• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.362-370
• /
• 2005

Copolymers (HSA-98-20, HSA-98-0, HSA-98+20) which are acrylic resin containing 80% solid content were synthesized by the reaction of monomers, including methyl methacrylate, n-butyl acrylate, and 2-hydroxyethyl acrylate with a functional monomer, such as acetoacetoxyethyl methacrylate (AAEM), which may improve in cross-linking density and physical properties of films. The physical properties of prepared acrylic resins, containing AAEM, are as follows : viscosity, $1420{\sim}5760cps$ ; number average molecular weight, $2080{\sim}2300$ ; polydispersity index, $2.07{\sim}2.19$ ; conversions, $88{\sim}93%$, respectively. To prepare acryl resins, four kinds of initiators including ${\alpha},{\alpha}'-azobisisobutyronitirile$ (AIBN), di-tert-butyl peroxide (DTBP), t-amylperoxy-2-ethyl hexanoate (APEH), benzoyl peroxide (BPO) were used. The viscosity of the acrylic resins prepared with these initiators was increased in the order of DTBP>APEH>AIBN>BPO. APEH was proved as a suitable initiator in this study. Shear rates of acrylic resins were constant in respect to viscosity. From these results, it would appear that the resins have Newtonian flow characteristics and good workability.

• 공업화학
• /
• 제1권2호
• /
• pp.232-239
• /
• 1990

${\gamma}$-Glycidoxy propyl trimethoxy slilane, CTBN rubber (carboxyl terminated butadiene acrylonitrile rubber), GMA(glycidyl methacrylate) 등을 TEA(triethylamine) 및 BPO(benzoyl peroxide) 존재하에 결정성 실리카의 표면에 단계적으로 반응시켜 2.5~5.8%(중량%)의 피복율을 가진 표면처리 실리카를 제조하였다. 이것을 전체혼합물 중 0~60%(중량%)가 되도록 에폭시 수지 및 MTHPA (methyltetrahydrophthalic anhydride)와 혼합한 후 경화시켜 굴곡특성 및 열적특성을 시험하였다. 시험결과, 충전재 함량 35~55%(중량%)에서, 실란/고무 또는 실란/고무/비닐로 처리된 실리카를 충전한 것은 에폭시 수지에 고무를 직접 3% 혼합하고 여기에 표면 처리하지 않은 실리카를 충전한 것에 비하여 굴곡강도와 Tg는 각각 평균 25%, 13% 높은 값을, 굴곡탄성율은 5% 낮은 값을 나타내었다.

• 공업화학
• /
• 제1권1호
• /
• pp.63-72
• /
• 1990

결정성 실리카의 표면을 아민(TEA, CTMAB, BETAC) 및 과산화물(BPO) 촉매를 사용하여 실란(A 187), 액상고무(CTBNx8), 비닐단량체(AA, MMA, 2-HEA, GMA) 등으로 차례로 반응시켜 새로운 표면처리 실리카를 제조하였다. 표면처리 효과를 검토하기 위하여 실리카를 에폭시 수지에 전체 혼합물 중 0~36%(부피 %)의 범위로 혼합하여 혼합 점도 및 침전율의 변화를 시험하였다. 실험 결과 표면 피복량은 반응 촉매의 양과 종류에 의존하였으며, 촉매량 0.1~20%에서 실리카에 대한 피복량은 2.5~5.8% 범위의 값을 표시하였고, 실리카의 표면이 실란/고무, 실란/고무/비닐로 점차 처리됨에 따라서 무처리물이나 실란처리물에 비하여 점도가 저하되었으며, 침전율도 낮은 값을 표시하였다. 표면처리 상태는 처리제의 종류에 따라서 각기 다른 특성을 나타내었다.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.216-222
• /
• 2012

본 연구에서는 p-hydroxybenzoic acid(HBA)와 acryloyl chloride(AC)의 반응에 의해 방향족 카르복실기를 가지는 아크릴 단량체 p-acryloyloxybenzoic acid(ABA)를 합성하였으며, 합성된 ABA 단량체와 benzoyl peroxide(BPO) 개시제를 이용하여 톨루엔 용매 하에서 에틸렌-프로필렌-디엔 고무(EPDM)에 그라프트 공중합 시켰다. 합성된 단량체 ABA와 그라프트 공중합체 EPDM-g-ABA의 구조는 FT-IR, $^1H$-NMR 및 $^{13}C$-NMR 분광기로 분석하였으며, 개시제 함량과 단량체의 농도가 증가할수록 그라프트율이 높아지는 것을 확인하였다. 그라프트율이 증가할수록 인장강도와 영구압축줄음율과 같은 기계적 특성은 향상되었다. 또한 유리전이온도($T_g$와 초기 열분해 온도는 약간씩 상승하였다.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1909-1918
• /
• 2014

In this experiment no solvent based polyurethane(PU) adhesives were prepared with the polyol, isocyanate, dioctyl phthalate(DOP), 2-hydroxyethylacrylate(2-HEA) and other acrylate monomers. The softenening point of the PU adhesives measured by Ring & Ball method were examined in the present study. And adhesion strength and mechanical properties such as tensile strength and 100% modulus of the PU adhesives were evaluated by Universal Test Machine. The experimental results showed that increase of both DPE-41, benzoylperoxide(BPO) and toluene diisocyanate(TDI) increased softenening point, adhesion strength, tensile strength and 100% modulus. However as DOP content increased sofenening point, adhesion strength decreased and tensile strength, 100% modulus also decreased.

• 한국의류학회지
• /
• 제19권6호
• /
• pp.946-954
• /
• 1995

The purpose of this study is to modify the hydrophobic property and dyeability of polyethylene terephthalate fiber. Methacrylic acid (2nA) was graftpolymerized with benzoyl peroxide (BPO) as initiator onto polyethylene terephthalate fabrics. The results were as follow; 1. Graft-polymerization exhibited maximum graft ratio at a temperature of 100"C. 2. The polymer was gradually grafted in great amount to the surface of MA-g-PET as graft ration increase; with the cross-section examination of MA-g-PET, it was discovered that graft-polymeriation had also taken place inside the textile core. 3. Dyes absorption of basic dyes and disperse dyes was improved as craft ratio increase; with resistance to laundering, the former showed grade 3-4 and the latter showed grade 5.de 5.

• Elastomers and Composites
• /
• 제24권4호
• /
• pp.265-275
• /
• 1989

The graft copolymerizations of acrylonitrile (AN) and methyl methacrylate (MMA) onto chloroprene rubber (CR) were carried out with benzoyl peroxide(BPO) as an initiator. The effect of solvent, mole ratio of AN to MMA, reaction time and temperature, and initiator concentration on graft copolymerization were examined. It was observed that the grafting efficiency increased as increasing mole ratio of AN to MMA. the graft copolymer, acrylonitrile- CR-methyl methacrylate (ACM), was identified by infrared spectroscopy and morphology. Thermal stability of ACM was found to be improved when compared with those of CR.

• 한국의류학회지
• /
• 제10권2호
• /
• pp.79-84
• /
• 1986

Methacrylic acid was graft polymerized with benzoyl peroxide in itiator onto the commercial PET film. Graft polymerization was carried out in emulsion, which consisted of BPO (1), chlorobenzene(8) as swelling agent, tween 80(1) and sodium lauryl sulfate(1) as emulsifier and water(1,000). Original PET film has poor reactivities and, so the film preswdled with benzyl alcohol($150^{\circ}C$, 1hr) was also examined. The graft yield of PET film was increased with reaction temperature and monomer concentration. The graft yield of preswelled PET film was higher than that of no-treated PET film. Moisture regain was linearly increased with graft yield. DSC thermodiagram showed the Tm of grafted PET film was same as that of original PET film. Grafted PET film was dyed with methylene blue solution. The photograph of the cross section showed that grafting was occured not at the center but near surfaces.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.28-33
• /
• 2003

Thermal decomposition characteristics of ethyl methacrylate (EMA) and Styrene (St.) copolymer was investigated with synthesis at 8$0^{\circ}C$ in a continuous stirred tank reacto (CSTR) using toluene and benzoyl peroxide(BPO) as solvent and initiator, respectively. The thermal decomposition was considered to be side scission at below 30$0^{\circ}C$ and estimated 2nd-order reaction kinetics of EMA/St. copolymer. The activation energies of decomposition on this copolymers were in the ranges of 38-43 kcal/mol for EMA/St. and a good additivity rule was observed in each composition. The thermogravimetric trace curves agreed well with the theoretical calculation.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.205-212
• /
• 2009

Solution copolymerization of Styrene(St.) with 2-Hydroxypropylacrylate(2-HPA) was carried out with Benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a batch reactor. Reaction volume and reaction time were 0.3 liters, 8 hours respectively. The time to reach steady state was about the six time. The monomer reactivity ratios, $r_1$(St.) and $r_2$(2-HPA) were determined by both the Kelen-Tudos method and the Fineman-Ross method ; $r_1$(St.)=0.376(0.330), $r_2$(2-HPA)=0.408(0.778). The activation energy of thermal decomposition was in the range of $33{\sim}55kcal/mol$.