• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.15-20
• /
• 1996

이 논문에서는 육방형 노심 해석용으로 제작된 코드인 HEXFEM의 연소계산 결과의 정확성을 VVER-1000 연소계산 벤치마크 문제를 통하여 검증하였으며 집합체내 연소도 구배효과에 따른 오차를 분석하였다. 집합체내 연소도 구배효과를 고려했을 때 집합체내 균일한 연소도를 가정했을 때보다 오차가 현저히 감소하였으며 Cubic Option의 결과는 제어봉이 삽입된 1주기초(BOC1 ARI), 1주기초(BOC1), 1주기말(EOC1), 2주기초(BOC2)에 대해 집합체별 상대출력 오차가 최대 0,4%로 매우 정확한 결과를 얻었고 Quadratic Option외 결과도 최대 2.0%로 비교적 정확한 결과를 얻었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.405-410
• /
• 2006

Future GNSS signal using BOC modulation brings the advantages of positioning accuracy and multipath rejection. However, the BOC signal has an ambiguous autocorrelation function that complicates the process of acquisition. Three techniques that solve the ambiguous problem are BPSK-like, Sub Carrier Phase Cancellation, and Bump Jumping. In this paper, these methods are implemented by means of a DSP/FPGA board. Moreover, an experiment is conducted to examine and compare the performance of these techniques.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.53-58
• /
• 2013

An innovative packaging solution, Flip Chip with Copper (Cu) Column bond on lead (BOL) Enhanced Process (fcCuBE$^{(R)}$) delivers a cost effective, high performance packaging solution over typical bond on capture pad (BOC) technology. These advantages include improved routing efficiency on the substrate top layer thus allowing conversion functionality; furthermore, package cost is lowered by means of reduced substrate layer count and removal of solder on pad (SOP). On the other hand, as electronic packaging technology develops to meet the miniaturization trend from consumer demand, reliability testing will become an important issue in advanced technology area. In particular, electromigration (EM) of flip chip bumps is an increasing reliability concern in the manufacturing of integrated circuit (IC) components and electronic systems. This paper presents the results on EM characteristics on BOL and BOC structures under electrical current stressing in order to investigate the comparison between two different typed structures. EM data was collected for over 7000 hours under accelerated conditions (temperatures: $125^{\circ}C$, $135^{\circ}C$, and $150^{\circ}C$ and stress current: 300 mA, 400 mA, and 500 mA). All samples have been tested without any failures, however, we attempted to find morphologies induced by EM effects through cross-sectional analysis and investigated the interfacial reaction characteristics between BOL and BOC structures under current stressing. EM damage was observed at the solder joint of BOC structure but the BOL structure did not show any damage from the effects of EM. The EM data indicates that the fcCuBE$^{(R)}$ BOL Cu column bump provides a significantly better EM reliability.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.1
• /
• pp.45-55
• /
• 2003

The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrom-etry-selected ion monitoring (GC/MS-SIM) mode followed by two work-up methods for comparison; isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in paper samples were extracted with acetonitrile. Also, solid -phase extraction (SPE) with XAD -4 and subsequent conversion to isobutoxycarbonyl derivatives or tert.-butyldimethylsilyl derivatives for sensitive analysis with the selected ion-monitoring (SIM) mode. The SIM responses were linear with the correlation coefficient varying 0.9717 ∼ 0.9995 (isoBOC derivatization), and 0.9842 ∼ 0.9980 (TBDMS derivatization). The recoveries were 82.4 ∼ 108.8％) by area ratio of phenanthrene -d$\_$10/ vs bisphenol A-d$\^$l6/. (isoBOC derivatization and TBDMS derivatization) The range of concentrations was respectively, 0.95 ∼ 1.44 ng/g in 2,4-dichlorophenol, 1.01 ∼ 1.17 ng/g in t-butylphenol,2.17 ∼ 5.84 ng/g in pentachlorophenol, 12.68 ∼ 14.88 ng/g in nonylphenol and 30.84 ∼ 153.72 ng/g in bisphenol A.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.95-104
• /
• 1997

We synthesized the following series of 3', 5'hydroxy modified thymidine analogs to check the potential asymmetric catalytic effects. 3'-monomethylammino and dimethylaminothymidine was synthesized from thymidine via 8 step and 7 step in 38%, 20% overall yields respectively. 5'Acetyl-3'-dimethylamino thymidine was prepared from thymidine via 8 step in 40% overall yield. 5‘-TBS-3'-up-t BOC methylamino thymidine was prepared from thymidine via 6 step in 30% overall yield. 3'-acetyl-5'-t BOC amino thymidine was prepared from thymidine via 7 step in 31% overall yield.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.977-983
• /
• 2016

This paper proposes a novel code-tracking scheme to track the fine code synchronization for BOC (pn,n)-modulated global navigation satellite system signals in a repeat-back jamming environment. The correlation function of BOC (pn,n)-modulated signals has several peaks. The correlation function in the advanced offset region remains almost unchanged due to the repeat-back signals being received later than a line-of-sight signal in the same multipath signal receiving case. Additionally, the combined pseudo-random noise signal can be treated as repeat-back jamming signals, like multipath signals. In this paper, we propose a novel code-tracking scheme utilizing the advantages of using a combined pseudo-random noise signal in the advanced offset region and verify its performance through simulation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.125-129
• /
• 2006

Japan has been investigating a new satellite based positioning system called Quasi-Zenith Satellite System (QZSS). Since the improvement of positioning availability in urban area is one of the most important advantages of the QZSS, multipath mitigation is a key factor for the QZSS positioning system. Therefore, Japan Aerospace Exploration Agency (JAXA) and GNSS Inc. have commenced the R&D of a pseudolite, which transmits the next-generation signal such as BOC(1,1), in order to evaluate the effect of multipath on the new signal. A prototype BOC pseudolite was developed in 2005, and ground tests showed a capability of generating proper pseudorange. Also, preliminary flight experiments using a pseudo quasi-zenith satellite, a helicopter on which the pseudolite is installed, were conducted in early 2006, and the BOC-type correlation function was monitored in real time.

• Archives of Pharmacal Research
• /
• v.26 no.9
• /
• pp.697-705
• /
• 2003

The alkylphenols, chlorophenols, and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring (GC/MS-SIM) followed by two work-up methods for comparison: isobutoxycarbonyl (isoBOC) derivatization and tert-butyldimethylsilyl (TBDMS) derivatization. Eleven endocrine disrupting chemicals (EDCs) of phenols in biological samples were extracted with acetonitrile and then the acetonitrile layer underwent freezing filtration 6$0^{\circ}C$ for 2 hours. Solid-phase extraction (SPE) was used with XAD-4 and subsequent conversion to isoBOC or TBDMS derivatives for sensitivity analysis with the GC/MS-SIM mode. For isoBOC derivatization and TBDMS derivatization the recoveries were 92.3∼150.6% and 93.8∼108.3%, the method detection limits (MDLs) of bisphenol A for SIM were 0.062 $\mu$ g/kg and 0.010 $\mu$ g/kg, and the SIM responses were linear with the correlation coefficient varying by 0.9755∼0.9981 and 0.9908∼0.9996, respectively. When these methods were applied to mackerel samples, the concentrations of the 11 phenol EDCs were below the MDL.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.207-212
• /
• 2004

In this study, we attempted to prepare compounds with heterocyclic replacements for metabolically unstable esters of benzopyranyl indole-2-carboxylic esters, which showed good in vitro and in vivo cardioprotective efficacies possibly through the opening of mitochondrial ATP-sensitive potassium channel ($K_{ATP}$). Initially, we tried to construct indolin-2-yl-heterocycles using unprotected indoline-2-carboxylic acid, but the cyclization was proceeded with oxidation of the indoline ring to the indole, which didn't react with benzopyranyl epoxide. Thus we introduced N-Boc group to deplete the electron density of the indoline ring. We successfully prepared various indolin-2-yl-heterocycles by the cyclization of the building blocks including carboxamide, ${\beta}$-hydroxy amide, hydrazide, nitrile starting from N-Boc-indoline-2-carboxylic acid.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.220-220
• /
• 1994

출발물질로 L-tyrosine을 사용하여 요오드화, 에스테르화, N-BOC 및 0-Bn보호기화 및 N 탈보호기화를 행하여 5단계에 걸쳐 41%의 수율로 methyl 0-Bn-3-iodotyrosinate를 합성하였다. 또한 Ullmann coupling의 반응성 향상을 위해 5위치에 nilro기가 도입된 methyl 0-Bn-3-iodo-5-nitrotyrosinate를 좋은 수율로 합성하였다. 이들에 N-BOC-tyrosine을 결합시켜 대응하는 dipeptide를44% 및 39%의 수율로 각각 얻었다. 일단 dipeptide에 대해 Ullmann coupling을 행하였으나 원하는 cyclic product는 얻을수 없었다. 전년도에 이어 methyl N-BOC-0-Bn-3-hydroxytyrosinate를 합성하였다. 이로 부터 4-iodobenzaldehyde에 Ullmann coupling을 행하여 원하는 페놀성 biaryl ether를 합성하고자 하였다. 또한 $\beta$-hydroxyhomoserine의 합성을 위해 출발물질로 cis-1,4-buterdiol을 사용하여 12단계의 합성반응을 행하여 좋은수율로 원하는 화합물을 합성하였다.