• 천문학논총
• /
• 제21권2호
• /
• pp.81-86
• /
• 2006

Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in operating of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS(Personal Computer based Telescope Control System) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC(brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the user friendly GUI(Graphic User Interface).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.395-399
• /
• 2001

In this paper, various reduced parts converter topologies and control strategies for power factor correction and motor control are reviewed and systematic design methodology is developed. From this investigation, the converter topologies could be mainly categorized into cascade type and unified type. The detailed operational principles are examined and the performance comparison is derived to illustrate merits and limitations of the converters. Simulation results are provided to help the better understanding of the theoretical description and several experimental results are presented on prototype induction motor better brush less dc (BLDC) motor drives, along with cascade and unified type converters.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.219-222
• /
• 2002

There are screw, reciprocating type turbo compressor by structure in an air compressor which is essential equipment on the industrial spot. Recently, the application range of a turbo compressor tend to be wide gradually. And this type of compressor needs high speed rotation of impeller in structure so high ratio gearbox and conventional induction motor driving required. This mechanical system have results of increased moment of inertia and mechanical friction loss. Recent studies of modern turbo compressor have been applied to developing super high speed BLDC motor and driver which remove gearbox that make its size small and mechanical friction loss minimum. To accomodate this tendency, we tried to develope a super high speed motor drive system for 150Hp, 70,000rpm direct drive Turbo compressor using DSP(Digital Signal Processor) and SVPWM(Space Vector Modulation PWM) technique. The results of this specific application show that super high speed driver and controller could be implemented well with digital electronics.

• 비파괴검사학회지
• /
• 제22권5호
• /
• pp.490-499
• /
• 2002

국내 감마선투과검사용 조사장치는 1,000여대로 2,500여명의 종사자가 대부분 수동으로 원격 조작하는 실정으로 작업의 효율화와 방사선피폭 저감화를 위하여 자동 원격조작기의 사용이 요구된다. 이에 연구팀은 실무에 적합한 토크와 안전계수로부터 $54kgf{\cdot}cm$의 출력을 지닌 24V, 200W의 BLDC모터를 이용하여 $0.4{\sim}1.2m/s$ 범위의 선원 이동 속도를 조절할 수 있는 구동장치와 RF 센서로 구동 속도 조절, 광전센서에 의한 선원 위치 및 timer로 노출시간을 제어할 수 있는 무선 원격조작기를 개발하였다. 이와 같이 개발한 자동원격조작기는 AC 와 DC 겸용, 그리고 기존의 수통 원격조작기에 탈착이 가능하여 자동과 수동을 겸용할 수 있는 경제적 이점 등으로 활용도가 클 것으로 기대된다.

• 전자공학회논문지SC
• /
• 제38권2호
• /
• pp.1-11
• /
• 2001

본 논문에서는 정현파형 브러시리스 직류 전동기의 속도제어를 위해 두 개의 스위칭 라인에 의해 구성된 채터링 둔감영역을 갖는 가변구조 속도제어기를 설계한다. 슬라이딩 모드 과정중 과도상태에서 발생하는 고주파 채터링을 저주파로 한정시키기 위해 데드 존(Dead Zone) 함수의 도입을 제안하고, 정상상태에서의 채터링 감소 및 정상상태 오차를 제거하기 위해서는 제어입력에 지변이득을 적용한다. 제안된 데드 존 함수는 두 개의 스위칭 함수로 구성된 슬라이딩 영역을 표시하며 이 영역에 시스템의 상태가 존재 시 제어구조를 비례-적분 제어기로 변경하여 채터링이 발생하지 않으며 이 영역의 이탈 시만 가변구조제어를 적용하므로 채터링이 발생하게되어 과도상태의 고주파 채터링을 저주파로 감소시킬 수 있다. 설계된 속도 제어기에 대해 컴퓨터 시뮬레이션과 실험을 통하여 그 성능을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.627-630
• /
• 2004

The PID type controller has been widely used in industrial application due to its simply control structure, ease of design, and inexpensive cost. However, control performance of the PID type controller suffers greatly from high uncertainty and nonlinearity of the system, large disturbances and so on. This paper presents a hybrid fuzzy logic proportional plus conventional integral derivative controller (fuzzy P+ID). In comparison with a conventional PID controller, only one additional parameter has to be adjusted to tune the fuzzy P+ID controller. In this case, the stability of a system remains unchanged after the PID controller is replaced by the fuzzy P+ID controller without modifying the original controller parameters. Finally, the proposed hybrid fuzzy P+ID controller is applied to BLDC motor drive. Simulation results demonstrated that the control performance of the proposed controller is better than that of the conventional controller.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.612-619
• /
• 2013

This paper proposes an early diagnosis technique for the stator-turn fault (STF) in an interior permanent magnet (IPM)-type brushless DC (BLDC) motor using the impedance parameter. We have analyzed the varying characteristics owing to the STF through various experiments and the finite element method (FEM). As a result, we have presented a simple method for fault detection. This technique can be applied without requiring a fast Fourier transform (FFT) and the calculation of the negative-sequence impedance. The fault detection system works on the basis of the comparison the measured impedance with the database impedance. The variations in the characteristics owing to the STF as well as the proposed technique have been verified through the simulation and experiment.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.462-467
• /
• 2010

This paper presents the rotor shape optimization of an interior type permanent magnet (IPM) motor for a reduction of vibration and Electromagnetic Interference (EMI). The vibration and EMI in permanent magnet motors is generated by cogging torque ripple, radial force and commutation torque ripple. Consequently, in order to improve vibration and EMI, the optimal notches are put on the rotor pole with an arc shape proposed. The variation of vibration frequency due to the cogging torque and radial force of each model is computed by the finite element method (FEM). From the analysis result and experiment, we confirmed the proposed model has remarkably improved the vibration and EMI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2161-2163
• /
• 2002

The PID type controller has been widely used in industrial application doc to its simply control structure, ease of design and inexpensive cost. However control performance of the PID type controller suffers greatly from high uncertainty and nonlinearity of the system, large disturbances and so on. This paper presents a hybrid fuzzy logic proportional plus conventional integral derivative controller (Fuzzy P+ID). In comparison with a conventional PID controller, only one additional parameter has to be adjusted to tune the Fuzzy P+ID controller. In this case, the stability of a system remains unchanged after the PID controller is replaced by the Fuzzy P+ID controller without modifying the original controller parameters. Finally, the proposed hybrid Fuazy P+ID controller is applied to BLDC motor drive. Simulation results demonstrated that the control performance of the proposed controlled is better than that of the conventional controller.

• 전력전자학회논문지
• /
• 제16권2호
• /
• pp.130-136
• /
• 2011

본 논문은 전기 스쿠터용 영구자석 동기 전동기(PMSM)의 토크제어 알고리듬을 제안한다. 전기 스쿠터용 인휠(In-wheel) 모터는 기구적으로 고 분해능의 회전자 위치검출 센서인 레졸버나 엔코더를 장착하기 어려워 저 분해능의 홀 센서를 사용한다. 본 논문은 홀 센서를 갖는 영구자석동기전동기의 벡터제어를 위하여 속도관측기를 사용하여 회전자의 속도 및 고분해능의 위치정보를 관측한다. 초기 기동시에는 일반적인 120도 통전방식의 BLDC 운전모드로 기동하고, 기동 후에는 벡터제어 방식으로 전환하여 단위 전류 당 최대 토크(Maximum Torque Per Ampere, MTPA) 운전과 약자속(Flux weakening) 제어를 수행한다. 제안한 알고리듬은 전기스쿠터의 장착실험을 통하여 검증하였다.