• Korean Journal of Crystallography
• /
• v.6 no.1
• /
• pp.27-35
• /
• 1995

The crystal structure of 1-tert-butoxycarbonyl-4-[N-(tert-butoxycarbonyl)-N-(ethoxycarbonylmethyl)amino]-3-phenylsulfonylpyrrolidind [C24H36O8N2S] has been from single crystal x-ray diffraction study ; C24H36O8N2S triclinic, p1, a=11.363(8)Å, b=11.589(6)Å, c=11.013(10)Å,α=95.32(6)°,β=98.64(7)°,γ=79.57(5)°,V=1406.8(18)Å3, t=293K, Z=2, CuKα(λ=1.5418Å). The molecular structure was solved by diredt method and refined by full-matrix least squares to a final R=9.78% for 3621 unique observed [F≥4σ(F)] reflections and 703 paramenters.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.261-271
• /
• 2006

The present study is aimed at evaluating the economic effectiveness of Abalone, haliotis discus hanai Releasing Project(ARP) conducted in the fishing ground owned by a fishing village in Ulsan, Korea. The results were summarized as follows: First, an average ratio of released abalones in the total landing after releasing is shown to be 85.0%. Second, the recapture rate of released abalones is 46.8%, exceeding the recapture rate of BEP(Break-Even-Point), 22.9%. Third, it is evaluated that total economic effectiveness of the ARP is 6.7-6.8 times, net effectiveness is 2.2-2.3 times, and the NPV(Net Present Value) discounted by a 8% interest rate is 474, 635 thousand wons, indicating the project is profitable. Considerable parts of the positive results on the ARP are based on some beneficial conditions, including the selection of favorable releasing sites, best self-regulation system of a fishing village for preservation of seaweed facilities and continued activities for protecting small abalones and their rearing. These results imply that the success of the ARP would be primarily dependent upon the selection of releasing site and effective management system after releasing.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.9
• /
• pp.937-942
• /
• 2008

This paper presents a case history on failures of impeller and shaft due to pressure pulsation at single stage feed water pumps in 700 MW nuclear power plant during commissioning operation. The pumps had been service and had run for approximately $40{\sim}50$ hours. For the most part, the failures of impeller occurred with the presence of a number of fatigue cracks. All cracks were associated with the deleterious surface layer of impeller by visual and metallurgical examination. On-site testing and analytical approach was performed on the systems to diagnose the problem and develop a solution to reduce the effect of exciting sources. A major concern at high-energy centrifugal pump is the pressure pulsation created from trailing edge of the Impeller blade, flow separation and recirculation at centrifugal pumps of partial load. Pressure pulsation due to the interaction generating between impeller and casing coincided with natural frequencies of the impeller and shaft system during 1ow load operation. It was identified that dynamic stress exceeding the fatigue strength of the material at the thin shroud section due to the hydraulic instability at running condition below BEP.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4787-4790
• /
• 2015

Objective: To review ovarian cancer cases in children and adolescents in Siriraj Hospital and assess the prognosis, recurrence of disease, and reproductive outcomes after treatment. Materials and Methods: A retrospective descriptive study was conducted in ovarian cancer patients 21 years and younger who had been treated at Siriraj Hospital between January 1990 and December 2009. Medical records were reviewed and relevant data were recorded. Results: A total of 48 cases met the criteria; their mean age was 16.4 years. Abdominal distension was the major symptom. 91.6% were germ cell tumors and the remaining cases were sex cord-stromal and epithelial tumors. More than half (25/48 cases) presented with stage I disease. The most common used chemotherapy regimen for germ cell tumors was BEP (bloemycin, etoposide, cisplatin). Most of patients had favorable outcomes; 46/48 cases had complete remission and retained their good health at the time of the review. We had only one recurrent case and one dead case. Ten of contacted patients had married and 3 of them had successful full-term pregnancies. Conclusions: Ovarian malignancy in children and adolescents is a rare disease. The authors reported 48 cases in 20 year-period of work. Most of them have favorable outcomes. Return of ovarian function and fertility are the topics of interest.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.287-295
• /
• 2017

The most detrimental pressure pulsations in high-head pump-turbines is caused by the rotor-stator interaction (RSI) between the guide vanes and runner blades. When the pump-turbine operates in the S-shaped region of the characteristic curves, the deteriorative flow structures may significantly strengthen RSI, causing larger pressure pulsations and stronger vibration with an increased risk of mechanical failure. CFD simulations were carried out to analyze the impacts of flow evolution on the pressure pulsations in the S-shaped region of a model pump-turbine. The results show that the reverse flow vortex structures (RFVS) at the runner inlet have regular development and transition patterns when discharge reduces from the best efficiency point (BEP). The RFVS first occur at the hub side, and then shift to the mid-span near the no-load point, which cause the strongest pressure pulsations. The locally distributed RFVS at hub side enhance the local RSI and makes the pressure fluctuations at the corresponding sections stronger than those at the rest sections along the spanwise direction. Under the condition of RFVS at the mid-span, the smaller flow rate make the smaller difference of pressure pulsation amplitudes in the spanwise direction. Moreover, the rotating stall, rotating at 35.7%-62.5% of the runner rotational frequency, make the low frequency components of pressure pulsations distribute unevenly along the circumference in the vaneless space. However, it have little influence on the distributions of high components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.240-247
• /
• 2011

In this paper, we made cost & benefit analyses of both WLAN-based and WiBro-based wireless networks for U-City(Ubiquitous City). We obtained basic data for cost analysis such as the number of network equipments through cell design and cell-coverage analysis. Also we made benefit analysis considering technical features of WLAN and WiBro networks. By cost & benefit analysis, we have reached conclusions that WiBro-based wireless network has earlier BEP(Break-Even Point) and larger NPV(Net Present Value) than WLAN-based network, and that WiBro is more efficient wireless network for U-City.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.158-158
• /
• 2010

본 연구에서는 분자선 박막성장 장비를 (MBE) 이용하여 droplet epitaxy 방법으로 성장시킨 GaAs/AlGaAs 양자점구조의 표면전기장변화에 관하여 photoreflectance spectroscopy (PR)를 이용하였다. 본 실험에 사용된 GaAs/AlGaAs 양자점 구조는 undoped-GaAs (001) 기판을 위에 성장온도 $580^{\circ}C$에서 GaAs buffer layer를 100 nm 성장 후 장벽층으로 AlGaAs을 100 nm 성장하였다. AlGaAs 장벽층을 성장한 후 기판온도를 $300^{\circ}C$로 설정하여 Ga을 3.75 원자층를 (ML) 조사하여 Ga drop을 형성하였다. Ga drop을 GaAs 나노구조로 결정화시키기 위하여 $As_4$를 beam equivalent pressure (BEP) 기준으로 $1{\times}10^{-4}$ Torr로 기판온도 $150^{\circ}C$에서 조사하였다. 결정화 직후 RHEED로 육각구조의 회절 페턴을 관측하여 결정화를 확인하였다. GaAs 나노 구조를 성장한 후 AlGaAs 장벽층을 성장하기위해 10 nm AlGaAs layer는 MEE 방법을 이용하여 $150^{\circ}C$에서 저온 성장 하였으며, 저온성장 후 기판온도를 $580^{\circ}C$로 설정하여 80 nm의 AlGaAs 층을 성장하고 최종적으로 GaAs 10 nm를 capping layer로 성장하였다. 저온성장 과정에서의 결정성의 저하를 보상하기위하여 MBE 챔버내에서 $650^{\circ}C$에서 열처리를 수행하였다. GaAs/AlGaAs 양자점의 광학적 특성은 photoluminescence를 이용하여 평가 하였으며 780 nm 근처에서 발광을 보여 주었다. 특히 PR 실험으로부터 시료의 전기장에 의한 Franz-Keldysh oscillation (FKO)의 변화를 관측하여 GaAs/AlGaAs 양자점의 존재에 의한 시료의 표면에 형성되는 표면전기장을 측정하였다. 또한 시료에 형성된 전기장의 세기를 계산하기위해 PR 신호로부터 fast Fourier transformation (FFT)을 이용하였다. 특히 온도의 존성실험을 통하여 표면전기장의 변화를 관측 하였으며 양자구속효과와 관련성에 대하여 고찰 하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.39-49
• /
• 2021

The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force's de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.445-449
• /
• 1999

We studied the properties of the InAs epitaxial layers grown of (100)-oriented GaAs ($2^{\circ}$tilted toward[011]) by molecular beam epitaxy. From DCX (double-crystal x0ray), the better crystal quality was shown in InAs epitaxial layers on about 2500$\AA$ GaAs epitaxial layers on GaAs, we obtained the high mobility of InAs epitaxy in As/In BEP ratio (1.2~2.0) from Hall effect measurement. The electron mobility increased as electron concentration increases, until Si cell temperature $960^{\circ}C$$(N_D=2.21\times10^{-17}\textrm{cm}^{-3})$. The mobility decreases as the Si cell temperature increases, at the temperature over $960^{\circ}C$. We obtained the high mobility (1.10$\times$104cm2/V.s) at Si electron concentration of $N_D=2.21\times10^{-17}\textrm{cm}^{-3}$.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.481-496
• /
• 2023

Purpose: The main theme of this study is to derive a profit curve by a cubic cost function for nonlinear CVP analysis. According to the analytical approach to derive a nonlinear profit function in this study, it is possible with only the existing cost structure to calculate the profit maximization and downtime point sales unlike the classical CVP analysis. Furthermore, the profit curve by the mathematical model of this study could serve as a tool to quantify the qualitative evaluation of each stage of the industry life cycle. Methods: This study followed the mathematical approach from the cubic cost function model of microeconomics, and using real data of the Bank of Korea Results: The nonlinear profit function suggested by this study is as follows; ${\pi}(x)=-a\left(x-\frac{f}{1-v}\right)^3+(1-v)x-k$ where $a=\frac{1}{3}v\left(\frac{(1-v)}{f}\right)^2,k=f-a\left(1-\frac{f}{1-v \right)^3$ Conclusion: The process and results of this study would be able to contribute not only in practice of nonlinear CVP analysis required in the management accounting or financial management, but also in cost theory of microeconomics. Also, since the life cycle of all industries in Korea was verified to the growth or mature stage, decision makers should pay careful attention to determining life cycle stages and consider the profit curve by the average variable cost ratio over multi periods.