• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.104-104
• /
• 2003

RF magnetron sputtering 법을 이용하여 LaA1O$_3$, SrTiO$_3$, MgO 단결정 기판 위에 BaTiO$_3$ 박막을 에피텍셜하게 증착하여 박막의 특성과 마이크로 웨이브에서의 유전특성을 평가하였다. 각 기판위에 증착한 박막의 격자상수와 FWHM을 조사하였고, pole figure로 에피텍셜 성장을 관찰하였다. 각 시편에 상부 전극으로 interdigital 타입의 전극을 photolithography 하여 캐패시턴스와 tan $\delta$을 조사하였다. 각 기판의 변화에 따른 격자상수 변화와 유전 특성의 변화를 고찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.251-254
• /
• 1998

The ($0.8BaTiO_3-0.1SrTiO_3-0.1MgTiO_3$)+$0.006Nb_2O_5$ ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300C for 3hours and then annealed at $1,100^{\circ}C$ for 3hours in a atmosphere (air) to be painted on the surface with CuO paste. The results of the temperature and frequency are varied, the dielectric constant and loss tangent are unsuitable for BL capacitor. The dielectric constants were varied to be negative temperature coefficient(2.000-3,000) in the temperature range between -10 and $140^{\circ}C$, the dissipation factors (tan $\delta$) were some high(0.1-0.3). It was not grain insulation, in cause of the some difficult to be annealed temperature with CuO paste and fired atmosphere. But, we have some different annealing temperature and fired atmosphere, it will be suitable BL(Boundary Layer)capacitor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.103-106
• /
• 2002

The applicability of models based on fractal morphology to characterize $(Ba\;Sr)TiO_{3}$ thin film surfaces was investigated. The fractal morphology of coated barium strontium titan oxide thin film surfaces was described using fractal dimension from scanning electro microscopy image. The $(Ba\;Sr)TiO_{3}$ coating were deposited on silicon wafers using $(Ba\;Sr)TiO_{3}$ solution and spin coater. BST solution was composited by mol ratio, and then spin-coated from 3 times to 5 times coating on $Pt/SiO_{2}/Si$ substrate. Qualitative thin film analysis was performed with scanning electro microscopy (SEM), and surfaces parameters such as average grain diameter, roughness exponent and fractal dimension were determined.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.441-447
• /
• 1995

Ba0.65Sr0.35TiO3 (BST) thin films were deposited on Pt/SiO2/Si(100) substrate by rf magnetron sputtering. The substrate temperature changed from 35$0^{\circ}C$ to 55$0^{\circ}C$ and crystalline BST thin films were deposited above 45$0^{\circ}C$. Most of the films had (111) preferred orientation regardless of deposition temperature, but the films changed to (100) preferred orientation as gas pressure increased. The dielectric constant increased with increasing substrate temperature and film thickness, and ranged from 100 to 600 at room temperature. The leakage current increased as substrate temperature increased or as film thickness decreased.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.75-75
• /
• 2001

Si₃N₄/SiO₂/Si₃N₄ 멤브레인에 의해 실리콘 기판으로부터 열차단된 비냉각 초전형 박막 (Ba,Sr)TiO₃ 적외선 검지기를 제작하고, 적외선 검지기의 특성을 논의하였다. 25℃의 공기중에서 쵸핑주파수가 1 ㎐일 때 적외선 검지기는 약 168.8 V/W의 비교적 높은 전압 감응도를 나타내었으나, 매우 작은 신호대잡음비 때문에 약 2.6×10⁴㎝·㎐/sup 1/2//W의 낮은 비검지도를 나타내었다. 또한 출력파형의 쵸핑주파수 및 온도 의존성에 대한 정성적인 해석으로부터 적외선 검지기의 열잡음전압 및 열시정수가 모두 상당히 크다는 것을 알 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.47-54
• /
• 1997

Pt/SiO2/Si을 기판으로 사용하고 RF 마그네트론 스퍼터링에 의한 (Ba, Sr)TiO3 (BST) 씨앗층을 약 10nm 정도의 두께로 입힌 다음 그 상부에 화학 기상증착법으로 BST를 증착하여 BST seed layer가 CVD BST 박막의 특성에 미치는 영향을 조사하였다. 또한 급 속열처리가 BST 박막과 커패시터의 특성에 미치는 영향도 조사하였다. Seed layer와 급속 열처리에 의해 박막의 결정성이 향상되었으며 이로인해 유전상수가 증가되었고 주파수에 대 한 유전특성도 개선되었다. Seed layer를 도입함으로써 BST 박막과 Pt 하부전극 사이의 계 면에 존재하고 있는 산소부족\ulcorner이 사라짐을 확인할수 있었으며 이로 인해 Pt/BST/Pt 커\ulcorner 시터의 누설전류가 감소하였다. 또한 급속 열처리에 의해 BST/Pt 계면에서 트랩된 전자의 농도가 감소함으로써 누설전류 특성이 개선됨을 알수 있었다. Seed layer 위에 증착된 CVD BST 박막의 유전상수는 증착온도가 증가함에 따라 증가하였으나 누설전류도 같이 증가하 였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.379-382
• /
• 1998

(Ba, Sr)TiO$_3$[BST] thin films were fabricated on Pt/SiO$_2$/Si substrate by RF sputtering technique. The Mic개structure, dielectric and electrical properties of BST thin films were investigated with sputtering pressure. Dielectric constant and dielectric loss of the deposited thin film at sputtering pressure of 5 mTorr were about 91 and 1.9(%), respectively. Increasing sputtering pressure, leakage current was increased. It was found that leakage current of BST thin films was depended on the sputtering pressure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.290-293
• /
• 1999

(Ba$_{0.5}$Sr$_{0.5}$)TiO$_3$ thin films were fabricated at different RTA temperatures and thicknesses by Sol-Gel method. Solution consisting of acetate powders and titanium isopropoxide in a mixture of acetic acid and ethylene glycol were spin coated onto Pt/Ti/SiO$_2$/Si substrates. The films were annealed in the temperature range of 650~80$0^{\circ}C$ for 3 minutes by rapid thermal annealing. These BST thin films were fully crystallized at 75$0^{\circ}C$ and showed a maximum dielectric constant value of $\varepsilon$$_{r}$=~468 and dielectric loss was ~0.025 at a thickness of approximately 4000$\AA$.EX>.>.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.84.1-84.1
• /
• 2007

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.123-126
• /
• 2001

The $0.98MgTiO_3-0.02BaTiO_3$ ceramics were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature and composition ratio by XRD, SEM and EDS. According to the X-ray diffraction patterns of the $0.98MgTiO_3-0.02BaTiO_3$ ceramics, the hexagonal $BaMg_6Ti_6O_{19}$ and ilmenite $MgTiO_3$ structures were coexisted. The dielectric constant$({\varepsilin}_r)$ and quality factor$(Q{\times}f_r)$ were decreased with increasing the sintering temperature in the range of $1275^{\circ}C{\sim}1350^{\circ}C$. In the case of the $0.98MgTiO_3-0.02BaTiO_3$ ceramics sintered at $1275^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.27, 76,845, $-46.6ppm/^{\circ}C$, respectively.