• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.4
• /
• pp.49-56
• /
• 1986

This study was carried out to investigate mechanical characteristics of the uniformly loaded skew-plate at 4 kinds of boundary condition : i) all edges are clamped (BC-1) , ii) all edges are simply supported (BC- 2), iii) two opposite edges are clamped and the other two edges are free (BC-3), and iv )two opposite edges are simply supported and the other two edges are free (BC-4). Various skew angles, 0$^{\circ}$, 10$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, 40: 45: and 60, of the plate were tested for the above boundary conditions. Resutts obtained from the study are summarized as follows ; 1.The lateral displacement at the center of a skew- plate was decreased as the skewangle increased at all of the boundary conditions. The decrements of the conditions of BC-3 and BC-4 were considerable. And, difference of the displacement between the boundary conditions was decreased as the skew-angle was increased. 2. X-moments (to the Y-axis) at the center of a skew- plate and the minimum principal moments were shown as a similar pattern of change with respect to the skew-angle variation between BC-i and BC-2 and between BC-3 and BC-4, and the pattern of change at the conditions of BC-3 and BC-4 were shown higher rates than those for the conditions of BC-i and BC-2 3.Y-moments (to the X- axis) at the center of a skew-plate and the maximum principal moment were decreased as the skew-angle increased in a similar pattern at all of the boundary conditions. 4.X-moments at the obtuse angle side of a skew-plate were shown as a parabolic pattern of change (frist increased after then decreased) as the skew-angle increased, and a skew-angle resulting the maximum absolute moment was depended on the boundary conditions. 5.Y-moments at the obtuse angle side of a skew-plate were affected by the skewangle much more at the boundary condtions of BC-2 and BC-4 than at the conditions of BC-i and BC-3. 6.Maximum principal moments at the obtuse angle side of a skew-plate at the skew angle of 40$^{\circ}$- 45$^{\circ}$ were resulted almost the same value at all of the boundary conditions .

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.79-84
• /
• 2015

A BC-B type bulk carrier is rarely built, so the structural characteristics is not reported and familiar so far. The biggest difference between BC-B and BC-A type vessel is applying alternate cargo loading, which density is over $1.0ton/m^3$. In this paper, 150K DWT class BC-B type bulk carrier is calculated and compared with BC-A type vessel, which has same condition such as main dimension and deadweight, about prescriptive rule and FEA based on CSR. And aspect ratio of target vessel is smaller than typical capsize bulk carrier, so 150K and 180K bulk carrier, which applied BC-A type, are also compared to find feature of wide beam vessel.

• The Korean Journal of Financial Management
• /
• v.4 no.1
• /
• pp.45-58
• /
• 1988

This paper is to examine the relevance of banarptcy Costs (BC) to Capital Structure with three related purposes: whether or not BC are trival,, a proxy methodology for estimating BC, the present value of expected BC vs tax benefits' trade off. For these purposes, the samples includes 19 industrial firms which went bankrupt over period 1970-78 and secondly seven large Companies which went bankrnpt recently in the U.S. The results are quite strong that BC are not trival. In many cases they exceed 20% of the value of the firm measured just prior to bankruptcy. Direct BC are explicit and administrative costs paid by debtor in reorganization/liqaidation process. Indirect BC are essentially defined as unexpected losses and estimated in two way: a regression method and security analyst's forcasts. The present value of expected BC for many of the bankrupt firm is found to exceed the present value of tax benefits from leverage. This implies that firms were overleveraged and that a potentially important ingredient in the discussion of optimum capital structure is indeed the BC factor. Therefore, BC are relevant to the cost of capital structure decision and should he considered seriously.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.341-345
• /
• 2007

Broadband Convergence Network (BcN) can provide a range of quality guaranteed broadband multimedia services through packet-based converged transport network. For providing new emerging application services in due season over BcN, it is important for network designers or planners to develop a new design methodology for BcN, which differs from legacy design processes applied to a single service network. This paper thus introduces a new design concept and detailed design processes for KT-BcN. We also present a design example of BcN control network using a design system that we have developed.

• Journal of Audiology & Otology
• /
• v.24 no.2
• /
• pp.85-90
• /
• 2020

Background and Objectives: The present study aimed to compare thresholds of direct bone-conduction (BC direct) with those of behaviorally measured BC pure-tone audiometry (PTA) and objectively measured BC auditory brainstem response (ABR) to confirm the clinical feasibility of their relationships. Subjects and Methods: Young adults with normal hearing participated in the study to determine the thresholds from three measurements at four testing frequencies. In the BC direct, the vibrator of a bone-anchored hearing aid softband was placed on the right mastoid of each subject. In both PTA and ABR, a B71 bone oscillator was placed on the subject's right mastoid. While the subject's thresholds of BC direct and BC PTA were determined with a clinically routine 5-dB step procedure, BC ABR was conducted to determine the individual's hearing sensitivity by a peak V of the waveform using tone-burst and click stimuli. Results: The BC direct showed a different pattern between low and high frequencies. Precisely, its thresholds were 13.25 and 12.25 dB HL at 0.5 and 1 kHz, respectively, but 19 and 19.75 dB HL at 2 and 4 kHz, respectively. A significant positive correlation existed between BC direct and PTA at 1 kHz, which was also correlated with ABR. Conclusions: Based on the current data, the thresholds of BC direct were similar to BC PTA at low frequencies and BC ABR at high frequencies. The thresholds of BC direct might be predictable at approximately 5 dB higher (or lower) than that in PTA, although a large data set is required for standardization.

• Korean Journal of Audiology
• /
• v.24 no.2
• /
• pp.85-90
• /
• 2020

Background and Objectives: The present study aimed to compare thresholds of direct bone-conduction (BC direct) with those of behaviorally measured BC pure-tone audiometry (PTA) and objectively measured BC auditory brainstem response (ABR) to confirm the clinical feasibility of their relationships. Subjects and Methods: Young adults with normal hearing participated in the study to determine the thresholds from three measurements at four testing frequencies. In the BC direct, the vibrator of a bone-anchored hearing aid softband was placed on the right mastoid of each subject. In both PTA and ABR, a B71 bone oscillator was placed on the subject's right mastoid. While the subject's thresholds of BC direct and BC PTA were determined with a clinically routine 5-dB step procedure, BC ABR was conducted to determine the individual's hearing sensitivity by a peak V of the waveform using tone-burst and click stimuli. Results: The BC direct showed a different pattern between low and high frequencies. Precisely, its thresholds were 13.25 and 12.25 dB HL at 0.5 and 1 kHz, respectively, but 19 and 19.75 dB HL at 2 and 4 kHz, respectively. A significant positive correlation existed between BC direct and PTA at 1 kHz, which was also correlated with ABR. Conclusions: Based on the current data, the thresholds of BC direct were similar to BC PTA at low frequencies and BC ABR at high frequencies. The thresholds of BC direct might be predictable at approximately 5 dB higher (or lower) than that in PTA, although a large data set is required for standardization.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.434-442
• /
• 2019

The present study investigated a novel calcium hydroxide-coated dairy manure-derived biochar (Ca-BC) for adsorption of phosphate from water and dairy wastewater. The Ca-BC showed much higher adsorption of phosphate than that of dairy manure-derived biochar. The Ca-BC possessed mainly the calcium hydroxide and various functional groups resulting in high reactivity between phosphate and calcium hydroxide in the Ca-BC. The adsorption of phosphate onto Ca-BC followed pseudo-second order kinetic and Freundlich isotherm models indicating chemisorptive interaction occurred on energetically heterogeneous surface of Ca-BC. The maximum adsorption capacity of the Ca-BC was higher than those of iron oxide and zinc oxide-coated biochars, but lower than those of CaO- and MgO-coated biochars. However, the Ca-BC showed high reactivity per surface area for adsorption of phosphate indicating importance of surface functionalization of biochar. On the other hand, the adsorption of phosphate in dairy wastewater on Ca-BC was lower than that in water owing to competition between other anions in wastewater and phosphate. Overall, the Ca-BC would be a low cost and effective adsorbent for recovery of phosphate from water and wastewater.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.94-99
• /
• 2003

The effect of medium composition on the production of bacterial cellulose (BC) by Gluconacetobacter hansenii PJK was investigated. The addition of yeast extract and peptone in the medium increased the production yield (Y/sub p/s/) of BC. The amount of BC produced by G. hansenii PJK was constant if the initial pH of the medium was in the range 4.5 to 6.0. Strains from the supernatant of the culture medium produced more BC than those from inside the BC. BC production was dependent on glucose metabolism, and the addition of fructose or lactate as a carbon source converted cells to Cel/sup -/ mutants. Cel/sup -/ mutants produced by the addition of fructose or lactate to the medium caused 73% or 30% decreases in BC production, respectively. The addition of succinate, which is one of the constituents of the TCA cycle, did not affect the production of BC.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.127-132
• /
• 2003

The effect of 4 kinds of alcohols was investigated on the production of bacterial cellulose (BC) by Gluconacetobacter hansenii PJK. The addition of alcohols and acetic acid to medium caused the pellets of bacterial cellulose to aggregate into a lump, which could be easily separated from the culture medium. The growth rate of cells and the production yield of BC increased in the medium containing ethanol. Other alcohols in the medium decreased cell growth and the cellulose production rate, because of their toxic effects. The addition of ethanol depressed the conversion of a $\textrm{Cel}^{+}$ cell to a $\textrm{Cel}^{-}$ mutant in shaking culture. Cells subcultured three in a medium containing ethanol produced BC without any loss of BC production yield.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.440-449
• /
• 2008

This paper is to analyze the feasibility of area of agricultural and fishing village as the link of the broadband convergence network(BcN) build-up. For the project feasibility analysis, we utilized the questionnaire of experts and drew the new index of evaluation. By using the AHP technique, we evaluated the feasibility. And by reviewing precedent papers and references, it drew proper evaluation criteria and evaluated BcN feasibility using AHP; economic feasibility, technological feasibility and policy feasibility were figured out as main criteria and resulted evaluation criteria for BcN feasibility. As a result, we found the business enforcement was exposed to be apposite and inconsistency index showing the reliability of the analysis was showed up lowly as 0.0566. Afterward, the BcN business of construction contribute to the living improvement of a nation. Moreover, there will be a value as the basic materials for reasonably propelling the BcN project.