• 제목/요약/키워드: Babbitt

검색결과 4건 처리시간 0.019초

원심주조법에 의한 주철-Babbitt Metal 복합관 제조에 관한 연구 (A Study on the Fabrication of Cast Iron-Babbitt Metal Composite Pipes by Centrifugal Casting Process)

  • 이충도;강춘식
    • 한국주조공학회지
    • /
    • 제13권1호
    • /
    • pp.42-49
    • /
    • 1993
  • Conventional manufacturing process for cast iron-babbitt metal composite is complicate and bimetallic bonding by centrifugal casting is also difficult because their melting point is largely different and nonmetallic inclusion exists on outer shell. This study is aiming to simplify multistage process by adding Cu-powder as insert metals during cast iron solidification. The variables on fabrication of composite pipe are mold rotating speed and inner surface temperature of outer metal. The optimum temperature range for fusion bonding between cast iron and Cu-layer was $1100^{\circ}C-1140^{\circ}C$ in case of mold rotating speed was 700rpm. When the inner surface of Cu-layer was at $900^{\circ}C$, the value of interfacial hardness between Cu-layer and babbitt metal were higher than Cu-matrix by forming diffusion layer, interfacial products between Cu-layer and babbitt metal are proved to be $Cu_6Sn_5({\eta})$by XRD.

  • PDF

초음파 수침법을 이용한 터빈베어링 Babbitt금속 박리 검사 기술 (Implementation of Ultrasonic Immersion Technique for Babbitt Metal Debonding in Turbine Bearing)

  • 정계조;박상기;조용상;박병철;길두송
    • 비파괴검사학회지
    • /
    • 제24권4호
    • /
    • pp.348-353
    • /
    • 2004
  • 이 연구는 터빈베어링의 신뢰성을 평가하기 위하여 초음파 C-Scan 방법을 적용한 기술이다. 수침법에 관한 연구는 실험실과 현장검사 적용에 광범위하게 사용되는 기술이다. 여기에서는 C-Scan 방법을 이용하여 베어링의 모재와 Babbitt 금속간 경계부의 상태를 평가하였다. 수침법 C-Scan 방법에 의한 초음파 영상은 베어링 경계부의 상태를 확인하는데 효과적인 방법으로 사용될 수 있었다. 초음파 영상의 분해능을 높이기 위하여 집속형 탐촉자를 사용하고, Babbitt 금속과 베어링 모재간의 접합경계면에서 발생하는 초음파 음압 반사율을 측정하여 결함의 검출과 면적을 추정할 수 있었다. 초음파 수침법은 베어링 접합부의 박리위치와 박리면적의 경계면을 결정하여 크기를 계산하는데 아주 유용하게 사용될 수 있는 기술이며, 이 연구에서 개발된 기술은 화력발전소에서 사용되고 있는 터빈베어링의 건전성을 확보하는데 적용되었다.

양이온 교환 크로마토그라피에 의한 Babbitt 금속의 분리 및 정량 (The Separation and Analysis of Babbitt Metal by the Cation Exchange Chromatographic Method)

  • 김선태;차기원;박기채
    • 대한화학회지
    • /
    • 제15권6호
    • /
    • pp.366-369
    • /
    • 1971
  • The cation exchange chromatographic method for the analysis of Babbitt metal has been studied. The quantitative separation of the mixture of Sb, Cu, Pb, and Sn ions has been obtained by elution, through 5cm column of resin, Rexyn 101 (Na form, 100~200 mesh), using 0.1 M NaCl solution for Sb, pH 4.5 and pH 7 solution of 0.01 M Na-Citrate + 0.1 M $NaNO_3$ for Cu and Pb, and 2NHCl solution for Sn as eluent.

  • PDF

예압 변경을 통한 틸팅패드 저널베어링의 Spragging 방지에 관한 연구 (Study on the prevention of spragging in a tilting pad journal bearing using the variation of preload)

  • 양승헌;박철현;하현천;김재실
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집C
    • /
    • pp.281-286
    • /
    • 2001
  • Tilting pad journal bearings have been widely used in a high speed rotating machinery, such as steam turbines and gas turbines, owing to their inherent stability characteristics. However, some peculiar fatigue failure in the babbitt metal due to spragging has been continuously occurred at the leading edge of the upper pads. The spragging is defined as the pad vibration initiated on the upper unloaded pads in a tilting pad journal bearing. This paper describes both several kinds of bearing failure related with spragging and the theoretical investigation on the prevention of the spragging phenomenon using the variation of preload. Results show that positive preload(m>0.5) assures all pads remain statically loaded under all operating conditions. For the change of design parameter to prevent spragging, thermo-hydrodynamic lubrication and rotor dynamic analysis were performed to verify temperature limitation on bearing and vibration problems on rotor bearing system.

  • PDF