• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.422-426
• /
• 2006

This research was conducted to get the basic materials necessary to obtain the somatic hybrid plant between Solanum sisymbriifolium and other Solanum species (S. integrifolium and S. toxicarium). Regarding the formation of colony from the protoplast in S. sisymbriifolium, S. integrifolium and the fused protoplast mixture; for the S. sisymbriifolium, a colony was observed in F medium(Kao medium containing $5.0mg{\cdot}L^{-1}\;NAA,\;1.0mg{\cdot}L^{-1}$ 2,4-D and $1.0mg{\cdot}L^{-1}$ BA); and for the S. integrifolium, in G medium (a half strength MS medium containing 0.03 M sucrose, 0.4 M mannitol, $1.0mg{\cdot}L^{-1}\;NAA,\;1.0mg{\cdot}L^{-1}$ kinetin) respectively. In mixed cultured protoplast after electriofusion treatment, the cell division and colony formation were observed in both media F and G. For the shoot and root formation rate, there was no difference between the parent of each breed and mixed protoplast regardless of the medium. In the fused protoplast mixture of S. sisymbriifolium and S. toxicarium, a colony formation was also observed in both media F and H(a half strength MS medium containing 0.03 M sucrose, 0.4 M mannitol, $1.0mg{\cdot}L^{-1}\;NAA,\;1.0mg{\cdot}L^{-1}$ kinetin); and there was no difference in the shoot and root formation rate between the parent and the mixed protoplast.

• Journal of KIISE
• /
• v.44 no.8
• /
• pp.832-841
• /
• 2017

Bug reports are essential documents for developers to localize and fix bugs. These reports contain information regarding software bugs or failures that occur during software operation and maintenance phase. Information Retrieval-based Bug Localization (IR-BL) techniques have been proposed to reduce the time and cost it takes for developers to resolve bug reports. However, if a low-quality bug report is submitted, the performance of such techniques can be significantly degraded. To address this problem, we propose a quality prediction method that selects low-quality bug reports. This process; defines a Quality property of a Bug report as a Query (Q4BaQ) and predicts the quality of the bug reports using machine learning. We evaluated the proposed method with 3 open source projects. The results of the experiment show that the proposed method achieved an average F-measure of 87.31% and outperformed previous prediction techniques by up to 6.62% in the F-measure. Finally, a combination of the proposed method and traditional automatic query reformulation method improved the MRR and MAP by 0.9% and 1.3%, respectively.

• Microbiology and Biotechnology Letters
• /
• v.10 no.3
• /
• pp.177-184
• /
• 1982

Studies were carried out to investigate the optimal culture conditions for the production of penicillinase using a strain of Streptomyces sp. isolated from soil, YS-40. Among the carbon and nitrogen sources, glucose and L-asparagine increased the peniciilinase production. The addition of M $n^{＋＋}$, $Ca^{＋＋}$ and L $i^{＋}$ increased the enzyme production, but depressed by F $e^{＋＋＋}$, F $e^{＋＋}$, $Mg^{＋＋}$, Z $n^{＋＋}$, A $g^{＋＋}$, $Ba^{＋＋}$ and S $n^{＋＋}$. L-Leucine slightly increased the enzyme production but L-histidine, L-methionine depressed. Among the vitamins riboflavine, i-inositol, hesperidine, niacin-amide, biotin, folic acid, DL-$\alpha$-lipoic acid increased the enzyme formation. The addition of cephradine, cephalexin, ampicillin, cloxacillin more increased the enzyme formation than that of other$\beta$-lactam antibiotics and antibiotics. Optimal pH and temperature on the enzyme formation was pH 7.0 and 28$^{\circ}C$ respectively Amount of the enzyme production reached at maximum with incubation for 3 days on the optimal condition.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.2
• /
• pp.93-97
• /
• 1999

Shoot tips with 2 leaf primordia were cultured to induce shoot primordia in MS liquid medium supplemented with several concentrations of BA and hIAA under the conditions of 10,000 lux illuminations for 24 h and of vertical shaking of 2 rpm in carrot. Two F$_1$ hybrids and two male sterility lines were used. Shoot primordia were only induced in the medium supplemented with 2.0 mg/L of BA and 0.2 mg/L of NAA. Genotypic specificity and seasonal effect of donor parents on shoot primordia induction were not observed and average 15-20% of the planted dornes developed to shoot primordia. The induced shoot primordia were successfully propagated by subculture in the same medium. However, they were grown into three different types during multiplication, that is, the type with multiple small shoots on the surface, the type of without any shoot, and the type of callus. Shoot primordia clusters with small shoots on the surface differentiated multiple shoots successfully in 1/2 MS solid medium supplemented with 0.2 to 1.0 mg/L of IAA and 0.2 to 1.0 mg/L of kinetin. New shoot primordia with small shoots were well formed when pieces bigger than 2 mm in diameter of the out layer of the shoot primordia cluster with small shoots were subcultured. No differences of multiplication and shooting ability and chromosomal variation of shoot primordia were observed until the 13th sub-culture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.179-179
• /
• 2009

This is for the electrical characterization by IDC pattern using BST$(Ba_{0.5}Sr_{0.5}TiO_3)$ thin film. BST materials had been chosen for high frequency applications due to it's high permitivity and tunability. The BST thin films have been deposited on $Al_2O_3$ Substrates by Nd-YAG pulsed laser deposition with a 355nm wavelength at $700\;^{\circ}C$. The post deposition annealing at $750^{\circ}C$ in flowing $O_2$ atmosphere for 1 hours. The capacitance of IDC patterns have been measured from 1 to 10 GHz as a function of electric field ($\pm40$ KV/cm) at room temperature using inter-digital Au electrodes deposited on top of BST. The IDC patterns have three type of fingers number. For the 10 pairs finger was the best capacitance onto $Al_2O_3$ substrate. The capacitance was 0.9pF. Also Dielectric constant was been 351 at 100 mTorr and annealing temperature $750^{\circ}C$ for 1 hour. The loss tangent was been 0.00531.

• Journal of Environmental Science International
• /
• v.11 no.5
• /
• pp.455-461
• /
• 2002

Polycyclic aromatic hydrocarbons(PAHs) are ubiquitous contaminants in coastal marine environment. PAHs enter estuarine and nearshore marine environment via several routes such as combustion of fossil fuels, domestic and industrial effluents and oil spills. In August of 1997, mussels(Mytilus edulis) were collected at 6 sites near Kori nuclear power plant in order to analyze the PAH content by HPLC with uv/vis detection. Unfortunately, I could not find any living oysters in which I firstly intended to measure the PAH content in the study area. NPTHL and ANCPL were the major dominant PAH compounds in mussels living in the intertidal zone of Kori, Korea, and DahA, BbF, BaP were the next dominant PAH group in mussels in the study area. The mean concentrations of 15 PAH in mussels ranged from 3.2 to 1,680 ppb(mean 105$\pm$60.5 ppb). Compared with other studies world over, the concentrations of carcinogenic PAHs were relatively low in mussels in the study area, even though total PAH content was rather high. According to N/P(Naphthalene/Phenanthrene) ratio(147) and the ratio of 2∼3 ring to 3∼5 ring PAHs(58∼90 %) in mussels in the study area, I expect that the major source of PAHs in this study area is rather fresh petroleum-derived. This study presents preliminary data for the PAH levels in mussels from the intertidal zone of Kori, and the data will hopefully be utilized for the assessment of oil pollution in the East Sea, Korea.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.158-161
• /
• 2006

Superconducting YBCO films were successfully fabricated by MOD process using chemically modified precursor solution. In this study, a chemically modified precursor solution for MOD processing was synthesized using metal-organic salts and organic additives. It was shown that crack-free and uniform precursor films were formed after calcination in humidified Oxygen atmosphere. Less than 3 hours are required to finish the calcination process. XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of precursor films. Furthermore, YBCO films without any secondary phases were successfully fabricated after annealing in wet $Ar/O_2$ atmosphere. The YBCO film prepared on a $LaAlO_3$ single crystal substrate ($10mm{\times}10mm$) gives transport $I_c$ of 10A at 77K. This chemical modification approach is a possible candidate for improving MOD-processing of YBCO coated conductor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.9
• /
• pp.776-780
• /
• 2009

In this study, the opto-electric properties of EL devices with PMN dielectric layer with variation of firing tempereature were investigated. For the PMN dielectric layer process, the paste was prepared by optimization of quantitative mixing of PMN powder, $BaTiO_3$, Glass Frit, $\alpha$-Terpineol and ethyl cellulose. The EL device stack consists of Alumina substrate ($Al_2O_3$), metallic electrode (Au), insulating layer (manufactured PMN paste), phosphor layer (ELPP- 030, ELK) and transparent electrode (ITO), which is well structure as a thick film EL device. The phase transformation properties of PMN dielectric with various firing temperatures of $150^{\circ}C$ to $850^{\circ}C$ was characterized by XRD. Also the opto-electric properties of EL devices with different firing temperature were investigated by LCR meter and spectrometer. We found the best opto-electric property was obtained at the condition of $550^{\circ}C$ firing which is 3432.96 $cd/m^2$ at 1948.3 pF Capacitance, 40 kHz Frequency, 40% Duty, Vth+330 V voltage.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Coupled systems mechanics
• /
• v.1 no.2
• /
• pp.205-217
• /
• 2012

A smart beam made of magneto-electro-elastic (MEE) material having piezoelectric phase and piezomagnetic phase, shows the coupling between magnetic, electric, thermal and mechanical under thermal environment. Product properties such as pyroelectric and pyromagnetic are generated in this MEE material under thermal environment. Recently studies have been published on the product properties (pyroelectric and pyromagnetic) for magneto-electro-thermo-elastic smart composite. Hence, the magneto-electro-elastic beam with different volume fractions, investigated under uniform temperature rise is the main aim of this paper, to study the influence of product properties on clamped-free boundary condition, using finite element procedures. The finite element beam is modeled using eight node 3D brick element with five nodal degrees of freedom viz. displacements in the x, y and z directions and electric and magnetic potentials. It is found that a significant increase in electric potential observed at volume fraction of $BaTiO_3$, $v_f$ = 0.2 due to pyroelectric effect. In-contrast, the displacements and stresses are not much affected.