• Carbon letters
• /
• v.2 no.2
• /
• pp.99-104
• /
• 2001

Partial mesophase (PM) pitch precursor was prepared from fluidized catalytic cracking-decant oils (FCC-DO) by chemical reaction in the presence of $Br_2$. The PM pitch heated-treatment at $420^{\circ}C$ for 9 h exhibited the softening point of $297^{\circ}C$ with 23% yield, and 55% anisotropic content. The PM pitch precursor was melt-spun through circular nozzle by pressurized $N_2$, stabilized at $310^{\circ}C$, carbonized at $700^{\circ}C$, $1000^{\circ}C$, and $1200^{\circ}C$. The enough stabilization introduced 16.4% of the oxygen approximately. The stacking height ($L_{c002}$) and interlayer spacing ($d_{002}$) of the as-spun fibers were 4.58 nm and $3.45{\AA}$ and the value became minimum and maximum at $700^{\circ}C$ respectively in the carbonization procedure. The tensile strength increased with an increase in the heat treatment temperature exhibiting highest value of 750 MPa at $1200^{\circ}C$ carbonization.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.148-151
• /
• 2011

We designed and fabricated aluminium gallium nitride (AlGaN)/GaN high electron mobility transistors (HEMTs) with stable reverse blocking characteristics established by employing a selective fluoride plasma treatment on the drainside gate edge region where the electric field is concentrated. Implanted fluoride ions caused a depolarization in the AlGaN layer and introduced an extra depletion region. The overall contour of the depletion region was expanded along the drift region. The expanded depletion region distributed the field more uniformly and reduced the field intensity peak. Through this field modulation, the leakage current was reduced to 9.3 nA and the breakdown voltage ($V_{BR}$) improved from 900 V to 1,400 V.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.12
• /
• pp.1355-1359
• /
• 1998

The treatment of 1,1-bis(phenylthio)-2,2,3,3,3-pentafluoropropylbenzene (1) with 2 equiv. of phenyllithium in THF at -78 ℃ resulted in the formation of isomeric mixture (70: 30) of trifluoromethylated 1,2-diphenylvinyl sulfide 2 in 87% yield. The further oxidation of 2 with m-chloroperbenzoic acid in methylene chloride afforded isomeric mixture (70:30) of trifluoromethylated 1,2-diphenylvinyl sulfone 3 in 87% yield. When 3 was reacted with carbon nucleophiles such as methyllithium, n-butyllithium, phenyllithium and lithium octylide, the corresponding addition-elimination adducts 4, 5, 6 and 7 were obtained in moderate to good yields. The reaction of 3 with 4 equiv. of tributyltin hydride in benzene at reflux temperature provided isomeric mixture (90 : 10) of trifluoromethylated 1,2-diphenylvinyl stannane 8 in 41% yield. The reaction of 8 with methyllithium in the presence of trimethylsilyl chloride gave isomeric mixtures (90: 10) of trifluoromethylated 1,2-diphenylvinyl silane 9 in 88% yield. Finally, the treatment of 8 with Br2 and 12 resulted in the formation of isomeric mixtures (90: 10) of trifluoromethylated 1,2-diphenylvinyl bromide 10 and iodide 11 in 72% and 90% yields, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.12
• /
• pp.5063-5069
• /
• 2016

Background: Breast cancer is the most common cancer among women in most countries of the world. It is ranked first in females in Morocco (accounting for 33.4% of the total cancer burden) and more than 60% of cases are diagnosed at stage III or IV. During the last decade, health-related quality of life (HRQOL) has become an important aspect of breast cancer treatment. The objective of this study was to describe self-reported HRQOL in patients with breast cancer and to investigate its associations with sociodemographic and clinical variables. Methods: A prospective study was carried out in the main oncology centers in Morocco. Quality of life was measured using the Moroccan Arabic versions of the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire C 30 (EORTC QLQ C30) and the Breast Cancer-Specific Quality of Life Questionnaire (EORTC QLQ-BR23). Statistical analyses were performed using descriptive statistics and multivariate analyses. Results: A total of 1463 subjects were included in the study, with a mean age of 55.6 (SD. 11.2) years, 70% being married. The majority had stage II (45.9%) and a few cases stage IV (12.9%) lesions. The participants' global health mean score was 68.5 and in "functional scales", social functioning scored the highest (Mean 86.2 (SD=22.7)). The most distressing symptom on the symptom scale was financial difficulties (Mean 63.2 (SD=38.2)). Using the disease specific tool, it was found that future perspective scored the lowest (Mean 40.5 (SD=37.3)). On the symptom scale, arm symptoms scored the highest (Mean 23.6 (SD=21.6)). Significant mean differences were noted for many functional and symptom scales. Conclusion: Our results emphasized that the general HRQOL for our study population is lower than for corresponding populations in other countries. This study provided baseline information on the quality of life for a large sample of Moroccan women diagnosed with breast cancer.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.227-234
• /
• 2003

Silicone composites for high voltage insulator (HVI SC) were prepared by adding aluminum trihydrate(ATH) treated by surface treatment agent to base silicone compound at the ratio oi 100:20, 100:40, 100:60, 100:80, and 100:100, respectively And also, ATH was treated by various surface treatment agents, such as stearic arid, acryl silane, and vinyl silane under compounding process. Mechanical properties and electrical properties were investigated for the various contents of ATH and surface-treatment agents. Mechanical properties such as tensile strength, elongation, and tear strength decreased as the load of ATH increased. Volume resistivity, AC break down strength, and tracking resistance for HVI SC containing ATH treated by vinyl silane were better than those for HVI SC containing ATH treated by other surface treatment agents, such as stearic acid and acryl silane. Polymer-filler interaction of silicone composites according to surface treatment agents was studied by measuring bound rubber contend(BR). From the experimental results, BR of silicone composite containing ATH treated with vinyl silane was higher than that of the others. The degree of rule for silicone composite was investigated using Rheometer. Maximum torque of silicone composites contaning ATH treated with vinyl silane was higher than that of silicone composite contaning ATH treated with other surface agents.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.42-47
• /
• 2019

In this study, the effects of surface treatment of bamboo fiber on the physical properties of polypropylene(PP)/glass fiber(GF)/Bamboo fiber(BF) composite for engine cover were investigated. PP, GF and BF were fixed at 40%, 40% and 20% and the surface of bamboo fibers were treated to 0.5, 1.0 and 2.0% as an acid and alkali solution. PP/GF/BR composites using surface treated bamboo fibers were prepared and their tensile strength, bursting strength and impact strength were measured by universal testing machine(UTM). The composites with alkali treated bamboo fiber showed better mechanical properties than the acid treated composites. It was checked that the optimum alkali content was at 1.0% from the results of mechanical properties. The effect of surface treatment on the mechanical properties was confirmed by SEM images of fractured surface.

• Korean Journal of Microbiology
• /
• v.17 no.3
• /
• pp.97-130
• /
• 1979

Many industrial processes those employ bacteria are subjected to phage infestations. In L-glutamic acid fermentions using acetic acid, the phage infestations of the organisms have been recently recognized. In efforts to elucidate the sources of phage contamination involved in the abnormal fermentation, a series of study was conducted to isolate the phages both from the contents of abnormally fermented tanks and the soil or sewage samples from the surroundings of a fermentation factory, to define major charateristics of the phage isolates, and finally to determine the correlation between the phage isolates and temperate phages originating from the miscellaneous bacterial species isolated from the soil or sewage samples. The results are summarized as follows; 1) All phages were isolated from the irregular fermentation tanks and soil or sewage samples, and they were designated as phage PR-1, PR-2, PR-3, PR-4, PR-5, PR-6, and PR-7, in the order of isolation. These PR-series phages were proved to be highly specific for the variant strains of Br. lactofermentum only, namely, phage PR-1 and PR-2 for Br. lactofermentum No. 468-5 and phage PR-3~PR-7 for Br. lactofemrentum No. 2256. By cross-neutralization test, the 7 phagescould be subdivided into 3 groups, i. e., phage PR-I and PR-2 the first, phage PR-3, PR-4, PR-5, PR-6 the second, and the phage PR-7 the third. 2) The 7 phages were virulent under the experimental conditions. They produced plaques with clear and relatively sharp margins without distinct halo. The mean sizes of plaques were 1.5mm in diameter for phage PR-1 and PR-2, and 1. Omm for phages PR-3~PR-7. Double layer technique modified by Hongo and described by Adams, was applied to assay of the PR-series phages. The factors influencing the plaques were as follows;young age cells of host bacteria cultured for 3-6 hours represented the largest number and size, optimum was pH 7.0, incubation temperature was $30^{\circ}C$, and agar concentration and amount of overlayer medium were 0.6% and 0.2ml, respectively. 3) PR-series phages were stable in 0.05M tris buffer and 0.1M ammonium acetate buffer solution. The addition of $5{\times}10^{-3}M$ magnesium ion effectively increased the stability. Thermostability experiments indicated that PR-series phages were stable at the teinperture between $50^{\circ}{\sim}55^{\circ}C$ in nutrient medium, $45^{\circ}{\sim}50^{\circ}C$ in buffer solution. However, the phages mere completely inactivated at 603C and 65$^{\circ}$C within 10 minutes. The phages were stable at the range of pH6~9 in nutrient medium and of pH 8-9 in buffer solution, respectively. Exposure of the phages to UV for 25, 60 and 100 seconds resulted in the complete loss of infectivily, respectively. 4) Electron microscopy showed that PR-series phage particles exhibited rather similar morphology, differing in the size All of PR-series phages had a multilateral head and had a simple long tiil about three to five times long as compared with head. By the size, phage PR-1 and PR-2, PR-3, PR-4, PR-5, and PR-6 and PR-7 were classified into same groups, respectively. The head and tail size of phage PR-1, PR-5, PR-5(T) and PR-7 were 85nm, 74nm and 235nm and 350mm, and 72nm and 210nm, respectively. 5) Nucleic acids of PR-series phages were double stranded DNA. The G+C contents of phage PR-1, PR-5 and PR-7 were 56.1, 52.9 and 53.7, respectively. The values of G+C contents derived from the $T_m$ were in agreement with the chemically determined values. 6) PR-series phages effectively adsorbed on their host bacteria at the rate of more than 90% during 5 min. K value for phage PR-1, PR-5 and PR-7 were calculated to be $6{\times}10^9 ml$ per minute, respectiveky. The pH of the medium did effect adsorption rate, but both temperature and age of host cells did not. Generally, optimum adsorption condition of phages seemed to be almost same as optimum growth conditions of host bacteria. 7) In one-step growth experiments, the latent periods at $30^{\circ}C$ for PR-1, and PR-7 were about 70, 50 and 55 min, respectively. The corresponding average burst size was 200, 70 and 90, respectively. Lpsis period according to the multiplicity of infection and a phage series. In case of m. o. i. 100, strain No. 2256 (PR-5) and No. 468-5(PR-1) failed to grow and turbidity decreased after 50 and 70min, respectively. 8) In the lysate of a plaque purified phage PR-5 infected bacteria, there observed 2 types ofphage particles, i. e., phage PR-5 and PR-5 (T) of similar morphology but differing at the length of phage tail, and phage tail like particles. The phage taillike particles could be divided into 4 types by the length. Induction experiments of Br. lactofermentum with UV irradiation, mitomycin C or bacitracin treatment produced neither phage PR-5 (T) or phage tail-like particles. 9) No lysis occured when the growth of 7 strains of miscellaneous bacteria, isolated from soil and sewage samples, were inoculated with either phage PR-5 (T) or phage tail-like particles the inoculation of phage PR-5 pellet resulted in the growth inhibition of the orgainsms in the spot test. The lysates obtained from 3 miscellaneous soil derived bacteria following mitomycin C treatment the growth of Br. lactofermentum, but did not lyze the bacterium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.584-590
• /
• 2012

Dried $Compositae$ flowers have traditionally been used for the treatment of anti-inflammatory and anti-oxidative stress in Korea. This paper investigates the effects of $Compositae$ extracts on the inhibition of proliferation and apoptosis of human gastric cancer AGS cells, human breast cancer MDA-MB-231 cells, and SK-BR-3 cells. The proliferation of AGS cells, MDA-MB-231 cells, and SK-BR-3 cells were determined by MTT assay. Several $Compositae$ extracts inhibited proliferation of AGS cells, MDA-MB-231 cells, and SK-BR-3 cells in a dose-dependent manner. To assess the apoptosis of $Compositae$ extracts, the nuclei of MDA-MB-231 cells were stained with DAPI. The presence of chromatin condensation in the $Compositae$ extract-treated cells was detected on a fluorescent microscope (${\times}200$). We conducted Western blot analysis of changes in Bcl-2, Bax, and p53 protein expression levels. Apoptosis by $Chrysanthemum$ $zawadskii$ subsp. coreanum, $Chrysanthemum$ $zawadskii$ var. $tenuisectum$ and $Rudbeckia$ $laciniata$ var. $hortensis$ treatment created a decrease in Bcl-2 expression, whereas the expression of Bax and p53 were increased. These results indicate that $Chrysanthemum$ $zawadskii$ $subsp.$ $coreanum$, $Chrysanthemum$ $zawadskii$ var. $tenuisectum$ and $Rudbeckia$ $laciniata$ var. $hortensis$ inhibit breast cancer cell growth through the induction of apoptosis.

• Journal of Yeungnam Medical Science
• /
• v.25 no.1
• /
• pp.31-40
• /
• 2008

Background/Aims : Entecavir is a synthetic nucleoside analogue, cyclopentyl guanine nucleoside, which has a potent antiviral effect and the least viral breakthrough in hepatitis B virus (HBV) replication. Entecavir has been available in Korea since 2007 but there are few reports on its effects. The aim of this study was to evaluate the virological response (VR) and biochemical response (BR) to entecavir in HBV patients at 3, 6 and 9 months after treatment with entecavir. Materials and Methods : Thirty-three chronic hepatitis B patients who took entecavir for at least 9 months were enrolled. We investigated VR and BR by retrospectively reviewing medical records. Patients who satisfied the following criteria were chosen: 1) initial alanine aminotransferase (ALT) levels = 1.5upper limit of normal (ULN) and 2) initial HBV DNA levels = $5\;log_{10}\;copies/ml$. We measured ALT levels every 3 months until month 9. HBV DNA was measured every 2 or 3 months by polymerase chain reaction (PCR) method. Results : Most patients taking entecavir showed good BR (ALT < 40 IU/L). The BR rates were 61%, 73% and 67% at months 3, 6 and 9, respectively. VR (HBV DNA < $5\;log_{10}\;copies/ml$ or 2 log lower than initial HBV DNA) rates were 82%, 91% and 91% at months 3, 6 and 9, respectively. Undetectable HBV DNA (HBV DNA < 4 log10 copies/ml) rates were 49%, 73% and 85% at months 3, 6 and 9, respectively. Two patients presented with virological breakthrough without adverse effects until month 9. Conclusions : Entecavir showed good BR and VR from month 3 and these effects continued through the 9-month observation period. This suggests that entecavir is also a good choice for the first line treatment of chronic hepatitis B (CHB). Further studies are needed to determine the long-term efficacy and drug resistance of entecavir in Korean CHB patients.

• Journal of the Korean Society of Radiology
• /
• v.8 no.5
• /
• pp.217-223
• /
• 2014

The aim of this study is evaluation of dose distribution on radiation therapy planning system with the CT image of high-density material inserted phantom. Gammex 467 Tissue Characterization Phantom is used to acquire an image similar to the human tissues and insert a Titanium to generate metal artifact. The acquired images were reconstructed with Metal Artifact Reduction for Orthopedic Implants (O-MAR). By using the treatment planning system, the volume was analyzed and dose distribution was extracted. Photon dose distribution in linear accelerator was measured by the $MapCHECK^{TM}$ and compared with planned and measured dose distributions. In result of the comparative analysis, when artifact is generated by Titanium, The volume applied O-MAR was increased 6.8% to BR-12 Breast and 40.2% to LV 1 Liver. After O-MAR was used, Dose distribution was higher 1.4 to 1.6% than before. Consequently, The artifact caused by metal objects should be removed if possible, and after that used in the radiotherapy treatment plan can be considered to reduce errors.