• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.429-433
• /
• 2000

Recently the demand of motor for industrial household machinery is increasing. As Switching devices and control technology are progressing so the use of BLDC Motor is increasing But 3-Phase BLDC Motor generally used has pulsating torque and speed variation in commutation so the range of it's application is limited high speed application Especially to solve these problems it is necessary to increase phase to Motor so study of Poly-Phase BLDC Motor is progressing. In this paper we designed 7-Phase BLDC Motor drive system and MSTC(Minimum Switching Time Controller)

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.928-934
• /
• 1998

This paper describes a fully digitalized driver for BLDC motors which is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to establish a speed control system a repetitive control method is adopted to track a periodic refer-ence change in the BLDC motor system. The experimental results show accurate reference track-ing performance under the given periodic reference in the repetitive controller design.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.332-336
• /
• 1998

Recently, the BLDC(Brushless DC) motor has been increasingly applied to home appliance and the study of BLDC motor drive is extensively processing, so it is necessary to investigate the characteristic of the BLDC motor drive. In this paper, we proposed the modeling of interior permanent - magnet BLDC motor drive. The state model of motor and the model of inverter using pulse width modulation are included. The modeling is verified by the experimental results.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2518-2523
• /
• 2007

In this paper, thermo-flow characteristics of an outer-rotor type of a BLDC motor are numerically analyzed using three-dimensional turbulence modeling. In an advance design of BLDC motor, cooling blades and holes are preferred for the enhanced cooling performances. Rotating the blades and holes generates axial air flow passing through stator slots, which cools down stator by forced convection. For the present study, a new design of the BLDC motor has been developed and major design parameters such as the arrangement of cooling holes, the area of cooling holes, and cooling blades and the cooling blade angle, are analyzed for the enhanced convective heat transfer rate. It is found that the convective heat transfer rate of the new BLDC motor model is increased by about 8.1%, compared to that of the reference model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.45-52
• /
• 2002

This paper presents fault detection scheme of Brushless DC(BLDC) motor drive system by estimating BLDC motor resistance using motor input and output data which is transmitted from data acquisition board to host computer over serial communication channel. Since communication time delay has a serious effect on performance, we use periodic and fixed communication protocol. Hence, the delay time is priory known. Simplified BLDC motor model and recursive least square algorithm is used for estimating motor resistance. By experiment result, we confirm the proposed scheme.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.172-174
• /
• 2011

This paper is presented for robot vacuum cleaners using BLDC motors. Recently, BLDC motors which require smaller size, lower sound noise and higher efficiency have been placed in high value-added products including robot vacuum cleaners, vehicle cars and other industry applications. The DC motors have higher sound noise, higher height of the size and lower efficiency due to electro-magnetic structure using the brushes and the commutators. The proposed BLDC motors are appropriate for the motors adequate in regards to higher efficiency, longer life cycle time, and smaller height of the size when robot vacuum cleaners go to some lower height of the space like under sleeping beds and because it's power source is batteries. The paper shows the performance of the BLDC motors designed by the Finite Element Analysis(FEA) of the electro-magnetic field. This paper shows the mechanical structure and the prototype of the motor with the impeller. The performance characteristics of the BLDC motors with the hall sensor controller are verified by the experimental results.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1138-1142
• /
• 2007

As a brush DC motor, the brushless DC motor is also operated by DC power supply but has no mechanical contacts occurred by a brush or a commutator. Though the performance of BLDC motor is almost similar with that of DC motor, the BLDC motor has the advantage of the high speed responsibility, the high controllability, and the high effectiveness. The control valve using the BLDC motor, which excludes the burnout effect provoked possibly by the vacuum condition during the flight, is employed for the upper stage of a launch vehicle. For the component level analysis, the dynamic response characteristics of BLDC and DC motors to the same design input sources have been studied in using AMEsim.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.66-68
• /
• 2005

DC motor is easy to control and can make torque easily. DC motor uses wide range. But DCmotor have limited by using a brush and structural complexity. But, BLDC doesn't have brush so that is more simple than DC motor, and the rotor of BLDC motor is made by permanent magnet that dose not need to make a fixed flux speed for flux current. BLDC motor is very efficiency, controllable, and reliable. This paper presents an error detection with a BLDC motor current. Generally, BLDC motor current is used to current feedback, so that can make a critical fault in the system. this paper suggests to detect error by inspection of threshold current value both positive and negative.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.4
• /
• pp.71-76
• /
• 2014

This paper presents the implementation for the BLDC motor speed control system using VHDL and FPGA. The BLDC motor is widely used in automation for its good robustness and easy controllability. In order to control the speed of the BLDC motor, the PI controller used for static RPM output of the BLDC motor to variations in load. In addition, by using the DA converter, we were able to monitor the BLDC motor reference speed and the current speed through real time. The motor speed command and the parameters of the PI speed controller were modified easily by the FPGA and the AD converter. Finally, in order to show the feasibility of the control algorithm the speed control characteristics of the motor was monitored using an oscilloscope and the DA converter. Further, the speed control system was designed in this paper has shown the applicability of the drive system of the factory automation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.757-764
• /
• 2018

This paper describes the design and implementation of a 1hp class two-phase type BLDC fan motor used in an air conditioning system. The BLDC motor, which is implemented in this study, is not a commutator motor type with excellent lifetime and durability and is driven by two phase power source. The most important target specification of a motor used in an air conditioning system is that it has a high efficiency at the rated operating point. For this purpose, we designed the stator shape of the BLDC motor, the design of the rotor magnet, and the control circuit for driving. The BLDC motor has a structure where the motor part, the control part, and the power part are integrated. The finite element analysis was used to calculate the characteristics of the BLDC motors, and the conformity of the design results was confirmed by fabricating and testing the prototype model.