• 한국콘텐츠학회논문지
• /
• 제9권3호
• /
• pp.296-304
• /
• 2009

본 연구는 산업 및 업무 현장의 환경에서의 요통 발생률을 최소화하고자 현재 지속적으로 연구되어지는 골반 자세와 요통 예방 치료를 위해 사용되어지는 허리벨트를 사용하여 요부의 척추기립근에 대한 근활성 정도를 알아보고자 하였고, 그 결과 벨트 미착용 시 근 활성이 유의하게 높게 나타났으며, 골반 전방경사시 더 높은 근활성을 나타냈다. 따라서 요부를 안전하고 요통의 위험요인 들로부터 예방하기에 적합한 요추 전만자세의 필요성을 알게 되었고, 허리벨트의 사용으로 인해 보다 올바른 물건 들기 자세를 교육할 수 있음을 알 수 있었다.

• PNF and Movement
• /
• 제15권3호
• /
• pp.353-360
• /
• 2017

Purpose: This study aimed to measure static balance of low back pain patients while one-leg standing in abdominal compression belts. Methods: The study included 40 adult males and females at J university, divided into a low back pain patient group and a normal group through the Oswestry disability questionnaire (ODQ). The subjects were instructed to hold a one-leg standing posture for 15 seconds on a balance measurement plate while wearing an abdominal compression belt. Shifting distance (0.1 cm), mean velocity (cm/s), pressure, and contact area were analyzed using BioRescue (BioRescue, RMINGEIEIRIE, Rodez, France). The average value was used to measure the result 3 times for each condition. Results: Both normal and low back pain groups significantly decreased in the speed of sway while wearing the abdominal compression belt. Furthermore, the pressure of the center of motion significantly decreased in the low back pain groups while wearing abdominal compression belt. However, there were no significant differences in the speed of sway or the pressure of center of motion between groups after wearing the abdominal pressure belt. Conclusion: These results suggest that abdominal compression belts are one option for improving balance temporarily. However, balance after wearing abdominal compression vests depends on onset of back pain, age, and symptoms of pain in the groups with low back pain. Further research is needed to investigate muscle activity, dynamic balance, and the effect of the period of wearing abdominal compression belts in the variety of low back pain patients.

• 복식
• /
• 제56권8호
• /
• pp.113-122
• /
• 2006

In this study, about forty teaching materials have been analyzed in order to examine tight skirt sewing methodtreated in basic process in a college and a fashion related educational institution. The study objects limited with a belt, back centered zipper, and back double slits on a tight skirt, and used fifteen suitable teaching materials in this study. The first study result appeared that every single teaching material suggested the different way of wick adhesion which is used in zipper slit, back slit, and belt part when the skit has been manufactured in order to do a form of clothes well. Secondly, it is the case of a back slit part used for the purpose of both functionality of action and decoration, and it is the section which varies a sewing and cutting way according to seam room width of a back middle seam. However, the majority of teaching materials appeared by being selecting the way how it had cut an inseam of the back center by the both upper part of back slit. Finally, the result showed that it mentioned mainly only both sided zipper sewing method if it seems to be easy to treat the majority in a basic process even though use of a console zipper Is general on a zipper sowing way recently for several years. Also, two forms are used in the belt manufacturing, and they are based with a waist line. However, the teaching materials that were used in this study presented only a manufacture way of the straight line on the waist belt.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.91-100
• /
• 2004

This study presents the development of a new aluminum seat frame for the commercial bus. Back moment and seat belt anchorage analysis of the conventional steel seat frame was conducted as a base model. Effective aluminum section dimensions for aluminum pipe were calculated from equivalent stiffness and equivalent weight study. Back moment and seat belt anchorage strength with the developed aluminum seat frame were compared to those of the base model. Additionally, to pass the fatigue test, shape modification of side frame assembly was conducted. From this study we could reduce the weight of seat frame more than 5 kg. And the current analysis model and procedure can provide useful informations in designing a new commercial car seat and can reduce the overall design cost and time.

• 복식
• /
• 제51권4호
• /
• pp.57-69
• /
• 2001

The purpose of this study is to examine the costume represented In human clay figures of ancient Shilla dynasty. The results of this study could be summarized as follows: 1. Horse-riding clay figures of Gumryoung tomb. At first, human-A wears a brimed-triangular hat, a Jacket, a checked pants. The brimed-triangular hat is decorated with bird-feather shape. Besides, a jacket is tied with a waist belt, and the waist belt is connected with a shoulder belt and a squared block of back. Also round bells are decorated 15 in the hat, 4 In connection points of the waist belt and the shoulder belt, and 13 in the squared block of back. Human-B wears a hairband type hempen hood, a Jacket, a pants with vertical stripes. and something is rounded from right shoulder to left side. It is one of the symbols as a shaman. 2. Other clay figures. The hats examined from other clay figures are \circled1 Triangular hat, \circled2Hat decorated with bird-feather shape, \circled3 Brined hat and \circled4 Hairband type hempen hood. Next, six kinds of hair styles examined are \circled1 a topknot, \circled2 a slanted topknots, \circled3 two topknots on both sides, \circled4(round) chignon, \circled5 hair tied at the top and plastered down, and tile last, \circled6 ponytailed style on both sides. The costume examined is a jacket and a pants.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.644-647
• /
• 2003

This paper describes a neural network based machine vision system designed for inspecting yellow beans in real time. The system consists of a camera. lights, a belt conveyor, air ejectors, and a computer. Beans are conveyed in four lines on a belt and their images are taken by a monochrome line scan camera when they fall down from the belt. Beans are separated easily from their background on images by back-lighting. After analyzing the image, a decision is made by a multilayer artificial neural network (ANN) trained by the error back-propagation (EBP) algorithm. We use the global mean, variance and local change of gray levels of a bean for the input nodes of the network. In an our experiment, the system designed could process about 520kg/hour.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.173-178
• /
• 2016

Six-step commutation control widely used in brushless DC (BLDC) motor can be applied to consequent pole permanent magnet (CPPM) belt starter generator (BSG) with trapezoidal back electromotive force (EMF) in the starter state. However, rotor position detection with three Hall sensors in BLDC motor can hardly be employed in CPPM BSG due to asymmetric flux distribution in each pole side of CPPM BSG. This paper presents a low-cost rotor position detection method for CPPM BSG in which six Hall sensors are proposed to be used based on the analysis of flux distribution by 3D FEA. In the method, the six Hall sensors are divided into three groups and two signals in each group are combined through performing logic operations. In addition, offset angle between back EMF and the related Hall signal can be compensated by moving the Hall sensors. Experiments of a 2 kW CPPM BSG prototype have also been performed to verify the proposed method.

• PNF and Movement
• /
• 제18권2호
• /
• pp.223-231
• /
• 2020

Purpose: The purpose of the study was to compare the effects of different methods of pelvic control on abdominal muscle activity and lumbopelvic rotation angle during active straight leg raising (ASLR) in patients with chronic back pain. Methods: The study participants were patients with low back pain (n = 30). They were instructed to perform ASLR with pelvic control, ASLR with pelvic belt, and ASLR only. Surface electromyography data were collected from the ipsilateral rectus femoris (IRF), ipsilateral internal oblique (IIO), contralateral external oblique (CEO), and ipsilateral rectus abdominal (IRA) muscles, and lumbopelvic rotation angle was measured using a motion analysis device. Results: Activation of all abdominal muscles was greater in the ASLR with pelvic control group than in the ASLR with pelvic belt and ASLR groups. The lumbopelvic rotation angle was lower in the ASLR with pelvic control group than in the other two groups (p < 0.05). Conclusion: These results suggest that ALSR with pelvic control is an effective means of increasing abdominal muscle activity and reducing unwanted lumbopelvic rotation in patients with chronic low back pain. Controlling the pelvis using the opposite leg is an effective form of ASLR exercise for patients with chronic low back pain.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.537-547
• /
• 2017

This study evaluates the wearing performance of a self-contained breathing apparatus (SCBA) belt for firefighters in Korea. A SCBA belt design was suggested based on the wearing evaluation of a SCBA belt; subsequently, prototypes I and II were created. A wearing evaluation of prototypes with improved design and design preference was performed. Six designs elements of the SCBA belt for firefighters were suggested based on the survey results of wearing the SCBA belt and for the SCBA belt design preference for use by firefighters. First, belt material should be made of black high-strength aramid textiles. In addition, Velcro should be used to attach and detach retroreflective and fluorescent materials along with various colors for visibility. Second, the chest belt should be made of the same material used for other parts; in addition, the chest belt should be moved to the center for center of gravity and a cobra buckle should be applied. Third, an O-ring should be applied to the back and the belt connected to the O-ring should distribute the weight in six axes. Fourth, a detachable air respirator should be able to separate by using upper and lower cobra buckles. Fifth, a separable leg belt and a detachable pocket are also suggested. Sixth, a ring for walkie-talkies, alarms and equipment as a fabric ring are also suggested. Prototype III with an improved design was created based on the results of the design suggestion.

• 대한가정학회지
• /
• 제36권6호
• /
• pp.85-94
• /
• 1998

In this study we tested the physiological influence on human-body according to clothing pressure with reduction rate and varied posture using three kinds of belt with different width. The width of belts were 2.5cm, 3.5cm and 4.5cm, and reduction rates of belts were 0%, 2.5% and 5% of the subject/s waist size respectively. the measured postures were standing state and sitting stste in the chair. The reasults are as follows; 1. Clothing pressure was high in the order of Side part>Front part>Back part and the rate fo change in the side part was highest, according to the reductio rate of belts. The more the width of belt was wide, the less the clothing pressure was small, and this kind of phenomenon could be explained by "The Principle of the power". 2. Both the rate of reduction of belt and the change of average skin temperature in accordance with the width of belt is small, however, the more the width of belts is wider and the reduction rate is bigger, the more the skin temperature at the waist part is increased. 3. The blood pressure and pulse was influenced when the width of belt was narrow and the reduction rate was high. 4. A sense restraining was much influenced by the width of belt, especially when the width of belts was wide, the significant difference was permitted.permitted.