• Journal of the Korea Society for Simulation
• /
• v.2 no.1
• /
• pp.13-22
• /
• 1993

In a multiple-bus multiprocessor system in which processors and memory modulus are interconnected through system buses, time delay due to bus contention degrades system performance. In order to reduce such a problem , and optimal bus arbitration scheme and its hardware are neccessary. In this study, performaces of four arbitration schemes are analyzed and compared : fixed-priority, equal-priority, rotating-priority and round-robin priority schemes. For the study, the software simulator of a multiple-bus multiprocessor system is developed by using SLAM II. Simulation results show that, when memory sccesses are evenly distributed to all memory modulus, round-robin priority scheme provides the best performance. But when a hot spot exists, the use of the fixed priority scheme results in the shortest access time.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1601-1606
• /
• 2004

Nowadays, the bus system of a metropolitan area is improving very fast. According to the bus, commuter railways increase their competitive power. For this, trains get the mobility increasing, effective transferring system and unified information service. For the mobility increasing, commuting railway must be faster by flexible train diagram and facilities improvement. And finally, optimal commuter train, 'Liner' is needful. And for effective transferring system, it is necessary that railway station and transferring center of a city be merged. And it is needful that direct management bus by railway company and unification fare system on metropolitan region. Next, for information service system improving, the commuting railway station must be regional transportation hub at first. And it is needful that unified line map of trunk line transportation systems and regionally collective transportation system information book. Therefore, metropolitan commuting railways compete with trunk line bus and cooperate with feeder line bus, and can make optimal metropolitan public transportation systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.9
• /
• pp.70-79
• /
• 1996

Block data transfer poses a serious problem is a pipelined bus where each data transfer step is pipelined. In this paper, we describe the design and implementation of a variable data block transfer protocol for a pipelined bus of a shared-memory multiprocessor. The proposed method maintains compatibility with the existing protocol for the pipelined bus and ensures fairness and effectiveness by preventing starvation. We present flow charts of requester and responder during a block transfer in the pipelined bus that uses the proposed protocol. The proposed protocol was implemented for the TICOM-III HiPi+Bus.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.1
• /
• pp.1-5
• /
• 2001

In this paper, a new method for calculating the penalty factors of all generators including the slack bus is presented. A simple transposition of the angle reference, from the conventional slack bus to another bus where no generation exists, enables the derivation of the loss sensitivity of the slack bus. Penalty factors are obtained without any physical assumption through a simple substitution of the bus loss sensitivities. Penalty factors calculated by proposed method are not dependent on reference bus and can also be directly substituted into the general ELD equation for computing the optimal dispatch. Equations for loss sensitivities, Penalty factors and ELD are calculated simultaneously in normal power flow computation. A case study on a test system has proved the effectiveness of the proposed' angle reference transposition' method.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.459-467
• /
• 1992

This paper presents a new algorithm for the countermeasure to alleviate the line overloads due to contingency without shedding loads in a power system. This method for relieving the line overloads by line switching is based on obtaining the kine outage distribution factors-the linear sensitivity factors, which give the amount of change in the power flow of each line due to the removal of a line in a power system. There factors are made up of the elements of sparse bus reactance matrix and brach reactances. In this paper a fast algorithm and program is presented for obtaining only the required bus reactance elements which corresponds to a non-zero elements of bus admittance matrix, and elements of columns which correspond to two terminal buses of the overloaded(monitored) line. The proposed algorithm has been validated in tests on a 6-bus and the 30-bus test system.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.757-759
• /
• 1996

This paper proposes an application of artificial neural networks to the bus-bar separation in a substation for radial network operation. For the effective bus-bar operation, the insecurity index of transmission line load is introduced. For the radial network operation. the constraints of bus-bar switch is formulated in the performance function with the insecurity index. The determination of bus-bar switching is to find the states of 0 or 1 in the circuit breakers. In this paper, it is tested that the bus-bar separation of binary optimization problem can be solved by Hopfield networks with adequate manipulations.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.135-141
• /
• 2013

PURPOSES: In this study, as part of an effort to develop HUD for public transit, it is proposed that the decision of order priority of contents which will be disposed to bus drivers through HUD for public transit using AHP(Analytic Hierarchy Process) technique. METHODS: In AHP analysis method brainstorming, factor analysis, hierarchical structuring, and weighting analysis were performed by applying a classical analysis method. RESULTS: By the result of analysis it is shown that unlike car drivers, bus drivers prefer information related to bus intervals, bus stop, and door open and close to information related to vehicle running. Also, bus stop information and bus interval information were ranked as first and second place in order priority of HUD contents for public transit by experts. CONCLUSIONS: This method of selecting order priority of HUD contents for public transit can provide a basic foundation for selecting order priority of traffic information contents as well as other HUD contents.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.531-533
• /
• 2003

This study aims at discussing the future trend of the community bus and attempted to route selection by using GIS for the welfare-type community bus, which satisfies the need of elderly and physically handicapped persons in Nagasaki City. In doing so, we have conducted field survey in some sample cities of Kyushu, Japan for taking lessons from the present state analysis of community bus already operating there. As a result of the study, we have been able to identify some best possible routes for the community bus operation in Nagasaki City, which meets the requirement of the welfare community as well as of the general passengers.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.41-47
• /
• 2019

A BIS(Bus Information System) collects, processes and analyzes information such as real-time location and operation status during bus operation. And It is a system that provides valid information to citizens, drivers, traffic centers and bus companies. Transport information system sent by an each bus is collected through GPS(Global Positioning System), DSRC(Dedicated Short Range Communications), Beacon and passed to transport information center. BIS data by collected is handled and analyzed. Next, it is transmitted to citizen, drivers and bus companies in real time. The result of 5 times simulation satisfied the test criteria(error range ${\pm}10m$) with an average error range of 3.306m, and the reliability is increased. In this paper, we propose a improved location transfer component that can provide users to quicker and more accurate location information than existing BIS using GPS of smart phone. It can be seen that reliability is improved by securing improved bus position data.