• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.202-216
• /
• 1999

The deep foundation is frequently used for the infrastructures. Since the quality control of the cast-in-place concrete foundations such as CIP piles and slurry walls is not so easy as that of the ready made PC(prestressed concrete) piles, it is necessary to get the information on the integrity of the concrete of the foundation. The depth estimation of foundations whose depths are unknown is also very important in repair and reinforcement works or in safety inspection and assessment to the big structures. The cross-hole sonic logging(CSL) system and the single channel reflection seismic measurement system were developed to test the integrity of pile. The former is well applied to CIP structures, while the later to all kinds of piles with less accurate result compared to that of CSL. To estimate the depth of the deep foundations, parallel seismics, borehole RADAR, and borehole magnetics can be used.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.77-83
• /
• 2009

In this experiment, we used different addition ratio of the pigment and straw, to improve the decorative effect of the finishing touch while finding the kinds of clay colors taking on many sophisticated images, through the comparison between the various colors and textures of the surface. (1) To test the plaster material, added were the pigment of Red, Yellow, Black, and Green by the percentages of 0.5, 1, 1.5, 2, and 2.5, respectively, followed by the analysis of the color changes of the plaster material using the Photoshop (RGB). The results showed the bigger the addition ratio of the red color is, the higher the numeral values of RGB after it dried. However the brightness after drying didn't showed a big difference depending on the addition ratio. With the addition of the yellow pigment, the color difference between after and before drying was bigger in the order of Blue, Green and Red; the brightness increasingly rose while the saturation changed little. (2) When we scratched the plaster surface with U and V shape carving knives, the U knife didn't make a clean shape digging around the clay plaster material but with smooth textures, while the V knife made a clean cut, which represents its readily use in terms of the decorative function of the clay plaster. (3) In an experiment the surface texture was tested with different lengths and additions ratio of the straw, addition of 2cm straw by 1, 2, and 3% presented the most appropriate surface of the plaster.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.535-545
• /
• 2014

As the software industry has developed, the attacks making use of software vulnerability has become a big issue in society. In particular, because the attacks using the vulnerability of web browsers bypass Windows protection mechanism, web browsers can readily be attacked. To protect web browsers against security threat, research on fuzzing has constantly been conducted. However, most existing web browser fuzzing tools use a simple fuzzing technique which randomly mutates DOM tree. Therefore, this paper analyzed existing web browser fuzzing tools and the patterns of their already-known vulnerability to propose an event and command based fuzzing tool which can detect the latest web browser vulnerability more effectively. Three kinds of existing fuzzing tools were compared with the proposed tool. As a result, it was found that the event and command based fuzzing tool proposed was more effective.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.881-883
• /
• 2005

In case is below length 100nm of gate, various kinds problem can be happened with by threshold voltage change of device, occurrence of leakage current by tunneling because thickness of oxide by 1.5nm low scaling is done and doping concentration is increased. SiO$_2$ dielectric substance can not be used for gate insulator because is expected that tunneling current become 1A/cm$^2$ in 1.5nm thickness low. In this paper, devised double gate MOSFET(DGMOSFET) to decrease effect of leakage current by this tunneling. Therefore, could decrease effect of these leakage current in thickness 1nm low of SiO$_2$ dielectric substance. But, very big gate insulator of permittivity should be developed for develop device of nano scale.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1449-1457
• /
• 2007

A panorama image is constructed by merging several overlapped images to a big one. There are two kinds of methods, feature based and direct method, in the construction. Feature based one has a merit of processing speed faster than direct one. But, it is difficult to be implemented under slower processing environments such as mobile device. This paper proposed high speed construction method of a panorama image. The algorithm extremely improved matching speed by reducing the number of matching parameters using scene shot guider, and additionally adapted local matching technique to reduce matching error caused by the fewer matching parameters. In the experiments, it was shown that the proposed method required about 0.078 second in processing time, about 17 times shorter than the feature based one, for 24-bit color images of $320{\times}240$ size.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.4
• /
• pp.27-33
• /
• 2006

Frictional properties between geostrip and sand paper interface were estimated considering soil particle size also the friction coefficients and angles were determined with normal stress. Three kinds of geostrips of design strength 50, 70, 100 KN/m were used and 5 sandpapers of P100, P220, P320, P400, P600 were used also. Shear strength between geostrip and sand paper interface with design strength showed big difference and this is due to the uniform surface pattern of each geostrip when contact to sandpaper without regard to design strength. Shear strength of geostrip was increased with design strength and geostrips/P100 sandpaper interface showed the biggest value. Finally, all of geostrips showed the decrease phenomena of post-peak strength and this is due to the abrasion of geostrip surface by shear test.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.9-20
• /
• 2004

On the basis of design theory of soil inversion, two types of moldboard plow with secondary soil mover was designed and constructed to invert furrow slice at same position with furrow bottom. A series of soil bin experiment was carried to investigate the performance of prototypes. First prototype of new concept plow showed two kinds of problems during the preliminary experiment. For the plowing depth of 6cut the prototype did not invert the furrow slice, instead it just cut furrow bottom and the furrow slice returned to the original position. For the plowing depth of 8cm, there was soil clogging problem at the rear part of plow. From the above results it was concluded that the first prototype can not be used for the inversion of furrow slice at same position with furrow bottom. Second prototype could invert furrow slice at the same position with furrow bottom, but the performance was affected by soil moisture content soil hardness and plowing speed very much. For the higher soil moisture content, for the higher soil hardness and higher plowing speed, the prototype showed higher soil inversion performance. For the second prototype the inversion ratio was almost 100%, inversion angle was in the range of 90 to 100 degree and side displacement was less than 4 cm. But the furrow slice was not continuous, it was cut in the length of 30 to 40 cm. The reason why the furrow slice was cut in that length is blamed for the design of moldboard surface. The specific draft of prototype was in the range of 37.24 kN/㎡ to 42.14 kN/㎡ this value is a little higher than that of the conventional plow, or from 30.38 kN/㎡ to 33.32 kN/㎡. But the difference was not so big. The inversion performance of the second prototype for the field experiment was much better than that of soil bin experiment due to the better soil and operational conditions. Sticky and compacted soil conditions, and higher plowing speed was suitable for the plowing operation of the second prototype

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1772-1781
• /
• 2017

In this study, the design methodology for alleviating the overfitting problem of Polynomial Neural Networks(PNN) is realized with the aid of two kinds techniques such as L2 regularization and Sum of Squared Coefficients (SSC). The PNN is widely used as a kind of mathematical modeling methods such as the identification of linear system by input/output data and the regression analysis modeling method for prediction problem. PNN is an algorithm that obtains preferred network structure by generating consecutive layers as well as nodes by using a multivariate polynomial subexpression. It has much fewer nodes and more flexible adaptability than existing neural network algorithms. However, such algorithms lead to overfitting problems due to noise sensitivity as well as excessive trainning while generation of successive network layers. To alleviate such overfitting problem and also effectively design its ensuing deep network structure, two techniques are introduced. That is we use the two techniques of both SSC(Sum of Squared Coefficients) and $L_2$ regularization for consecutive generation of each layer's nodes as well as each layer in order to construct the deep PNN structure. The technique of $L_2$ regularization is used for the minimum coefficient estimation by adding penalty term to cost function. $L_2$ regularization is a kind of representative methods of reducing the influence of noise by flattening the solution space and also lessening coefficient size. The technique for the SSC is implemented for the minimization of Sum of Squared Coefficients of polynomial instead of using the square of errors. In the sequel, the overfitting problem of the deep PNN structure is stabilized by the proposed method. This study leads to the possibility of deep network structure design as well as big data processing and also the superiority of the network performance through experiments is shown.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.473-478
• /
• 2012

The nutritional properties of the Kochujang were investigated with Fermented Extract of Hizikia fusiforme. No big differences in proximate compositions(moisture, Crude protein, Crude fat, and Crude ash, Carbohyrate) were observed between Two kinds of kochujangs tested in this study, general kochujang purchased from a market(GK), kochujang added with Fermented Extract of Hizikia fusiforme(FGK). However, FGK showed higher level of Total free amino acid(15,929.5 ng/mg), amino nitrogen(1715.88 mg%) and mineral contens than GK. the analysis of volatile compounds using GC/MS revealde than the fermentation dramatically removed off-flavors such as Acetaldehyde, Silane rimethyl(2-methylphenyl)-, 1H-Indole 2-phenyl-1-(trimethylsilyl) in Fermented Extract of Hizikia fusiforme(FGK).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.861-868
• /
• 2019

Various server-based services such as big data, IoT and artificial intelligence have been made online. As a result, the demand for IDC to support stable server operation is increasing. IDC is a server-based facility with a stable line and power supply facility that manages 20 to 30 servers in an efficiently separated rack-level subnetwork. Here, we need a way to efficiently manage servers security, firewall, and traffic on a rack-by-rack basis. Including traffic shaping capabilities that control routers, firewalls, IPS, and line speeds, as well as VPN technology, a recent interest. If three or five kinds of commercial equipment are adopted to support this, it may be a great burden to the management cost as well as the introduction cost. Therefore, in this paper, we propose a method to implement the five functions in one rack-unit small integrated security router. In particular, IDC intends to integrate traffic shaping and IPS, which are essential technologies, and to propose the utility accordingly.