$, laminated $[Au/Cu]_n$. and bi-layer [Au/Cu]. When Au was added to the Cu, the resistance of the spin valve abruptly increased most likely due to impurity scattering. The GMR values were not increased significantly for all the structures. In the case of co-sputtered $Cu_xAu_{1-x}$, the changes in the resistance, ${\Delta}R$, was increased at a composition of ${\sim}Au_{0.5}Cu_{0.5}$. This increase in ${\Delta}R$ is due to increase in the resistance and not from the enhanced spin-dependent scattering. The structural analyses showed that the orthorhombic $Au_{0.5}Cu_{0.5}$ was formed in the back layer instead of the face-centered tetragonal $Au_{0.5}Cu_{0.5}$ as we expected. Thermal annealing over $400^{\circ}C$ may be required to have face-centered tetragonal in the $10{\AA}$ thick ultra-thin film. In the case of a laminated or bi-layered back layer, the properties of the spin valve were improved, which may be attributed to the increase in the mean free path of conduction electrons.

• 대한임상전기생리학회지
• /
• 제8권1호
• /
• pp.1-5
• /
• 2010

Purpose : This research inquires into the effect of applying microcurrent (MC) according to various frequency levels on the pain and functional recovery of patients with chronic back pain. Methods : Thirty participants with chronic lower back pain disease were divided equally into three experimenta l groups. The MC frequency used in the first experimental group was 0.5Hz, the second experimental group was 50Hz, and the third experimental group was 100Hz for 20 minute sessions. A hot pack and ultrasound were applied to all groups as the general physical therapy. Measurements were taken using the visual analogue scale (VAS), the face pain rating scale (FPRS), and the Oswestry disability index (001). The analysis used the paired t-test in order to compare pretest and posttest results. A one-way ANOVA was performed to make comparisons with regards to frequency levels. Results : VAS, FPRS, and 001 showed significant pain decrease in all groups except for the 001 measurement in the 0.5 Hz group. There were no significant differences according to frequency levels. Conclusion: For chronic pain and functional recovery, a microcurrent produces an effect after treatment. However, results did not show a significant difference in change obtained from differing frequency levels.

• 대한통합의학회지
• /
• 제10권3호
• /
• pp.131-140
• /
• 2022

Purpose : Although many studies have explored the effect of seating side angles on the spinal curve and surrounding muscles during seating, only a few studies have investigated the effect of different seating face angles on different lower limb and deep trunk muscles. Therefore, this study investigated the effects of seating surface angles (0 degrees, 10 degree anterior, and 10 degree rear) on lower extremity and deep trunk muscles in healthy adults. Methods : Thirty people were asked to sit once on each seating surface three times during the day, and their muscle thicknesses were measured by ultrasound while sitting. The method of sitting was the same when sitting on the three seating surfaces. Results : From the comparison results of the muscle thicknesses according to the seating surface angles, a significant difference existed in the muscle thicknesses of the vastus medialis, vastus medialis oblique, vastus intermedius, soleus and gastrocnemius (p<.05). However, no significant difference was found in the transversus abdominis, internal obliques, rectus femoris and vastus lateralis (p>.05). Conclusion : Our findings revealed that the lower back load decreases, the leg load increases, and the legs specific muscles are affected as the body tilts forward when sitting on the seating surface inclined forward. Therefore, it is possible to suggest a forwardly inclined seating surface that reduces lower back loads and utilizes the posture-maintaining muscles of the legs when sitting in a person with a poor sitting posture or lower back pain at ordinary times.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.139-152
• /
• 2018

본 연구에서는 경상분지 퇴적암지대 특히 양산단층대(일광동래단층대) 구간 퇴적암 비탈면에서 도로 시공 시 불연속면(층리)에서 발생된 파괴사례를 분석하였다. 이 지역의 경우 다른 지역에 비해 시공 중 비탈면파괴 사례가 유독 많이 발생된 지역이다. 노출된 파괴 비탈면에 대한 Face Mapping 작성 후 한계평형법에 의한 역해석을 통해 불연속면(층리)의 전단강도 파라미터를 산정하였다. 분석 결과 이 지역 불연속면(층리면) 비탈면 경우 기존 설계 전단강도 파라미터 값 및 문헌제시 값과 비교했을 때 상당히 작게 산정되는 것으로 나타났다. 이것은 층리면에 존재하는 잔존물과 지하수의 유출 등에 의한 영향으로 볼 수 있는데, 특히 점토와 같은 풍화잔존물이 불연속면의 전단강도에 감소에 영향을 미친 것으로 판단된다. 그리고 마찰각은 층리면각과 서로 비례하는 경향을 보여 두 변수사이에 관계식을 제시하였다. 이 식을 이용하여 노출된 층리면각을 알면 쉽게 전단강도 마찰각을 손쉽게 산정할 수 있다.