• Advances in Computational Design
• /
• v.2 no.2
• /
• pp.89-105
• /
• 2017

The AEC industry is highly interested in effective ICT adoption and deployment, including its utilization within the design process. However, its capabilities have not yet been fully exploited and it is an obvious area for further research. Architects and engineers tend to have some technological support to monitor and evaluate the possible impacts of decisions made throughout the design process. Many aspects are left out of consideration and the entire project is broken up into independent fragments or domains that are combined together at a later, post hoc stage. Impact of separate decisions on each others have to be interpreted on a person-to-person basis between the involved design stakeholders. This paper attempts to evaluate current design practice and associated challenges towards design integration with advanced technologies, such as BIM, by conducting an online survey targeted at designers and engineers, who are most affected by its emerging issues. The outcomes of this study are presented and analysed, concluding that the current design process fails to meet expectations and needs improvements. It goes further to propose the requirements for an integrated system as a means for an effective solution for the identified problem.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.105-112
• /
• 2018

Global environmental problems are growing, and the importance of buildings with high energy consumption has been emphasized. In Korea, the Ministry of Land, Transport and Maritime Affairs has been promoting the mandatory zero energy building since 2020, and guidelines related to the zero energy building have been developed. In addition, based on the "Energy-saving Design Criteria for Buildings" of the "Green Building Promotion Act" in Korea, the standards for energy-saving design are specified and the energy saving plan is written. Besides, the 'Energy-saving construction standards for eco-friendly houses' also specify insulation, machinery, equipment, and sunshade. Also, there is little consideration about the cost such as construction cost and material cost which should be considered important in the construction stage. Therefore, this study aims at analysis of building type and energy performance versus materials for energy saving building design considering energy performance in planning aspect of initial design stage. In this study, because the variables can not be neglected in this study, it is selected as the lecture facility of the 'K' university campus building which can consider the remaining factors except the passive design element as the control variable, Energy performance analysis.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1300-1306
• /
• 2009

If a brief direction and plan for a remodeling project are decided, it may moves to a concrete design step of which to select the most suitable alternative out of applicable compounding devices to reveal dynamic drifting performance. However, the volume of knowledge baseed utility which can refer to systematic evaluation regarding remodeling element technology and the accumulation of realistic cases are not only sufficient, but also short including its system for expression and consistency. Therefore, it may necessary to deliver the main frame which make enables the Owner, designer and builder to get performance technology for applying advanced remodeling element and knowledge based utility. There is a necessity to provide an information with latest made by virtue of modeling in the 3D/4D based on construction-based knowledge etc. which we can use for life cycle of a project, as a prominent way of knowledge based utility. Then, it is sure that remodeling can become more activative by sharing of knowledge based utility formed in electronic 3D/4D which is a systematic and expressed consistently to a performance and applicability in preservation of savings. It is expected for modeling of the 3D/4D in knowledge based utility enables to verify the practicability of each technology on effective application, and the use of technology might be spread widely due its obvious and oriented expressions. Further, this knowledge based utility formed in electronic 3D/4D may applicable for VE process in addition to remodeling design fields.

• Journal of KIBIM
• /
• v.13 no.2
• /
• pp.1-15
• /
• 2023

Since the 1960s, the Korean Peninsula, which consists of 77.4 of the country's land and mountains, has seen a surge in demand for buildings due to population concentration due to urbanization and industrialization. Since then, the development of slopes has been inevitable due to the concentration and expansion of the city's population. When building a building on a slope, it is important to set the height of the surface. In this case, the means of regulating buildings in construction-related laws, such as the building closure ratio, floor area ratio, number of floors and total floor area of buildings, have an overall effect on buildings through the height of the surface. In the Korean Building Act, the setting of the height of the ground affects the calculation of the building height limit standard and the calculation of the underground floor, and it takes a long time to calculate. Therefore, the time required for attempts to change various design plans of buildings increases. The purpose of this study is to speed up the time required to calculate the weighted average of the surface when constructing buildings on slopes. In addition, the existing calculation process allows various design attempts compared to the same time given.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.370-378
• /
• 2020

The Construction Operations Building Information Exchange (COBie) collects and documents a large amount of information from different paths in one place during design and construction projects. This documented information is readily available as a means of continuously transferring data to the facility management systems used by building engineers. In this process, the COBie Worksheet, an open standard form, is used to input the information by simplifying the list required by the user. As a result, COBie was developed to improve dramatically how relevant information is obtained and updated to support operations, maintenance, and asset management at the design and construction stages. On the other hand, to use COBie, a great deal of manual work is required for information linkage and quality inspection with heterogeneous data models. These issues become obstacles to COBie-based facility management system development. This study analyzed the COBie information system and defined the framework for simpler operating maintenance information from BIM (Building Information Modeling). Moreover, the rules for facility management information submission, quality inspection, role definition of framework components, and information linkage were derived. COBie DB schema and support data linkages could be generated effectively based on the proposed framework in prototype development.

• Journal of Computational Design and Engineering
• /
• v.1 no.4
• /
• pp.223-232
• /
• 2014

This paper describes a variant of the extended Gaussian image based registration algorithm for point clouds with surface color information. The method correlates the distributions of surface normals for rotational alignment and grid occupancy for translational alignment with hue filters applied during the construction of surface normal histograms and occupancy grids. In this method, the size of the point cloud is reduced with a hue-based down sampling that is independent of the point sample density or local geometry. Experimental results show that use of the hue filters increases the registration speed and improves the registration accuracy. Coarse rigid transformations determined in this step enable fine alignment with dense, unfiltered point clouds or using Iterative Common Point (ICP) alignment techniques.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1328-1333
• /
• 2009

On the construction area, Information Technology (IT) has been a considerably significant part over the all phases; plan, design, procurement, construction and post-construction. For example, CALS, CITIC, PMIS, FMS, BIM and etc, designed and applied for managing construction industry are already valuable to improve on the Construction Management (CM). To develop these management methods, lots of mixed-systems are studied and progressed so far. In this paper, more useful and efficient system modules are proposed through investigating PMIS cases implemented, especially medical projects, to improve into FMS on the post-construction. Because most PMIS on the construction phase is used not to continue as FMS, considerable cost and time is consumed to rebuild the system, even both systems have common modules. As these wastes are faced to design systems, the important modules on PMIS are derived and analyzed to apply to FMS to save time and cost on CM.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.125-129
• /
• 2023

In this paper, we propose a method to design and implement a smart pipeline information management system that can provide visualization information linked to GIS and roadmap based on the construction of precise pipeline buried information. The smart pipeline information management system consists of a positioning device for high-precision pipeline location measurement and surround view image data recording, a database for data storage and management, and a mobile app for remote monitoring and management. It connects surrounding image data and location data with GIS and roadmap. Convenience and accessibility of management can be improved.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.4
• /
• pp.433-442
• /
• 2016

This paper aims to define the relational logic of in-between code articles as well as within atomic sentences in Korean Building Code, as an intermediate research and development process for the automated building permit system of Korea. The approach depicted in this paper enables the software developers to figure out the logical relations in order to compose KBimCode and its databases. KBimCode is a computer-readable form of Korean Building Code sentences based on a logic rule-based mechanism. Two types of relational logic definition are described in this paper. First type is a logic definition of relation between code sentences. Due to the complexity of Korean Building code structure that consists of decree, regulation or ordinance, an intensive analysis of sentence relations has been performed. Code sentences have a relation based on delegation or reference each other. Another type is a relational logic definition in a code sentence based on translated atomic sentence(TAS) which is an explicit form of atomic sentence(AS). The analysis has been performed because the natural language has intrinsic ambiguity which hinders interpreting embedded meaning of Building Code. Thus, both analyses have been conducted for capturing accurate meaning of building permit-related requirements as a part of the logic rule-based mechanism.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.331-337
• /
• 2009

This paper summarizes some of approaches that could be taken for data exchange in a non-interoperable work environment and reports lessons learned from the Dongdaemun Design Plaza and Park project. Today's widespread application of building information modeling (BIM) to the construction and architectural design industries requires a change in the cooperation between business organizations and their methods of communication. In particular, the interoperability of information between interdisciplinary organizations, which use specific programs for different purposes, has become a critical issue. More than just a technical problem, it is also highly related to an organization's collaboration culture and the particulars of a specific project. This paper describes the interoperability issue that occurred during the construction documentation phase of the irregularly shaped building project, Dongdaemun Design Plaza and Park, designed by Zaha Hadid Architects and Samoo Architects and Engineers, from the perspective of the technological problem and the collaborative organizations' communications. Although the perfect compatibility of information is not possible, this paper deals with a practical approach to the interoperability issue by examining the way the end-users of computer-aided design (CAD) resolved the interoperability problems in practice.