• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2016

After 2017 years, BWMS units must be installed in the existing ship as well as the new ship by the ballast water management convention. Software tools that can help automatically searching for BWMS installation space to avoid pipes and equipment in the engine room of the existing ship will be very useful in the BWMS layout design. In this study, voxel representation of scanned data is generated first to search space efficiently. Simplified voxel models of each unit are prepared to be located in the engine room space as well. Distance between connected models is calculated through the arrangement direction and position of each model. Sums of distance between connected models are compared for the optimal configuration. It is assumed that the sum of distance between connected models depicts the pipe usage. The proposed method can save the time needed for BWMS installation design and allows optimal configuration of BWMS units.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.576-585
• /
• 2020

This study quantitatively investigated the increase in ballasting time through numerical calculations when an ultraviolet (UV) ballast water management system (BWMS) is installed on an existing vessel. The calculation results indicate that the ballasting time of a gas carrier having 55,000 dead weight tonnage was 2.152 hours without installation of the UV BWMS and implementation of a flow control function. Ballasting time increased by 14.2% after installing the UV BWMS, and it increased by 20.4% with both its installation and implementation of a flow control function. If actual conditions are taken into account, ballasting time after installing the UV BWMS is estimated to increase by at least 30% compared with current ballasting time. Therefore, when concerned parties select a UV type BWMS, it is advisable for them to minimize ship operation losses from an increase in ballasting time by considering the capacity of the actual ballast pumps on board and the flow energy loss of the UV BWMS. Additionally, it is recommended that a BWMS with larger capacity, larger pipes, and pipes with inside coatings be used to minimize the increase in ballasting time after installation of the BWMS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.483-492
• /
• 2020

In this study, we compared and analyzed the Revealed Comparative Advantage (RCA) and Trade Specialization Index (TSI) based on ballast water management systems (BWMS) trade data, which are related to the International Maritime Organization (IMO) Ballast Water Management Convention to suggest the current status of Korea's industrial competitiveness and suggest future development directions for the BWMS industry. As international interest in eco-friendly vessels is expanding, the IMO is engaged in dramatic discussions and agreement-making related to marine emissions of pollutants from ships. IMO member states that must implement this convention are striving to develop technology and secure industrial competitiveness as major industries in the eco-friendly shipping sector, with the BWMS industry experiencing a high market entry barrier and the possibility of the leading market entrants gaining leadership. The Republic of Korea accounts for 17 (approximately 38 %) of the 45 BWMS that received final approval as of October 2019. Based on trade data relating to product codes HS842219, HS84212, and HS89, the RCA index and TSI were calculated and compared. The findings revealed that the Republic of Korea has relative inferiority compared to countries such as Germany and Denmark. Despite this, Korea's favorable industrial environment, which includes several IMO-approved BWMS technologies and the possession of domestic certification institutions, is likely to strengthen its competitiveness in the BWMS market.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2016

Ballast water in ship operation is essential for a safe voyage. However ballast water can contain unwanted organisms that are the cause of disturbing the ecosystem by the transfer of potential invasive species. To prevent the destruction of the environment, the International Convention for the Control and Management of Ship's Ballast Water and Sediments(BWM Convention) was adopted in 2004. BWMS (Ballast Water Management System) has been developed to prevent the transportation of organisms to another region in order to fulfill the requirements IMO (International Maritime Organization) regulations. Nowadays there are about 50 approved Ballast Water Management Systems of various types globally. The most common BWMS types are UV (Ultra Violet), Electrolysis and Ozone. Among these types there are many difficulties in determining the optimum type of BWMS which can be suitable for the user and designer's requirements. The main objective of this research is to select the best BWMS type by using AHP. To apply AHP, the most important criteria for the BWMS development are derived by users and designers. From our results, we can give a guide BWMS type to the developers of BWMS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.426-433
• /
• 2020

This study aimed to compare the pretreatment methods of phytoplankton for type approval of the Ballast Water Treatment System (BWMS). The International Maritime Organization (IMO) and the United States Maritime Police (USCG) use two different test methods for this purpose. To compare the two methods, a test for concentration and non-concentration was performed with cultured and natural phytoplankton, and samples from the land-based BWMS test. The extent of damages caused by the process of concentration varied between cultured and natural species, indicating differences depending on the physiological and morphological characteristics of the species. In the land-based test, in the control water with a high biological population, the number of non-concentrated samples was about twice as high as that of the concentrated samples. There was no distinct difference between the two methods in the treated water with a low biological population. Thus, although there is a difference between concentration and non-concentration for phytoplankton sampling, the concentration method can be applied as a method of evaluating BWMS performance. However, a method for evaluating whether live species in treated water may be lost or damaged during the concentration process of sampling should be developed and validated.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.72
• /
• pp.185-210
• /
• 2016

The climate change has become one of the most important global issues that require global responses. As one of the leading contributions to climate change, greenhouse gas emissions and Ballast Water Management have attracted growing attention from the international community. The International Maritime Organization (IMO) received its mandate to regulate International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004. The convention requires that every vessel must be equipped Ballast Water Management System (BWMS) in 2017. Based on this situation, this study aims to analyze the present state and data from the exports of BWMS(HS842121). The results show that as the most leading country in the field, Germany has the largest market share (14.33%), Revealed Comparative Advantage (RCA) index 1.76, and Trade Specialization Index (TSI) 0.636 in the world. The two other leading countries such as Denmark and Netherlands follows the ability of Germany. The Korean market share of HS842121 shows market share (5.98%) which is a bit bellow high compared to other countries. However the RCA index (1.85) presents the state of comparative advantage. In addition, Korea's TSI index (0.453) indicates that it is in the state of export specialization. The Korean BWMS and Shipbuilding industry maintain the state of export specialization. They are also in the state of import specialty. For Korea to raise its export competitiveness and to ensure shipbuilding competitiveness, it is necessary to intensify supporting systems and related policies.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.236-236
• /
• 2017

Effluent treated by an NaDCC injection method in Ballast water management system (BWMS) contains reactive chlorine species and disinfection by-products (DBPs). In this study, we conducted whole effluent toxicity (WET) testing and ecological risk assessment (ERA) to investigate its ecotoxicological effects on marine environment. WET testing was carried out for four marine pelagic and freshwater organisms, i.e., diatom Skeletonema costatum, Navicula pellicuosa, chlorophyta Dunaliella tertiolecta, Pseudokirchneriella subcapitata, rotifer Brachionus plicatilis, Brachionus calyciflorus and fish Cyprinodon variegatus, Pimephales promelas. The biological toxicity test revealed that algae was the only biota that showed apparent toxicity to the effluent; it showed no observed effect concentration (NOEC), lowest observable effect concentration (LOEC) and effect concentration of 50% (EC50) values of 25-50%, 50-100% and >100%, respectively, at three water condition, but did not show any significant toxicities on other biota. Meanwhile, chemical analysis revealed that the BWMS effluent contained total residual oxidants (TROs) below $0.03{\mu}g/L$ and a total of 25 DBPs such as bromate, volatile halogenated organic compounds (VOCs), halogenated acetonitriles (HANs), halogenated acetic acids (HAAs), chloropicrin and Isocyanuric acid. Based on ERA, the 25 DBPs were not considered to have persistency, bioaccumulation and toxicity (PBT) properties. The ratio of predicted environmental concentration (PEC) to predicted no effect concentration (PNEC) of the other DBPs did not exceed 1 for General harbor environment. However, four substances (Isocyanuric acid, Tribromomethane, Chloropicrin and Monochloroacetic acid) were exceed 1 for Nearship environment. But observed toxicity in the test water on algal growth inhibition would be mitigated by normal dilution factor of 5 applied for nearship exposure. Thus, our results of WET testing and ERA showed that the BWMS effluent treated by NaDCC injection method would have no adverse impacts on marine environment.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.88-101
• /
• 2013

The International Convention for the Control and Management of Ship's Ballast Water and Sediments was adopted at 2004 and then various BWMS (ballast water management system) have been developed. In this study, WET (whole effluent toxicity) test with algae (diatom) Skeletonema costatum as primary producer, invertebrate (rotifera) Brachionus plicatilis as 1st consumer and fish (olive flounder) Paralichthys olivaceus as predator, chemical analysis and ERA (environmental risk assessment) were conducted to assess the unacceptable effect on marine ecosystem by emitting the discharge water treated with AquaStar$^{TM}$ BWMS using electrolysis as main treatment equipment for removing the marine organisms in the ship's ballast water. The most sensitive test organism on discharge water treated with AquaStar$^{TM}$ BWMS was S. costatum that gave the NOEC value of 25.00%, LOEC value of 50.00% and 72hr-$EC_{50}$ value of 69.97% from WET test result for 20 psu salinity treated discharge water. NOEC and LOEC value of B. plicatilis and P. olivaceus exposed at 20 psu salinity treated discharge water were 50.00% and 100.00%, respectively. In the chemical analysis results, total number of substances produced by AquaStar$^{TM}$ BWMS was 18 which were bromate, 7 volatile halogenated organic compounds, 7 halogenated acetic acids, 3 halogenated acetonitriles and chloropicrin. Eighteen substances did not consider as persistence and bioaccumulative chemicals. Uncertainty of toxic property of 18 substances was high. PECs of 18 substances calculated by MAMPEC model were ranged from $4.58{\times}10^{-4}$ to $4.87{\mu}g\;L^{-1}$, PNECs of them were ranged from $1.6{\times}10^{-2}$ to $3.2{\times}10^2{\mu}g\;L^{-1}$. And, the PEC/PNEC ratio of 18 substances did not exceed 1. Therefore, ERA for produced substances indicate that the discharge water treated with AquaStar$^{TM}$ BWMS does not pose unacceptable effect on marine life. And $EC_{50}$ value of S. costatum on discharge water treated by BWMS using the electrolysis had positive correlation with initial TRO concentration, concentration and kind & level of HAAs.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.202-202
• /
• 2012

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.179-180
• /
• 2015

운항하는 선박의 특성상 미래 상태를 반영한 예방정비는 선박의 안전한 운항과 운영비용 절감에 중요한 요인이다. 이에 본 논문에서는 선박 엔진의 세 가지 주요 베어링의 마모 상태를 모니터링하고 앞으로의 마모 정도를 예측하는 시스템을 개발하였다. 이 시스템은 현재의 실린더 하사점 레벨 데이터를 기반으로 앞으로의 실린더 하사점 레벨을 예측한다. 실험에 적용한 실린더 하사점 레벨 데이터는 테스트 지그를 제작하여 발생시켰고, 이 장치를 통해서 취득한 데이터를 이용하여 선박 엔진의 미래 상태를 예측하였다.