• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.608-614
• /
• 2009

본 연구에서는, 비이온성 삼원공중합체 계면활성제인 $EO_{20}PO_{70}EO_{20}$를 주형으로 사용해, 다양한 Si/Ru 몰 비의 루테늄이 치환된 SBA-15들(Ru-SBA-15)을 합성하였다. 촉매 또는 선택적 흡착제 등으로써의 응용가능성을 검토하기 위해 Ru-SBA-15의 질소 또는 산소 흡착/탈착 거동을 조사하였다. Ru-SBA-15의 기공 크기는 Barrett-Joyner-Halenda(BJH) 및 Broekhoff-de Boer/Frenkel-Halsey-Hill isotherm(BdB-FHH) 방법($D_{BdB-FHH}$)을 이용하여 결정하였다. Si/Ru 비율이 50/1인 Ru-SBA 15의 $D_{BJH}$와 $D_{BdB-FHH}$는 각각 3.9, 4.7 nm였다. 투과전자현미경(TEM) 관찰에 의해 Si/Ru의 몰비율이 50인 Ru-SBA 15의 기공 크기는 4.7 nm로 나타났고, 이것은 BdB-FHH 방법을 사용한 $N_2$ 흡착 결과와 일치하였다. 산소 흡착/탈착 등온선으로부터 얻은 Brunauer-Emmett-Teller(BET) 기공 표면적은 질소의 흡착/탈착 등온선으로부터의 기공 표면적보다 높았는데, 각각 $612.7m^2/g$, 그리고 $573.3m^2/g$이었다. X선 회절(XRD) 패턴과 TEM 분석에 의해 본 연구에서 합성한 Ru-SBA-15는 잘 정렬된 육방정계 정렬을 가지는 것을 알 수 있었다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2005년도 추계 학술발표회 발표논문집
• /
• pp.94-96
• /
• 2005

Acetone vapor흡착에서는 활성탄의 BJH 비표면적과 탈착량을 비교했을때 10${\AA}$이하에서는 다층흡착이 일어나며 그 이상의 세공크기에서는 단층 흡착이 일어나는 것으로 판단된다. 동일한 특성을 가진 MEK vapor흡착에서도 활성탄의 BJH 비표면적과 탈착량을 비교했을때 15 ${\AA}$이하에서는 다층흡착이 일어나며 그이상의 세공크기에서는 단층 흡착이 일어나는 것으로 판단된다. 위 실험을 통해 흡착질의 크기와 흡착제의 세공크기 분포에 Knudsen diffusion의 영역을 고려하여 흡착제를 사용하는 것이 좋은 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1715-1720
• /
• 2011

Nanoporous structured tin dioxide ($SnO_2$) is characterized and its application in the photocatalytic destruction of endocrine, Bisphenol A, is examined. Transmission electron microscopy (TEM) reveals irregularly shaped nanopores of size 2.0-4.5 nm. This corresponds to the result of an average nanopore distribution of 4.5 nm, as determined by Barret-Joyner-Halenda (BJH) plot from the isotherm curve. The photoluminescence (PL) curve, corresponding to the recombination between electron and hole, largely decreases in the $TiO_2$/nanoporous $SnO_2$ composite. Finally, a synergy effect between $TiO_2$ and porous $SnO_2$ is exhibited in photocatalysis: the photocatalytic destruction of Bisphenol A is improved by combining the nanoporous structured $SnO_2$ with $TiO_2$, and 75% decomposition of 10.0 ppm of Bisphenol A is achieved after 24 h.

• Carbon letters
• /
• 제11권3호
• /
• pp.169-175
• /
• 2010

The study describes the results of batch experiments on the removal of Reactive Yellow 15 (RY15) and Reactive Black 5 (RB5) from synthetic textile wastewater onto Activated Carbon from Walnut shell (ACW). The experimental data were analyzed by the Langmuir, Freundlish, Temkin and Dubinin-Radushkevich (D-R) models of adsorption. The experiments were carried out as function of initial concentrations, pH, temperature (303-333), adsorbent dose and kinetics. The surface area and pore volumes of adsorbent were measured by BET and BJH methods. The findings confirm the surface area (BET) is 248.99 $m^2/g$. The data fitted well with the Temkin and D-R isotherms for RY15 and RB5, respectively. The most favorable adsorption occurred in acidic pH. Pseudo-second order kinetic model were best in agreement with adsorption of RY15 and RB5 on ACW. The results indicate that walnut shell could be an alternative to more costly adsorbent currently being used for dyes removal.

• KSBB Journal
• /
• 제26권3호
• /
• pp.199-205
• /
• 2011

Using tetrameric ${\beta}$-galactosidase as a model protein, anchoring motives were screened in Bacillus subtilis spore display system. Eleven spore coat proteins were selected considering their expression levels and the location in the spore coat layer. After chromosomal single-copy homologous integration in the amyE site of Bacillus subtilis chromosome, cotE and cotG were chosen as possible spore surface anchoring motives with their higher whole cell ${\beta}$-galactosidase activity. PAGE and Wester blot of extracted fraction of outer layer of purified spore, which express CotE-LacZ or CotG-LacZ fusion verified the existence of exact size of fusion protein and its location in outer coat layer of purified spore. ${\beta}$-galactosidase activity of spore with CotE-LacZ or CotG-LacZ fusion reached its highest value around 16~20 h of culture time in terms of whole cell and purified spore. After intensive spore purification with lysozyme treatment and renografin treatment, spore of BJH135, which expresses CotE-LacZ, retained only 1~2% of its whole cell ${\beta}$-galactosidase activity. Whereas spore of BJH136, which has cotG-lacZ cassette in the chromosome, retained 10~15% of its whole cell ${\beta}$-galactosidase activity, proving minor perturbation of CotG-LacZ, when incorporated in the spore coat layer of Bacillus subtilis compared to CotE-LacZ. Usage of Bacillus subtilis WB700, of which 7 proteases are knocked-out and thereby resulting in 99.7% decrease in protease activity of the host, did not prevent the proteolytic degradation of spore surface expressed CotG-LacZ fusion protein.

• 대한환경공학회지
• /
• 제30권6호
• /
• pp.673-679
• /
• 2008

본 연구에서는 실리카 원으로 tetraethylorthosilcate(TEOS)를 이용하고, template로 cetyltrimethylammonium bromide(CTMABr)을 사용하여 메조포러스 실리카(mesoporous silica)를 수열합성 하였다. 최적의 합성 조건을 알기 위해 template와 실리카의 몰비를 조절하였다. 메조포러스 실리카의 표면 성질과 구조는 XRD, SEM 그리고 BET를 이용하여 살펴보았다. 비표면적($S_{BET}$), 전체 기공부피(V$_T$), 그리고 평균 기공지름(D$_{BJH}$)을 포함하는 N$_2$ 등온 흡착 특성은 BET식을 이용하여 확인하였다. 또한, 메조포러스 실리카의 Pb(II)와 Cd(II)의 흡착 특성은 Zeta potential과 ICP를 이용하여 측정하였다. 그 결과, N$_2$ 등온 흡착으로부터 S$_{BET}$는 100$\sim$1,500 m$^2$/g이었으며, 평균 기공 크기는 2$\sim$4 nm이었다. 메조포러스 실리카의 Pb이온과 Cd이온의 흡착 특성은 용액의 pH변화에 의존하였고, 기존의 흡착제인 실리카겔보다 더 좋은 흡착 거동을 보였다.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.291-298
• /
• 2012

자기 조립 분자 집합체 물질인 CMPO로 표면개질 된 메조 다공성 실리케이트를 가수분해와 축합반응을 이용하여 합성하였다. 손님 물질인 CMPO는 2-(diphenylphosphoryl) acetic acid와 3-(triethoxysilyl) propan-1-amine의 아마이드 결합반응을 이용하여 합성하였으며, MCM-41, SBA-15 그리고 실리카 나노입자와 같은 다양한 메조 다공성 실리케이트는 주인물질로 채택하였다. 메조 다공성 실리케이트의 비표면적은 680 $m^2/g$~1310 $m^2/g$의 넓이로 측정되었으며 BJH 방법을 이용해서 동공의 크기를 확인한 결과 2.3~9.1 nm 범위의 다양한 크기를 가지고 있었다. 메조 다공성 실리카 중에서는 SBA-15(II)가 가장 높은 약 35 wt%의 CMPO 함유량을 나타내었다. 메조 다공성 실리케이트의 표면에 개질된 CMPO 실란 작용기와 란탄족 이온과의 접근성에 관한 연구 결과, CMPO로 개질 된 모든 흡착제의 경우 상대적으로 이온 반경이 큰 La(III)보다는 크기가 작은 Nd(III)와 Eu(III) 이온을 더 선호하였다.

• Carbon letters
• /
• 제2권2호
• /
• pp.105-108
• /
• 2001

In this work, the activated carbons (ACs) with high micropores were synthesized from the polystyrene (PS) with KOH as activating agent. And the influence of activation temperature on porosity of the ACs studied was investigated. The porous structures of ACs were characterized by nitrogen adsorption at 77K using BET and D-R equations, and MP and BJH methods. The weight loss behaviors of the samples impregnated with KOH were also monitored using thermogravimetric analyzer (TGA). As a result, it was found that the samples could be successfully converted into ACs with well-developed micropores. From the results of pore size analysis, it was confirmed that elevated activation temperature does lead to the formation and deepening of microstructures without significant change in mesostructures. A thermogravimetric study showed that KOH could suppress the thermal decomposition of the sample, resulting in the increase of carbon yields.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.231-231
• /
• 2009

In this work, we prepared the Ni-loaded porous SBA-15 (SBA-15) by a depositionprecipitation (D-P) method, in order to enhance the hydrogen storage capacity. The structure and morphology of the Ni/SBA-15 were characterized by X-ray diffraction (XRD) and field emission transmission electron microscopy (FE-TEM). The results showed that, at the Ni loading used at the DP times in the range of 0-120 min, SBA-15 preserved the well-ordered hexagonal porous arrangement. The textural properties of the Ni/SBA-15 were analyzed using N2 adsorption isotherms at 77 K. Specific surface area and mesopore volume of the samples were determined from the Brunauer-Emmett-Teller (BET) equation and Barrett-Joiner-Halenda (BJH) method, respectively. The hydrogen storage capacity of the Ni/SBA-15 was evaluated at 298 K/10 MPa. The hydrogen storage capacity of the Ni/SBA-15 was increased in accordance with Ni content. Consequently, it was found that the presence of Ni on mesoporous SBA-15 created hydrogen-favorable sites which enhanced the hydrogen storage capacity by spillover effect.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.681-687
• /
• 2010

Mesoporous silica was prepared from hydrothermal synthesis using gel mixture of tetraethylorthosilcate (TEOS) as silica source and cetyltrimethylammonium bromide (CTMABr) as a surfactant. In the optimum synthesis cause, molar ratio of template and silica changed. The surface and structure properties of mesoporous silica were determined by XRD, SEM, TEM and BET. Also, surface potential of mesoporous silica was measured using zeta potential. $N_2$ adsorption isotherm characteristics, including the specific surface area ($S_{BET}$), total pore volume $V_T$), and average pore diameter ($D_{BJH}$), were determined by BET. As a result, SBET of $100m^2/g{\sim}1500m^2/g$ was determined from the $N_2$ adsorption isotherm. Also, the average pore diameter was 2 nm∼4 nm. Mesoporous silica's surface potential of minus charge was determined from zeta potential.