• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1765-1775
• /
• 2000

The removal of radioactive organic iodide generated from high temperature process in nuclear facility was generally performed by silver ion-exchanged synthetic zeolite (AgX). The purpose of this study is to obtain fundamental data for the substitution of natural zeolite(NZ) in stead of synthetic zeolite as supporter for the removal of methyl iodide in high temperature conditions. Therefore, NZ was modified with NaCl, $NaNO_3$ solution, and the analysis of the physical or surface characteristics through XRD, SEM-EDAX, and BET analysis was performed. In order to obtain the optimal surface-modification condition of NZ, adsorption capacities at $150^{\circ}C$ on surface-modified silver ion-exchanged NZ prepared with the variation of solution concentration were evaluated. The optimal condition of surface modification is that concentration of $NaNO_3$ and $AgNO_3$ are 1N and 1.2N, respectively(namely Ag-SMNZ). The adsorption isotherm of methyl iodide on Ag-SMNZ in a range of $100^{\circ}C$ to $300^{\circ}C$ was obtained, which is similar to that of 13X, and the maximum adsorption amount of Ag-SMNZ reached approximately 50% that of AgX. It would be evaluated that the adsorption capacity at $150{\sim}200^{\circ}C$ is relatively higher than other temperature, and the chemisorption between silver and iodide is attributed to a strong binding even after desorption test.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.464-469
• /
• 2003

In this work, the fragrant oil release behavior of poly($\varepsilon$-caprolactone) (PCL) microcapsules containing SiO$_2$ was investigated. The SiO$_2$ was chemically treated in 10, 20, and 30 wt% hydrochloric acid and sodium hydroxide. The acid and base values were determined by Boehm's titration technique and $N_2$/77 K adsorption isotherm characteristics, the specific surface area and total pore volume were studied by BET. The PCL microcapsules containing SiO$_2$ and fragrant oil were prepared by oil-in-water (o/w) emulsion solvent evaporation method. The shape and surface of PCL microcapsules were observed using image analyzer and scanning electron microscope (SEM). The fragrant oil release behavior of PCL microcapsules was characterized using UV/vis. spectra. The average diameters of PCL microcapsules were decreased from 35 to 21 $\mu$m with increasing stirring rate. It was found that in the case of acidic treatment the fragrant oil adsorption capacity and release rate were increased due to the increase of specific surface area and acid value. In the case of basic treatment, the fragrant oil adsorption capacity and release rate were decreased due to the decrease of sp ecific surface area and the increase of acid-base interactions between SiO$_2$-NaOH and fragrant oil with increasing base value of SiO$_2$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.524-526
• /
• 2009

바이오디젤은 식물성 기름이나 동물성 지방과 같은 재생 가능한 원료로부터 전이에스테르화 반응을 통해 생산되는 대체 연료이다. 본 연구에서는 NaX 제올라이트 촉매에 염기성 물질인 KOH를 담지한 후 소성온도에 따라 제조된 촉매를 사용하여 바이오디젤 제조 특성을 조사하였다. 제조된 촉매의 결정구조와 성분을 분석하기위해 XRD, SEM 을 이용하였으며, 표면적을 측정하기 위해 BET 를 사용하였다. 실험결과 소성온도가 $500^{\circ}C$일 때 30wt% KOH/NaX 제올라이트 촉매내 K 함량이 가장 높았고, 이때 70%이상의 높은 바이오디젤 수율을 얻을 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.390-393
• /
• 2008

본 합성법으로 제조된 메조포러스 실리카는 X-선 회절패턴, TEM, FT-IR, BET 측정 결과 MCM-41의 특성과 동일하게 나타났다. 연구 결과 PH조절에 따른 MCM의 특성을 표면적, 기공분포, XRD회절분석, SEM, TEM의 결과를 이용하여 파악하였으며, 쌀겨로부터 규소원을 MCM-41의 합성이 가능함을 알 수 있었다. PH조절에 황산과 아세트산 두 가지의 산을 사용하였다. 그 결과 황산보다는 아세트산을 사용하였을 때 수율과 주기공 크기가 증가하는것을 알수있었다. 아세트산을 이용한 경우 팽윤 효과를 나타내어 주기공 크기가 커진 것이다.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.114-119
• /
• 1998

등방성 피치계 탄소섬유를 Co$_{2}$gas중에서 등온산화시켜 활성탄소섬유를 제조하였다. 산화된 섬유의 비표면적은 BET장치를 이용하여 측정하였다. Burn-off가 증가하여도 반응속도는 크게 감소하지 않았으며, 80$0^{\circ}C$와 90$0^{\circ}C$에서 산화된 섬유의 비표면적은 40%-60%의 burn-off에서 급격히 증가하다가 60%이상에서 감소하였다. 110$0^{\circ}C$에서 산화된 시편은 40%이상 burn-off되어도 비표면적은 크게 증가하지 않고 60%를 지나서도 계속해서 표면적이 증가하는 현상을 나타내었다. 100$0^{\circ}C$에서 60.4%의 burn-off가 일어난 산화섬유의 비표면적은 3,614$m^2$/g로 가장 큰 값이 얻어졌다. 등방성 탄소섬유는 미세한 흑연결정립들이 무질서한 배향을 하고 있으며, 미세기공벽으로 작용할 수 있는 결정립층이 많기 때문에 활성탄소섬유 제조를 위한 원료로 적합하다고 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.148-149
• /
• 2015

본 연구에서는 전기 도금법을 이용하여 수 마이크로미터(${\mu}m$)에서 수십 마이크로미터 크기의 수지상(dendrite) 구리분말을 제조하였다. 구리 도금욕의 종류($Cu_2P_2O_7$, $CuSO_4$, $CuCl_2$), 인가 전위(E, Volt) 및 기판에 따른 수지상(Dendrite)의 형상적인 특성이 비교되었으며, 형상에 따른 겉보기밀도와 비표면적 측정(BET)이 진행되었다. 수지상의 2차 가지길이와 주축길이의 비(ratio)를 형상의 차이로 분류한 결과 염화구리 도금욕에서 0.14 로서 가장 큰 값을 가지며 겉보기 밀도는 $1.04g/cm^3$로 가장 낮은 값을 보였다.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.416-422
• /
• 2016

We have investigated the effects of applied potential, deposition time and electrolyte types on shapes and physical properties of Cu dendrites by potentiostatic electrodeposition. Finer shape of dendrites was observed at less cathodic potential by 100mV than at the limiting current, due to 'effective overpotential'. The shape of copper dendrite is related to the deposition time, too. The dendrite depositing for 10 min showed the finest shape. The finer dendrite has the less apparent density and the larger specific surface area. Dendrite from chloride solution has the lowest density and the largest surface area among three plating solutions, sulfate, chloride and pyrophosphate.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.608-614
• /
• 2009

In this work, ruthenium substituted SBA-15's(Ru-SBA15's) of various Si/Ru ratios were prepared using a non-ionic triblock copolymer surfactant, $EO_{20}PO_{70}EO_{20}$, as template. We investigated the nitrogen or oxygen adsorption/desorption behaviors of the Ru-SBA-15's for their future applications as catalysts or selective adsorbents, etc. The pore size of the Ru-SBA-15's was determined by both the Barrett-Joyner-Halenda(BJH)($D_{BJH}$) and the Broekhoff-de Boer analysis with a Frenkel-Halsey-Hill isotherm(BdB-FFF) method($D_{BdB-FHH}$). The $D_{BJH}$ and $D_{BdB-FHH}$ of the Ru-SBA-15 having 50/1 ratio of Si/Ru were 3.9 nm and 4.7 nm, respectively. The transmission electron microscope(TEM) image of the Ru-SBA 15 of the Si/Ru mole ratio of 50 showed that the pore size is 4.7 nm, which is consistent with the $N_2$ adsorption results with the BdB-FHH method. The surface area of pores form oxygen adsorption/desorption isotherm was higher than that from the nitrogen adsorption/desorption isotherm by the Brunauer-Emmett-Teller(BET) method, which were respectively $612.7m^2/g$, and $573.3m^2/g$. X-ray diffraction(XRD) patterns and TEM analyses showed that the mesoporous materials possess well-ordered hexagonal arrays.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1052-1060
• /
• 1999

Tire and raw material of tire, i.e., SBR were degraded using pyrolysis process. The yield of pyrolytic oil was increased and that of gas was decreased with increase of operating temperature in pyrolysis. And the yield of pyrolytic oil was increased and that of gas and char was decreased with increase of heating rate. The maximum oil yields of SBR and tire were 86% and 55% each at $700^{\circ}C$ with a heating rate of $20^{\circ}C/min$. The number average molecular weight ranges of SBR and tire were 740~2486, 740~1719, and the calorific value of SBR and tire was 39~40 kJ/g. The oil components were consisted of mostly 50 aromatic compounds. The particle size was decreased and the surface area was increased with increase of operating temperature, and the BET surface area was $47{\sim}63m^2/g$. The optimum condition of pyrolysis was the temperature of $700^{\circ}C$ with heating rate of $20^{\circ}C$, and the reactor was continuously purged with inert gas to sweep the evolved gases from the reaction zone.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.296-303
• /
• 2021

The objective of this study is to investigate the applicability of a Cu-supported honeycomb catalyst as a catalyst for decomposition of a low toxic liquid propellant based on ammonium dinitramide (ADN). A mixture of copper, lanthanum, and alumina was supported on the honeycomb support by wash coating to prepare a Cu-La-Al/honeycomb catalyst. We elucidated that the effect of metal loading on the physicochemical properties of Cu-La-Al/honeycomb catalyst and catalytic performance in decomposition of the ADN-based liquid propellant. As the number of wash coatings increased, the amount of active metal Cu was increased to 4.1 wt%. The BET surface area of the Cu-La-Al/honeycomb catalyst was in the range of 3.1~4.1 ㎡/g. The micropores were hardly present in Cu-La-Al/honeycomb catalysts, however, the mesopores and macropores were well developed. The Cu (2.7 wt%)-La-Al/honeycomb catalyst exhibited the highest activity in the decomposition of the ADN-based liquid propellant, which is attributed to the largest surface area, the largest pore volume, and the well-developed mesopores and macropores.